HDS Series Micro Mini Side Actuated Surface Mount Detect Switches Features/Benefits • Low profile package sits just • • • • • 1.4 mm off PCB Design allows top or side actuation Right and left options available Low actuation force, 30 grams max. Pick and place compatible, available in tape & reel packaging RoHS compliant and compatible ! NEW Typical Applications • Consumer electronics • Computers • Medical devices • Mobile Communications • ATCA and MicroTCA devices AdvancedTCA Specifications Materials CONTACT RATING: 1 mA 5 VDC BASE: LCP MECHANICAL AND ELECTRICAL LIFE: 100,000 cycles min. COVER: PA 46 (UL94V-0) CONTACT RESISTANCE: 1 Ω max. initial. ACTUATOR: PA 46 (UL94V-0) INSULATION RESISTANCE: 100 M Ω min. between adjacent contacts. MOVABLE BLADE: Stainless Steel, Ag over Ni plating. HDS001L: Gray R HDS001R: Black HDS001L: Gray HDS001R: Black TERMINALS: Phosphor Bronze, Ag plating. OPERATING TEMPERATURE: -40ºC to + 80ºC STORAGE TEMPERATURE: -40ºC to + 80ºC PACKAGING: tape & reel; 5,000 per reel. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. TRAVEL: Pre-travel .17 mm min. Overtravel: .5 mm min. Total: 1.07 mm Build-A-Switch Complete part numbers for HDS Series are shown below. PART NUMBER PACKAGING HDS001R TAPE & REEL SCHEMATIC A 0.05±0.05 HDS001R 3.5 B N.O. 2X ø 0.7 HOLE 2X PADS 1.87 1.5 ±0.2 0.75 0.85 0.3 0.7 0.4 1.7 RECOMMENDED STROKE ACTUATION 1.2 OR LESS 0.05±0.05 0.8 2X ø 0.6 ±0.05 0.8 1.6 B A 2X 0.9 4.2 2X 0.6 3 1.7 1.4 TOTAL TRAVEL POSITION ON STARTING POSITION 5.5 PCB MOUNTING R 2.27 2X 45˚ X 0.15 CHAMFER 0.5 1.6 ±0.05 2X 0.8 Detect E 1.2 OR LESS ACTUATION PART NUMBER PACKAGING HDS001L TAPE & REEL SCHEMATIC 0.05±0.05 0.05 ± 0.05 RECOMMENDED STROKE A ( 0.85) N.O. 1.7 2X ø 0.7 HOLE 2X PADS 1.6 2X 0.9 HDS001L 3.5 B 0.4 0.3 0.75 0.8 R 2.27 0.7 ø 0.6± 0.05 0.8 3 1.7 A 1.5± 0.2 1.87 2X 45˚ X 0.15 CHAMFER 1.6 ±0.05 B 2X 0.6 4.2 TOTAL TRAVEL POSITION 5.5 ON STARTING POSITION PCB MOUNTING 1.4 0.5 2X 0.8 Third Angle Projection Dimensions are shown: mm Specifications and dimensions subject to change E–8 www.ck-components.com HDS Series Micro Mini Side Actuated Surface Mount Detect Switches TAPE & REEL HDS001R 8 2 4 ø 1.5 +0.1 0 A 1.7 2.2 1.75 2.35 7.5 16 ± 0.3 3.2 B B 1.4 A 2.35 0.4 ±0.05 SECTION A-A FEED DIRECTION 6 3˚ TYP CARRIER REEL ø 380 3.7 1.2 SECTION B-B HDS001L 4 8 2 A 1.75 ø 1.5 +0.1 0 1.7 2.2 2.35 7.5 16 ± 0.3 3.2 B B A 2.35 1.4 0.4 ± 0.05 FEED DIRECTION SECTION A-A CARRIER REEL ø 380 6 3˚ TYP 3.7 1.2 SECTION B-B NOTE: Quantity per reel: 5,000 pieces E Detect Third Angle Projection Dimensions are shown: mm Specifications and dimensions subject to change E–9 www.ck-components.com