1N5415 THRU 1N5420 GLASS PASSIVATED FAST SWITCHING RECTIFIER Reverse Voltage - 50 to 600 Volts Forward Current - 3.0 Amperes * FEATURES ♦ Glass passivated cavity-free junction ♦ High temperature metallurgically bonded construction ♦ Hermetically sealed package ♦ Capable of meeting environmental standards of MIL-S-19500 ♦ Fast switching for high efficiency ♦ High temperature soldering guaranteed: 350°C/10 seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension P A T E N T E D Case Style G4 1.0 (25.4) MIN. 0.180 (4.6) 0.115 (2.9) DIA. 0.300 (7.6) MAX. 0.042 (1.07) 1.0 (25.4) MIN. 0.038 (0.962) DIA. MECHANICAL DATA Case: Solid glass body Terminals: Solder plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.037 ounce, 1.04 grams Dimensions in inches and (millimeters) *Brazed-lead assembly is covered by Patent No. 3,930,306 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS 1N5415 1N5416 1N5417 1N5418 1N5419 1N5420 UNITS VRRM 50 100 200 400 500 600 Volts VRMS 35 70 140 280 350 420 Volts *Maximum DC blocking voltage VDC 50 100 200 400 500 600 Volts *Minimum reverse breakdown voltage at 50µA VBR 55 110 220 440 550 660 Volts *Maximum average forward rectified current 0.375” (9.5mm) lead lengths atTA=55°C I(AV) 3.0 Amps IFSM 80.0 Amps VF 1.10 1.50 Volts IR 1.0 20.0 2.0 µA *Maximum repetitive peak reverse voltage Maximum RMS voltage Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) at TA=100°C Maximum instantaneous forward voltage at 3.0A* 9.0A Maximum DC reverse current at rated DC blocking voltage *TA=25°C TA=100°C *TA=175°C *Maximum reverse recovery time (NOTE 1) *Maximum junction capacitance (NOTE 2) Typical thermal resistance (NOTE3) *Operating and storage temperature range trr CJ 150 200 175 120 400 110 100 ns pF RΘJA 22.0 °C/W TJ,TSTG -65 to +175 °C NOTES: (1) Reverse recovery test conditions: IF=0.5A, IR= 1.0A, Irr=0.25A (2) Measured at 1.0 MHZ and applied reverse voltage of 12.0 Volts (3) Thermal resistance from junction to ambient at 0.375" (9.5mm) lead length, with both leads to heat sink *JEDEC registered values 4/98 150 250 RATINGS AND CHARACTERISTIC CURVES 1N5415 THRU 1N5420 FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 4.0 L=0.375" (9.5mm) 3.0 0.8 x 0.8 x .040" (20 x 20 x 1mm) COPPER HEATSINKS 2.0 1.0 RESISTIVE OR INDUCTIVE LOAD 0 0 25 50 75 100 125 150 175 200 AMBIENT TEMPERATURE,°C PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD CURRENT, AMPERES FIG. 1 - FORWARD CURRENT DERATING CURVE 200 TA=100°C 8.3ms SINGLE HALF-WAVE SINE-WAVE (JEDEC Method) 100 10 1 10 100 NUMBER OF CYCLES AT 60 Hz FIG. 4 -TYPICAL REVERSE CHARACTERISTICS FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 30 50 10 AVERAGE REVERSE CURRENT, MICROAMPERES INSTANTANEOUS FORWARD CURRENT, AMPERES 10 TJ=25°C PULSE WIDTH=300µs 1%DUTY CYCLE 1 0.1 TJ=150°C TJ=125°C 1 TJ=75°C 0.1 TJ=25°C 0.01 0.4 0.01 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 FIG. 5 - TYPICAL JUNCTION CAPACITANCE 100 JUNCTION CAPACITANCE, pF TJ=25°C f=1.0 MHz Vsig=50mVp-p 10 REVERSE VOLTAGE, VOLTS 20 40 60 80 PERCENT OF RATED PEAK REVERSE VOLTAGE, % INSTANTANEOUS FORWARD VOLTAGE, VOLTS 10 1 0 100 100