RENESAS HD74LV2GT241AUSE

HD74LV2GT241A
Dual Bus Buffer Noninverted with 3–state Output /
CMOS Logic Level Shifter
REJ03D0152–0200Z
(Previous ADE-205-679A (Z))
Rev.2.00
Oct.23.2003
Description
The HD74LV2GT241A has dual bus buffer noninverted with 3–state output in an 8 pin package. Two
noninverters are included in one circuit. Each circuit can be independently controlled by the enable signal
OE or OE, which enables outputs when receiving a low or high-level signal, respectively. The input
protection circuitry on this device allows over voltage tolerance on the input, allowing the device to be used
as a logic–level translator from 3.0 V CMOS Logic to 5.0 V CMOS Logic or from 1.8 V CMOS logic to
3.0 V CMOS Logic while operating at the high-voltage power supply. Low voltage and high-speed
operation is suitable for the battery powered products (e.g., notebook computers), and the low power
consumption extends the battery life.
Features
• The basic gate function is lined up as Renesas uni logic series.
• Supplied on emboss taping for high-speed automatic mounting.
• TTL compatible input level.
Supply voltage range : 3.0 to 5.5 V
Operating temperature range : –40 to +85°C
• Logic-level translate function
3.0 V CMOS logic → 5.0 V CMOS logic (@VCC = 5.0 V)
1.8 V or 2.5 V CMOS logic → 3.3 V CMOS logic (@VCC = 3.3 V)
• All inputs VIH (Max.) = 5.5 V (@VCC = 0 V to 5.5 V)
All outputs VO (Max.) = 5.5 V (@VCC = 0 V, Output : Z)
• Output current ±6 mA (@VCC = 3.0 V to 3.6 V), ±12 mA (@VCC = 4.5 V to 5.5 V)
• All the logical input has hysteresis voltage for the slow transition.
• Ordering Information
Part Name
Package Type
Package Code
Package
Abbreviation
Taping Abbreviation
(Quantity)
HD74LV2GT241AUSE
SSOP-8 pin
TTP-8DBV
US
E (3,000 pcs/reel)
Rev.2.00, Oct.23.2003, page 1 of 1
HD74LV2GT241A
Outline and Article Indication
• HD74LV2GT241A
Index band
Lot No.
Y M W
T 4 1
SSOP–8
Marking
Function Table
Inputs
OE
A
Output Y
L
L
L
L
H
H
H
X
Z
OE
A
Output Y
H
L
L
H
H
H
L
X
Z
Inputs
H : High level
L : Low level
X : Immaterial
Z : High impedance
Rev.2.00, Oct.23.2003, page 2 of 8
Y : Year code
(the last digit of year)
M : Month code
W : Week code
HD74LV2GT241A
Pin Arrangement
OE
1
8
VCC
A1
2
7
OE
Y2
3
6
Y1
GND
4
5
A2
(Top view)
Absolute Maximum Ratings
Item
Symbol
Ratings
Unit
Supply voltage range
VCC
–0.5 to 7.0
V
Input voltage range *1
VI
–0.5 to 7.0
V
VO
–0.5 to VCC + 0.5
V
Output voltage range
*1, 2
–0.5 to 7.0
Test Conditions
Output : H or L
VCC : OFF or output : Z
Input clamp current
IIK
–20
mA
VI < 0
Output clamp current
IOK
±50
mA
VO < 0 or VO > VCC
Continuous output current
IO
±25
mA
VO = 0 to VCC
Continuous current through
VCC or GND
ICC or IGND
±50
mA
Maximum power dissipation
*3
at Ta = 25°C (in still air)
PT
200
mW
Storage temperature
Tstg
–65 to 150
°C
Notes:
The absolute maximum ratings are values, which must not individually be exceeded, and
furthermore no two of which may be realized at the same time.
1. The input and output voltage ratings may be exceeded if the input and output clamp-current
ratings are observed.
