RB161L-40 Diodes Schottky barrier diode RB161L-40 zApplications General rectification z Land size figure (Unit : mm) z Dimensions (Unit : mm) 2.0 3 3 ① ② 0.1±0.02 0.1 4.2 5.0±0.3 4.5±0.2 zFeatures 1) Small power mold type. (PMDS) 2) Low VF. 3) High reliability. 1.2±0.3 2.0 2.6±0.2 PMDS 2.0±0.2 1.5±0.2 zConstruction Silicon epitaxial planar zStructure ROHM : PMDS JEDEC : SOD-106 Manufacture Date ① ② z Taping specifications (Unit : mm) 2.0±0.05 0.3 φ1.55±0.05 12±0.2 5.5±0.05 5.3±0.1 0.05 9.5±0.1 1.75±0.1 4.0±0.1 φ1.55 2.9±0.1 4.0±0.1 2.8MAX zAbsolute maximum ratings (Ta=25°C) Parameter Reverse voltage (repetitive peak) Reverse voltage (DC) Average rectified forward current Forward current surge peak （60Hz・1cyc） Junction temperautre Storage tempereature Symbol VRM VR Io IFSM Tj Tstg (*1)Mounted on epoxy board. 180°Half sine wave Limits 40 20 1 70 125 -40 to +125 Unit V V A A ℃ ℃ zElectrical characteristics (Ta=25°C) Parameter Forward voltage Symbol VF Min. - Typ. - Max. 0.40 Unit V Reverse current IR - - 1 mA Conditions IF=1.0A VR=20V Rev.H 1/3 RB161L-40 Diodes zElectrical characteristic curves (Ta=25°C) Ta=75℃ 1000000 Ta=125℃ Ta=25℃ Ta=-25℃ 0.01 10000 Ta=75℃ 1000 Ta=25℃ 100 Ta=℃ 10 100 10 1 0 200 400 FORWARD VOLTAGE：VF(mV) VF-IF CHARACTERISTICS 1 5 600 10 15 20 25 30 0 340 AVE:347.7mV 330 400 350 300 250 200 AVE:110.3uA 150 100 320 270 250 240 AVE:251.8pF 230 220 210 200 Ct DISPERSION MAP 200 AVE:127.0A Ta=25℃ IF=0.5A IR=1A Irr=0.25*IR n=10pcs 15 10 5 AVE:9.3ns PEAK SURGE FORWARD CURRENT:IFSM(A) 50 RESERVE RECOVERY TIME:trr(ns) 8.3ms 100 0 0 Ifsm 150 8.3ms 8.3ms 1cyc 100 50 0 1 IFSM DISPERSION MAP trr DISPERSION MAP t 100 50 0 1 10 TIME:t(ms) IFSM-t CHARACTERISTICS 100 100 0.9 Mounted on epoxy board Rth(j-c) 10 IM=100mA 1 1ms IF=0.5A D=1/2 0.7 DC Sin(θ＝180) 0.6 0.5 0.4 0.3 0.2 time 0.1 300us 0.1 0.01 0.8 Rth(j-a) 100 FORWARD POWER DISSIPATION:Pf(W) TRANSIENT THAERMAL IMPEDANCE:Rth (℃/W) PEAK SURGE FORWARD CURRENT:IFSM(A) Ifsm 150 10 NUMBER OF CYCLES IFSM-CYCLE CHARACTERISTICS 1 1000 200 30 260 0 20 1cyc 25 Ta=25℃ f=1MHz VR=0V n=10pcs IR DISPERSION MAP Ifsm 20 280 50 VF DISPERSION MAP 150 15 290 CAPACITANCE BETWEEN TERMINALS:Ct(pF) 350 Ta=25℃ VR=20V n=30pcs 450 REVERSE CURRENT:IR(uA) 360 10 300 500 Ta=25℃ IF=1A n=30pcs 5 REVERSE VOLTAGE:VR(V) VR-Ct CHARACTERISTICS REVERSE VOLTAGE：VR(V) VR-IR CHARACTERISTICS 370 FORWARD VOLTAGE:VF(mV) Ta=125℃ CAPACITANCE BETWEEN TERMINALS:Ct(pF) 0.1 100000 0.001 PEAK SURGE FORWARD CURRENT:IFSM(A) 1000 Ta=150℃ f=1MHz Ta=150℃ REVERSE CURRENT:IR(uA) FORWARD CURRENT:IF(A) 1 0 0.1 1 10 100 TIME:t(s) Rth-t CHARACTERISTICS 1000 0 0.5 1 1.5 AVERAGE RECTIFIED FORWARD CURRENT：Io(A) Io-Pf CHARACTERISTICS Rev.H 2 2/3 RB161L-40 Diodes 50 3.0 D=1/2 DC 20 Sin(θ＝180) 10 2.5 2.0 DC 1.5 Io t T VR D=t/T VR=20V Tj=125℃ D=1/2 1.0 Sin(θ＝180) 0.5 0 10 20 30 40 REVERSE VOLTAGE:VR(V) VR-PR CHARACTERISTICS 0A 0V 2.5 2 DC Io t T VR D=t/T VR=20V Tj=125℃ 1.5 D=1/2 1 0.5 Sin(θ＝180) 0 0.0 0 AVERAGE RECTIFIED FORWARD CURRENT:Io(A) 30 AVERAGE RECTIFIED FORWARD CURRENT:Io(A) REVERSE POWER DISSIPATION:PR (W) 40 3 0A 0V 0 25 50 75 100 AMBIENT TEMPERATURE:Ta(℃) Derating Curveﾞ(Io-Ta) 125 0 25 50 75 100 CASE TEMPARATURE:0T(℃) Derating Curveﾞ(Io-Tc) 125 30 No break at 30kV ELECTROSTATIC DISCHARGE TEST ESD(KV) 25 20 15 10 AVE:12.3kV 5 0 C=200pF R=0Ω C=100pF R=1.5kΩ ESD DISPERSION MAP Rev.H 3/3 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of which would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM cannot be held responsible for any damages arising from the use of the products under conditions out of the range of the specifications or due to non-compliance with the NOTES specified in this catalog. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact your nearest sales office. ROHM Customer Support System www.rohm.com Copyright © 2008 ROHM CO.,LTD. THE AMERICAS / EUROPE / ASIA / JAPAN Contact us : webmaster@ rohm.co. jp 21 Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan TEL : +81-75-311-2121 FAX : +81-75-315-0172 Appendix1-Rev2.0