Kaga Electronics (USA) Inc. 2480 N. First St, Suite #100 San Jose, CA 95131 Tel: (408)570-0955 Fax: (408)570-0186 www.volgen.com 5 WATTS OUTPUT POWER 2:1 AND 4:1 WIDE INPUT VOLTAGE RANGE FIVE-SIDED SHIELD HIGH EFFICIENCY UP TO 84% STANDARD 24 PIN DIP PACKAGE FIXED SWITCHING FREQUENCY T E C H N I C A L S P E C I F I C AT I O N All specifications are typical at nominal input, full load and 25ºC otherwise noted GENERAL SPECIFICATIONS OUTPUT SPECIFICATIONS Output power 5 Watts, max Voltage accuracy Full load and nominal Vin ± 1% Minimum load (Note 1) LL to HL at Full Load ± 0.2% Load regulation 25% to 100% FL Single Dual Asymmetrical load 25% / 100% FL ± 0.5% ± 1% Ripple and noise 20MHz bandwidth Transient response recovery time 25% load step change % of FL at nominal input Short circuit protection Input voltage range MT5A-W 1600VDC, min 1600VDC, min Input ( Output ) to Case 9 Isolation resistance 10 ohms, min Isolation capacitance 300pF, max Switching frequency 300KHz, typ ± 5% Nickel-coated copper 50mVp-p Base material Non-conductive black plastic 200uS 170%, typ Continuous, automatics recovery INPUT SPECIFICATIONS MT5A See table Input to Output Case material ±0.02% / ºC, max Temperature coefficient Over load protection Isolation voltage 10% of FL Line regulation Cross regulation(Dual) Efficiency Potting material Epoxy (UL94-V0) 1.25 X 0.80 X 0.40 Inch (31.8 X 20.3 X 10.2 mm) Dimensions Weight 16g (0.55oz) 6 MTBF (Note 3) 3.165 x 10 hrs ENVIRONMENTAL SPECIFICATIONS 12V nominal input 24V nominal input 48V nominal input 24V nominal input 48V nominal input Input filter 9 – 18VDC 18 – 36VDC 36 – 75VDC 9 – 36VDC 18 – 75VDC Pi type Operating temperature range Maximum case temperature Input surge voltage 100mS max 36VDC 50VDC 100VDC Thermal impedance Input reflected ripple Nominal Vin and full load 20mAp-p Vibration Power up 450mS, max +100ºC Storage temperature range 12V input 24V input 48V input Nominal Vin and Start up time constant resistive load Standard -25ºC~+85ºC (with derating) M1 (Note 2) -40ºC~+85ºC (non-derating) M2 (W series) -40ºC~+85ºC (with derating) -55ºC ~ +105ºC Nature convection Thermal shock 20ºC/watt MIL-STD-810D 10~55Hz, 10G, 30minitues along X,Y and Z Relative humidity 5% to 95% RH EMC CHARACTERISTICS Conducted emissions EN55022 Class A Radiated emissions EN55022 Class A ESD EN61000-4-2 Perf. CriteriaB Radiated immunity EN61000-4-3 Perf. CriteriaA Fast transient EN61000-4-4 Perf. CriteriaB Surge EN61000-4-5 Perf. CriteriaB Conducted immunity EN61000-4-6 Perf. CriteriaA Kaga Electronics (USA) Inc. 2480 N. First St, Suite #100 San Jose, CA 95131 Tel: (408)570-0955 Fax: (408)570-0186 www.volgen.com Model Number Input Range Output Voltage Output Current Input Current (4) Efficiency (5) (%) MT5A-1233SI MT5A-1205SI MT5A-1212SI MT5A-1215SI MT5A-1205WI MT5A-1212WI MT5A-1215WI MT5A-2433SI (W) MT5A-2405SI (W) MT5A-2412SI (W) MT5A-2415SI (W) MT5A-2405WI (W) MT5A-2412WI (W) MT5A-2415WI (W) MT5A-4833SI (W) MT5A-4805SI (W) MT5A-4812SI (W) MT5A-4815SI (W) MT5A-4805WI (W) MT5A-4812WI (W) MT5A-4815WI (W) 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 18 – 36 (9 – 36) VDC 18 – 36 (9 – 36) VDC 18 – 36 (9 – 36) VDC 18 – 36 (9 – 36) VDC 18 – 36 (9 – 36) VDC 18 – 36 (9 – 36) VDC 18 – 36 (9 – 36) VDC 36 – 75 (18 – 75) VDC 36 – 75 (18 – 75) VDC 36 – 75 (18 – 75) VDC 36 – 75 (18 – 75) VDC 36 – 75 (18 – 75) VDC 36 – 75 (18 – 75) VDC 36 – 75 (18 – 75) VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 1000mA 1000mA 470mA 400mA ± 500mA ± 230mA ± 190mA 1000mA 1000mA 470mA 400mA ± 500mA ± 230mA ± 190mA 1000mA 1000mA 470mA 400mA ± 500mA ± 230mA ± 190mA 382mA 563mA 603mA 649mA 563mA 597mA 594mA 194mA (191mA) 285mA (278mA) 305mA (305mA) 325mA (312mA) 274mA (282mA) 288mA (295mA) 308mA (297mA) 98mA (100mA) 143mA (138mA) 151mA (155mA) 162mA (160mA) 141mA (145mA) 147mA (151mA) 150mA (156mA) 76 78 82 81 78 81 84 75 (76) 77 (79) 81 (81) 81 (84) 80 (78) 84 (82) 81 (84) 74 (73) 77 (79) 82 (80) 81 (82) 78 (76) 82 (80) 83 (80) Note 2. 3. 4. 5. 6. The MT5A series required a minimum 10% loading on the output to maintain specified regulation. Operation under no-load condition will not damage these devices, however they may not meet all listed specification. BELLCORE TR-NWT-000332. Case 1： 50% Stress, Temperature at 40ºC. (Ground fixed and controlled environment) M1 version is more efficient, therefore, it can be operated in a more extensive temperature range than standard and M2 version Maximum value at nominal input voltage and full load of standard type. Typical value at nominal input voltage and full load There is no pin at PIN10 & PIN15 for MT5A-W series OUTPUT POWER (%) 1. 1. All dimensions in Inches (mm) 120 100 80 60 40 20 0 -25 -5 15 35 55 75 95 115 AMBIENT TEMPERATURE(℃) Tolerance : x.xx±0.02(x.x±0.5) x.xxx±0.01(x.xx±0.25) 2. Pin pitch tolerance ±0.014(0.35) DIP PIN CONNECTION PIN SINGLE DUAL PIN SINGLE DUAL 2 3 - INPUT - INPUT - INPUT - INPUT 23 22 + INPUT + INPUT + INPUT + INPUT 9 10 11 NC COMMON NC (Note6) NC (Note6) NC - OUTPUT 16 15 14 - OUTPUT COMMON NC (Note6) NC (Note6) + OUTPUT + OUTPUT