Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 4212087078 Item: MS12-1B87-78L Coil Data at 20 °C Conditions Min Typ Max Unit Conditions Min Typ Max Unit Coil resistance Coil voltage Rated power Pull-In voltage Drop-Out voltage Contact data 87 Contact rating Switching voltage Switching current Carry current Contact resistance static Contact resistance dynamic Insulation resistance Breakdown voltage Operate time incl. bounce Release time Capacitance Special Product Data Isolation voltage Coil/Contact Connection pins Magnetic Shielding Remarks Environmental data Shock Vibration Operating temperature Storage temperature Soldering temperature Washability not to exceed their individual max.'s DC or Peak AC DC or Peak AC DC or Peak AC !" # $ Start Value ' ! & (! Start Value % & "#" & " ' RH <45 %, 100V - to all points according to IEC 255-5 measured with nominal voltage measured with no diode suppression @ 10 kHz across open switch ) *+ Conditions Min Typ Max according to IEC 255-5 Unit , FeNi-alloy tin plated Internal mu-metal shield Conditions Min Typ Max 1/2 sine wave duration 11ms from 10 - 2000 Hz / / 0 wave soldering max. 5 sec Unit . . . fully sealed Modifications in the sense of technical progress are reserved Designed at: Last Change at: 05.01.09 Designed by: Last Change by: KMUELLER Approval at: Approval at: 13.01.09 Approval by: Approval by: KOLBRICH Version: 01