Switch Modules – QS & RS RS QS The rocker switch modules RS1 and RS2 are designed to be installed into front panels, multi-function grips or other switching units. The quadrant switch modules QS1 and QS2 are designed to be installed into front panels, multi-function grips or other switching units. RS1 This module is standard rocker switch with a single switch function in both directions. QS1 This module is a quad switch similar to a “mirror switch” made of four K12 switches, designed for 4 switching functions (e.g. for movements in four directions: up, down, left and right). RS2 With the RS2 a double switch function is available in both directions. QS2 This module is similar to the QS1 but has a double switch function and is made up with eight K12 switches allowing additional functions in each direction. Technical Data Types Dimensions (length, width, height) M-QS-0744 RS1 two K12 switches, one switching function per direction RS2 four K12 switches, two switching functions per direction QS1 four K12 switches, one switching function per direction QS2 eight K12 switches, two switching functions per direction RS QS 43 x 40.7 x 27.55 mm 58.9 x 43 x 27.5 mm Operating life Operating temperature - Storage - Working > 1 million cycles Protection Level With sealing: IP65 (from above when mounted) Main features of K12 Tactile feedback, positive snap-point (more technical details see datasheet for K12 switches) - 40°C to 85°C - 25°C to 85°C www.ck-components.com Switch Modules – QS & RS Ordering code Example 1 Type Quadrant Switch (QS) QS 1 = four K12 switches QS 2 = eight K12 switches Rocker Switch (RS) RS 1 = two K12 switches RS 2 = four K12 switches 2 Standard cap KQS1 = for QS KRSA = for RS 3 Cap colour BK = black 4 Cap decals 5 Module mounted N = none S = standard decals (arrows)* C … = customized C = standard mounted * see drawing below M-QS-0744 www.ck-components.com 1 2 3 RS1 KRSA BK 4 S 5 C