2. This value is limited to 5.5 V maximum.
3. The maximum package power dissipation was calculated using a junction temperature of 150°C.
Rev.2.00, Oct.23.2003, page 3 of 8
HD74LV2GT241A
Recommended Operating Conditions
Item
Symbol
Ratings
Unit
Supply voltage
VCC
3.0 to 5.5
V
Input voltage
VIN
0 to 5.5
V
Output voltage
VOUT
0 to VCC
V
0 to 5.5
Test Conditions
Output : Z
Operating temperature
Topr
–40 to +85
°C
Input rise / fall time
tr, tf
0 to 100 (VCC = 3.0 to 3.6 V) ns
0 to 20 (VCC = 4.5 to 5.5 V)
Electrical Characteristics
• Ta = –40 to 85°C
Item
Symbol
VCC (V) *
Min
Typ
Max
Unit
Input voltage
VIH
3.0 to 3.6
1.5
—
—
V
4.5 to 5.5
2.0
—
—
3.0 to 3.6
—
—
0.6
4.5 to 5.5
—
—
0.8
3.3
—
0.10
—
5.0
—
0.15
—
Min to Max
VCC–0.1
—
—
3.0
2.48
—
—
IOH = –6 mA
4.5
3.8
—
—
IOH = –12 mA
Min to Max
—
—
0.1
IOL = 50 µA
3.0
—
—
0.44
IOL = 6 mA
4.5
—
—
0.55
IOL = 12 mA
VIL
Hysteresis voltage
Output voltage
VH
VOH
VOL
Test condition
V
VT+ – VT–
V
IOH = –50 µA
Input current
IIN
0 to 5.5
—
—
±1
µA
VIN = 5.5 V or GND
Off state output
current
IOZ
Min to Max
—
—
±5
µA
VO = 5.5 V or GND
Quiescent
supply current
ICC
5.5
—
—
10
µA
VIN = VCC or GND,
IO = 0
∆ICC
5.5
—
—
1.5
mA
One input VIN = 3.4 V,
other input VCC or
GND
Output leakage
current
IOFF
0
—
—
5
µA
VO = 5.5 V
Input capacitance
CIN
5.0
—
3.0
—
pF
VIN = VCC or GND
Note: For conditions shown as Min or Max, use the appropriate values under recommended operating
conditions.
Rev.2.00, Oct.23.2003, page 4 of 8
HD74LV2GT241A
Switching Characteristics
• VCC = 3.3 ± 0.3 V
Ta = 25°C
Test
Ta = –40 to 85°C
FROM
Item
Symbol
Min
Typ
Max
Min
Max
Unit Conditions (Input)
Propagation
delay time
tPLH
tPHL
—
4.5
9.0
1.0
10.5
ns
—
5.5
11.5
1.0
13.0
Enable time
tZH
tZL
—
4.5
9.0
1.0
10.5
—
6.0
11.5
1.0
13.0
tHZ
tLZ
—
4.0
10.0
1.0
11.5
—
5.5
13.5
1.0
15.0
Disable time
CL = 15 pF
TO
(Output)
A
Y
OE
or OE
Y
OE
or OE
Y
FROM
TO
CL = 50 pF
ns
CL = 15 pF
CL = 50 pF
ns
CL = 15 pF
CL = 50 pF
• VCC = 5.0 ± 0.5 V
Ta = 25°C
Test
Ta = –40 to 85°C
Item
Symbol
Min
Typ
Max
Min
Max
Unit Conditions (Input)
(Output)
Propagation
delay time
tPLH
tPHL
—
3.4
5.5
1.0
6.5
ns
A
Y
—
4.3
7.5
1.0
8.5
Enable time
tZH
tZL
—
3.4
5.1
1.0
6.0
Y
—
4.4
7.1
1.0
8.0
OE
or OE
tHZ
tLZ
—
3.2
6.8
1.0
8.0
4.0
8.8
1.0
10.0
OE
or OE
Y
—
Disable time
CL = 15 pF
CL = 50 pF
ns
CL = 15 pF
CL = 50 pF
ns
CL = 15 pF
CL = 50 pF
Operating Characteristics
• CL = 50 pF
Ta = 25°C
Item
Symbol
VCC (V) Min
Typ
Max
Unit
Test Conditions
Power dissipation
capacitance
CPD
5.0
11.5
—
pF
f = 10 MHz
Rev.2.00, Oct.23.2003, page 5 of 8
—
HD74LV2GT241A
Test Circuit
VCC
Pulse Generator
Z OUT = 50 Ω
See Function Table
Input
VCC
Output
1k Ω S1
CL =
15 or 50 pF
TEST
t PLH / t PHL
t ZH/ t HZ
t ZL / t LZ
Note: 1. C L includes probe and jig capacitance.
