2150, 2155 & 2160 Vishay Micro-Measurements 2100 System Rack Adapters and Cabinets FEATURES • Prewired • Rack mountable Model 2150 Front • Up to 10 channels • Optional enclosures Model 2150 Rear Model 2160 DESCRIPTION Model 2150: A prewired rack adapter which accepts one Model 2110B, or 2111, and any combination of five Model 2120B, 2130, or 2131 plug-in modules. It has its own fuse and power cord and can be housed in any standard 19-in [483 mm] electronic equipment rack. Model 2155: A sturdy cabinet for enclosing a complete eight- or tenchannel system for free-standing operation, while providing additional mechanical protection and increased portability. A Model 2150 is required. Model 2160: A prewired, fused enclosure which houses one Model 2110B or 2111, one 2130 or 2131, and one 2120B module. A carrying handle ensures maximum portability. An additional snap-down bail support on the bottom can be used to elevate the 2160 for excellent work efficiency during bench-top operation. The Model 2160 (shown with the 2110B, 2131, and 2120B modules) would be substituted for the Model 2150 when two or four channels and maximum portability are required. SPECIFICATIONS 2150 Specifications Power: 2 ft (0.6 m) 3-wire line cord; 10 ft (3 m) extension available. Fuse: 1A size 3 AG (32 x 6.5 diameter mm). Receptacle to accept line cord from adjacent 2150 Rack Adapter. 2155 Specifications Size: 5.25 H x 19 W x 13 D in (133 x 483 x 330 mm). Weight: 18.8 lb (9.5 kg). Size: 5.25 H x 19 W x 14.17 D in (133 x 483 x 360 mm). 2160 Specifications Size: 5.55 H x 8.75 W x 13.80 D in (141 x 222 x 350 mm). Weight: 6.6 lb (3.0 kg). Weight: 5.2 lb (2.4 kg). Document Number: 11253 Revision 20-Nov-03 [email protected] www.vishaymg.com 1