MUR440, MUR460 Vishay General Semiconductor Ultrafast Plastic Rectifier FEATURES • Glass passivated chip junction • Ultrafast reverse recovery time • Low forward voltage drop • Low leakage current • Low switching losses, high efficiency • High forward surge capability DO-201AD • Solder dip 275 °C max. 10 s, per JESD 22-B106 • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC • Halogen-free according to IEC 61249-2-21 definition TYPICAL APPLICATIONS PRIMARY CHARACTERISTICS IF(AV) 4.0 A VRRM 400 V and 600 V IFSM 150 A trr 50 ns VF 1.05 V TJ max. 175 °C For use in high frequency rectification and freewheeling application in switching mode converters and inverters for consumer, computer, and telecommunication. MECHANICAL DATA Case: DO-201AD Molding compound meets UL 94 V-0 flammability rating Base P/N-M3 - halogen-free, RoHS compliant, and commercial grade Terminals: Matte tin plated leads, solderable J-STD-002 and JESD 22-B102 M3 suffix meets JESD 201 class 1A whisker test per Polarity: Color band denotes cathode end MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL MUR440 MUR460 UNIT Maximum repetitive peak reverse voltage VRRM 400 600 V Working peak reverse voltage VRWM 400 600 V Maximum DC blocking voltage VDC 400 600 V Maximum average forward rectified current (fig. 1) IF(AV) 4.0 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 150 A TJ, TSTG - 65 to + 175 °C Operating junction and storage temperature range Document Number: 89187 Revision: 28-Apr-11 For technical questions within your region, please contact one of the following: www.vishay.com [email protected], [email protected], [email protected] 1 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MUR440, MUR460 Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS SYMBOL MUR440 TJ = 150 °C 3.0 A VF (1) Maximum instantaneous forward voltage TJ = 25 °C 4.0 A UNIT V 1.25 1.28 TJ = 25 °C Maximum instantaneous reverse current at rated DC blocking voltage MUR460 1.05 10 IR (1) TJ = 150 °C μA 250 Max. reverse recovery time IF = 0.5, IR = 1.0 A, Irr = 0.25 A trr 50 ns Maximum reverse recovery time IF = 1.0 A, dI/dt = 50 A/μs, VR = 30 V, Irr = 10 % IRM trr 75 ns Maximum forward recovery time IF = 1.0 A, dI/dt = 100 A/μs, recovery to 1.0 V tfr 50 ns Note (1) Pulse test: t = 300 μs, duty cycle 2 % p THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Typical thermal resistance junction to ambient RJA MUR440 (1) MUR460 UNIT 28 °C/W Note Lead length = 1/2" on PCB with 1.5" x 1.5" copper surface (1) ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE MUR460-M3/54 1.138 54 1400 13" diameter paper tape and reel MUR460-M3/73 1.138 73 1000 Ammo pack packaging RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 150 Peak Forward Surge Current (A) Average Forward Rectified Current (A) 6.0 L = 1/2" 4.0 P.C.B. with 1.5 x 1.5" Copper Pads 2.0 0 125 100 75 50 25 0 50 0 100 150 Ambient Temperature (°C) Fig. 1 - Forward Current Derating Curve www.vishay.com 2 200 1 10 100 Number of Cycles at 60 Hz Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current For technical questions within your region, please contact one of the following: Document Number: 89187 [email protected], [email protected], [email protected] Revision: 28-Apr-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MUR440, MUR460 Vishay General Semiconductor 1000 10 Junction Capacitance (pF) Instantaneous Forward Current (A) 100 TJ = 175 °C 1 TJ = 100 °C 0.1 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 100 TJ = 25 °C 0.01 0.2 10 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0.1 1.8 1 10 100 Reverse Voltage (V) Instantaneous Forward Voltage (V) Fig. 3 - Typical Instantaneous Forward Characteristics Fig. 5 - Typical Junction Capacitance per Leg Instantaneous Reverse Leakage Current (µA) 1000 100 TJ = 175 °C 10 TJ = 100 °C 1 0.1 TJ = 25 °C 0.01 0.001 0 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Fig. 4 - Typical Reverse Characteristics PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-201AD 1.0 (25.4) MIN. 0.210 (5.3) 0.190 (4.8) DIA. 0.375 (9.5) 0.285 (7.2) 1.0 (25.4) MIN. 0.052 (1.32) 0.048 (1.22) DIA. Document Number: 89187 Revision: 28-Apr-11 For technical questions within your region, please contact one of the following: www.vishay.com [email protected], [email protected], [email protected] 3 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1