Rev.2.00, Oct.23.2003, page 6 of 8
OPEN
See under table
GND
*1
S1
OPEN
GND
VCC
HD74LV2GT241A
• Waveforms – 1
Input A
tr
tf
VI
90 %
Vref
90 %
Vref
10 %
10 %
t PLH
GND
t PHL
VOH
Output Y
50%
50%
VOL
• Waveforms – 2
tr
tf
VI
90 %
Vref
90 %
Vref
Input OE
10 %
10 %
GND
VCC
Input OE
50%
50%
GND
t LZ
t ZL
VCC
50%
Waveform – A
VOL + 0.3 V
t ZH
Waveform – B
t HZ
VOH – 0.3 V
50%
VOL
VOH
GND
INPUTS
VCC (V)
VI
Vref
t r / tf
3.3±0.3 2.5 V ≤ 3.0 ns
50%
≤ 3.0 ns
1.5 V
5.0±0.5
3V
Notes: 1. Input waveform : PRR ≤ 1 MHz, Zo = 50 Ω.
2. Waveform – A is for an output with internal conditions such that the output is low
except when disabled by the output control.
3. Waveform – B is for an output with internal conditions such that the output is high
except when disabled by the output control.
4. The output are measured one at a time with one transition per measurement.
Rev.2.00, Oct.23.2003, page 7 of 8
HD74LV2GT241A
Package Dimensions
2.0 ± 0.2
1.5 ± 0.2
+ 0.1
(0.17)
8 − 0.2 − 0.05
Package Code
JEDEC
JEITA
Mass (reference value)
Rev.2.00, Oct.23.2003, page 8 of 8
+ 0.1
0.13 − 0.05
0 − 0.1
0.7 ± 0.1 (0.4)
2.3 ± 0.1
(0.5) (0.5) (0.5)
3.1 ± 0.3
(0.4)
Unit: mm
TTP–8DBV


0.010 g
Sales Strategic Planning Div.
Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
Keep safety first in your circuit designs!
1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble
may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage.
Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary
circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap.
Notes regarding these materials
1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's
application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party.
2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data,
diagrams, charts, programs, algorithms, or circuit application examples contained in these materials.
3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of
publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is
therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product
information before purchasing a product listed herein.
The information described here may contain technical inaccuracies or typographical errors.
Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors.
Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor
home page (http://www.renesas.com).
4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to
evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes
no responsibility for any damage, liability or other loss resulting from the information contained herein.
5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life
is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a
product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater
use.
6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials.
7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and
cannot be imported into a country other than the approved destination.
Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited.
8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein.
http://www.renesas.com
RENESAS SALES OFFICES
Renesas Technology America, Inc.
450 Holger Way, San Jose, CA 95134-1368, U.S.A
Tel: <1> (408) 382-7500 Fax: <1> (408) 382-7501
Renesas Technology Europe Limited.
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, United Kingdom
Tel: <44> (1628) 585 100, Fax: <44> (1628) 585 900
Renesas Technology Europe GmbH
Dornacher Str. 3, D-85622 Feldkirchen, Germany
Tel: <49> (89) 380 70 0, Fax: <49> (89) 929 30 11
Renesas Technology Hong Kong Ltd.
7/F., North Tower, World Finance Centre, Harbour City, Canton Road, Hong Kong
Tel: <852> 2265-6688, Fax: <852> 2375-6836
Renesas Technology Taiwan Co., Ltd.
FL 10, #99, Fu-Hsing N. Rd., Taipei, Taiwan
Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999
Renesas Technology (Shanghai) Co., Ltd.
26/F., Ruijin Building, No.205 Maoming Road (S), Shanghai 200020, China
Tel: <86> (21) 6472-1001, Fax: <86> (21) 6415-2952
Renesas Technology Singapore Pte. Ltd.
1, Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632
Tel: <65> 6213-0200, Fax: <65> 6278-8001
© 2003. Renesas Technology Corp., All rights reserved. Printed in Japan.
Colophon 1.0