GIB1401 thru GIB1404 Vishay General Semiconductor Ultrafast Plastic Rectifier FEATURES • Glass passivated chip junction TO-263AB • Ultrafast recovery time • Low switching losses, high efficiency K • Low leakage current • High forward surge capability 2 • Meets MSL level 1, per J-STD-020, LF maximum peak of 245 °C 1 • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC PIN 1 PIN 2 HEATSINK TYPICAL APPLICATIONS For use in high frequency rectifier of switching mode power supplies, inverters, free-wheeling diodes, dc-to-dc converters, and other power switching application. PRIMARY CHARACTERISTICS IF(AV) 8.0 A VRRM 50 V to 200 V IFSM 125 A trr 35 ns VF 0.895 V TJ max. 150 °C MECHANICAL DATA Case: TO-263AB Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test, HE3 suffix for high reliability grade (AEC Q101 qualified), meets JESD 201 class 2 whisker test Polarity: As marked Mounting Torque: 10 in-lbs maximum MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL GIB1401 GIB1402 GIB1403 GIB1404 UNIT Maximum repetitive peak reverse voltage VRRM 50 100 150 200 V Maximum RMS voltage VRMS 35 70 105 140 V Maximum DC blocking voltage VDC 50 100 150 200 V Maximum average forward rectified current at TC = 125 °C IF(AV) 8.0 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 125 A TJ, TSTG - 65 to + 150 °C Operating and storage temperature range Document Number: 88632 Revision: 30-Aug-07 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 1 GIB1401 thru GIB1404 Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS Maximum instantaneous forward voltage IF = 4 A IF = 8 A IF = 4 A IF = 8 A Maximum DC reverse current at rated DC blocking voltage TJ = 25 °C TJ = 25 °C TJ = 100 °C TJ = 100 °C TC = 25 °C TC = 100 °C SYMBOL GIB1401 GIB1402 GIB1403 GIB1404 UNIT VF 0.900 0.975 0.800 0.895 V IR 5.0 150 µA Maximum reverse recovery time IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A trr 35 ns Typical junction capacitance 4 V, 1 MHz CJ 85 pF THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Typical thermal resistance (1) GIB1401 RθJC GIB1402 GIB1403 GIB1404 UNIT 2.25 °C/W Note: (1) Thermal resistance from junction to case mounted on heatsink ORDERING INFORMATION (Example) PACKAGE PREFERRED P/N UNIT WEIGHT (g) PACKAGE CODE BASE QUANTITY DELIVERY MODE 1.33 45 50/tube Tube 1.33 81 900/reel Tape and reel 1.33 45 50/tube Tube 81 900/reel Tape and reel TO-263AB GIB1401-E3/45 TO-263AB GIB1401-E3/81 TO-263AB GIB1401HE3/45 (1) TO-263AB (1) 1.33 GIB1401HE3/81 Note: (1) Automotive grade AEC Q101 qualified RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 150 Resistive or Inductive Load Peak Forward Surge Current (A) Average Forward Rectified Current (A) 12 10 Infinite Heatsink Mounting, TC 8 6 Free Air Rating, TA P.C.B. Mounting 4 2 0 TC = 125 °C 8.3 ms Single Half Sine-Wave 125 100 75 50 25 0 0 25 50 75 100 125 150 1 10 100 Case Temperature (°C) Number of Cycles at 60 Hz Figure 1. Maximum Forward Current Derating Curve Figure 2. Maximum Non-Repetitive Peak Forward Surge Current www.vishay.com 2 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 88632 Revision: 30-Aug-07 GIB1401 thru GIB1404 Vishay General Semiconductor 1000 TJ = 125 °C TJ = 25 °C Junction Capacitance (pF) Instantaneous Forward Current (A) 100 10 Pulse Width = 300 µs 1 % Duty Cycle 1 0.1 0.01 0.4 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 100 10 0.6 0.8 1.0 0.1 1.2 1 10 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Figure 3. Typical Instantaneous Forward Characteristics Figure 5. Typical Junction Capacitance Instantaneous Reverse Leakage Current (µA) 100 TJ = 125 °C 10 TJ = 100 °C 1 0.1 TJ = 25 °C 0.01 0 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Figure 4. Typical Reverse Leakage Characteristics PACKAGE OUTLINE DIMENSIONS in inches (millimeters) TO-263AB 0.411 (10.45) 0.380 (9.65) 0.190 (4.83) 0.160 (4.06) 0.245 (6.22) MIN. 0.055 (1.40) 0.045 (1.14) Mounting Pad Layout 0.42 (10.66) MIN. K 0.360 (9.14) 0.320 (8.13) 1 K 2 0.624 (15.85) 0.591 (15.00) 0 to 0.01 (0 to 0.254) 0.110 (2.79) 0.090 (2.29) 0.021 (0.53) 0.014 (0.36) 0.037 (0.940) 0.027 (0.686) 0.105 (2.67) 0.095 (2.41) Document Number: 88632 Revision: 30-Aug-07 0.055 (1.40) 0.047 (1.19) 0.205 (5.20) 0.195 (4.95) 0.140 (3.56) 0.110 (2.79) 0.33 (8.38) MIN. 0.670 (17.02) 0.591 (15.00) 0.15 (3.81) MIN. 0.08 (2.032) MIN. 0.105 (2.67) 0.095 (2.41) For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 3 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1