Document 688-1 Power Inductor – HA3808-AL For TI TPS6211X Step-Down Converters • Designed for Texas Instruments TPS6211X 1.5A, 17-Vin 1 MHz Step-Down Converters with LBI and PG functions. • High current, magnetically shielded power inductor • Soft saturation makes them ideal for VRM/VRD applications Terminations RoHS compliant matte tin over nickel over copper. Weight 0.52 g Ambient temperature –40°C to +125°C. The part can be operated without damage as long as the part (ambient temperature plus temperature rise due to self heating) does not exceed +165°C. Storage temperature Component: –40°C to +165°C. Packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Mean Time Between Failures (MTBF) 26,315,789 hours Packaging 500/7″reel; 2500/13″ reel Plastic tape: 16 mm wide, 0.35 mm thick, 8 mm pocket spacing, 2.3 mm pocket depth PCB washing Only pure water or alcohol recommended Part number1 HA3808-AL_ Inductance SRF DCR (mOhm)3 typ4 ±20%2 (µH) typ max (MHz) 6.8 99.0 109 15 Isat (A)5 10% 20% drop drop 4.4 6.9 Irms (A)6 20°C 40°C rise rise 2.7 3.6 0.276 ±0,02 7,00 ±0,50 HA3808-ALC Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape (500 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (2500 parts per full reel). 2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc. 3. DCR measured on a micro-ohmmeter. 4. SRF measured using Agilent/HP 4395A or equivalent. 5. DC current at which the inductance drops the specified amount from its value without current. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. 0.078 2,00 682 1. When ordering, please specify packaging code: 0.276 ±0,008 7,00 ±0,20 0.079 max 2,00 0.182 4,62 0.094 2,40 0.236 6,00 0.260 6,60 0.118 3,00 0.079 2,00 Dimensions are in Specifications subject to change without notice. Please check our website for latest information. © Coilcraft, Inc. 2009 Recommended Land Pattern inches mm Document 688-1 Revised 05/18/09 Document 688-2 SMT Power Inductor – HA3808-AL Typical L vs Current Typical L vs Frequency 100 100 10 Inductance (µH) 1000 Inductance (µH) 1000 6.8 µH 1 10 6.8 µH 1 0.1 0.1 0.1 10 1 100 0.1 Current (A) 10 100 Frequency (MHz) Specifications subject to change without notice. Please check our website for latest information. © Coilcraft, Inc. 2009 1 Document 688-2 Revised 05/18/09