Data Sheet: F-LAN The F-1G is used for transporting a Gigabit Ethernet port over a fiber from one location to another. The units work in pairs with a transceiver on each end of the fiber link. Any network cable connected to the RJ-45 port on one unit is transported to the corresponding RJ-45 port on the second unit. Our units work transparently, meaning they are non-IP addressable and any network traffic traveling through the fiber link remains unmodified. Any two devices that are connected over the fiber link appear to be directly connected by a standard network cable. This is useful for connecting switches or other network devices in different buildings or for extending an IP network to a far away location. We also offer custom equipment to incorporate more signals onto a single fiber. In addition to Ethernet you can also carry video and audio channels, telephone lines, E1 or T1 links, or even satellite signals all over a single fiber. Our units have a maximum transmission distance of 120 km when used with singlemode fiber. We feature easy to read diagnostic LED's for continuous monitoring of link status and network speed. Contact a sales representative for more information. Up to 120 Km SingleMode Fiber Typical F-LAN Application Technical Specifications Standards: Connection Ports: Registration: LED Indicators: IEEE 802.3z 1000BASE-FX IEEE 802.3ab 1000BASE-T Fiber Ports SC/PC or SC/APC FCC Part 15 Class A, CE, UL, CUL, TUL GigE, Power, Link Operating Temp: Storage Temp: Operating Humidity: Storage Humidity: Power Requirements: Dimensions: 0 – 50 (°C) -20 – 70 (°C) 0 – 90 (%) 0 – 90 (%) 110/240V Auto Sense 480mmX225mmX44mm Data Sheet: F-LAN www.thorfiber.com