VISHAY 015-1-11

Model 15
www.vishay.com
Vishay Spectrol
Rectangular 10 Turn Dial (3 Digit), (4 Digit) 100 Turn
FEATURES
•
•
•
•
•
•
•
QUICK REFERENCE DATA
Sensor type
Market appliance
OPERATIONAL SPECIFICATIONS
Operation 3 digit
(10 turn)
Left digit
Right two digits
DIALS
Industrial
Dimensions
25.4 mm x 49.5 mm
PARAMETER
Numerals
The numerals shall be white
on a black background and
0.130" H (3.30 cm)
Mounting
The spring detented knob shall be
removed using a straight pull, exposing
two no. 4 to 40 hex socket set screws
for mounting the dial directly to the
component shaft
Complete revolutions of turning knob
Percent of revolution
The unit registers a total count of 999
Operation 4 digit
(100 turn)
Left two digits
Right two digits
MECHANICAL SPECIFICATIONS
Weight
Rectangular digital scale
1" wide
1/ " or 1/ " or metric (6 mm) shaft adapter
4
8
Open or clear plastic window bezel
Black anodize finish with standard or white bezel trim
Satin clear anodize finish
Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
Complete revolutions of turning knob
Percent of revolution
The unit registers a total count of 9999
The indication shall increase with clockwise
rotation of the turning knob
Graduation lines adjacent to the numerals on
the right digit wheel indicate settings 0.2 % of
a revolution of the turning knob
Dial phased by rotating the exposed
component shaft to correspond with the
desired reading on the dial prior to tightening
the set screws
Rotation
Accuracy
Phasing
1.6 oz. (45.36 g)
DIMENSIONS in inches (millimeters)
0.812 MIN.
(20.62)
COVER
± 0.015
± 0.015
0.125 (3.18)
0.093 (2.36)
BASE
0.094
(2.39)
0.750
(19.05)
1.000
(25.40)
0.625
(15.88)
+ 0.000
- 0.015
WINDOW BEZEL
± 0.015
1.280 (32.51)
1.750
(44.45) 1.950 MAX.
TURNING KNOB
Ø 0.495 0.695 Ø (17.65)
(12.57)
0.250 Ø (6.35) - 0.00
0.128 Ø
(NO. 30 DRILL) (3.25)
± 0.002
0.750 (19.05)
(49.53)
+ 0.002
1
CL COMPONENT SHAFT HOLE
0.165 (4.19)
0.135 (3.42)
± 0.015
MOUNTING
HOLE PATTERN
SETSCREWS 2 PLCS
90° APART
BRAKE LEVER KNOB
ON
OFF
TRAVEL
5.95 (15.11)
1.000 MAX.
(25.40)
ORDERING INFORMATION/DESCRIPTION
15
MODEL
Example: 15 - A - 1 - 1
A
SHAFT DIAMETER
AND NUMERCIAL DISPLAY
A 1/4" dia. 3 digit
B 1/4" dia. 4 digit
C 1/8" dia. 3 digit
D 1/8" dia. 4 digit
E 6 mm dia. 3 digit
F 6 mm dia. 4 digit
1
1
B010
e
BEZEL
FINISH
PACKAGING
LEAD FINISH
1. Satin clear anodize
1. Open
3. Black anodize, white
3. Clear plastic window
bezel trim
5. Black anodize
SAP PART NUMBERING GUIDELINES
15
A
1
1
B10
MODEL
SHAFT DIAMETER
BEZEL
FINISH
PACKAGING
Revision: 04-Jul-12
Document Number: 57086
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000