PANJIT SVC4200V

SVC4200V
LOW VF SCHOTTKY BARRIER RECTIFIER
200 Volts
CURRENT
4 Amperes
0.172(4.35)
0.167(4.25)
FEATURES
• Ideal for automated placement
0.048(1.20)
0.039(1.00)
• Low f orward voltage drop, low power los ses
• High efficiency Operation
• Low thermal resistance
0.243(6.15)
0.238(6.05)
• Lead free in comply with EU RoHS 2002/95/EC directives.
• Green molding compound as per IEC61249 Std. . (Halogen Free)
0.014(0.35)
0.009(0.25)
VOLTAGE
0.136(3.45)
Terminals : Solderable per MIL-STD-750, Method 2026
Weight: 0.0037 ounces, 0.1073 grams
0.052(1.30)
0.044(1.10)
0.083(2.10)
Case : TO-277, Plastic
0.076(1.95)
MECHANICAL DATA
0.128(3.25) 0.085(2.15)
0.262(6.65)
0.250(6.35)
0.043(1.10)
0.035(0.90)
0.183(4.65)
0.171(4.35)
MAXIMUM RATINGS (T A=25oC unless otherwise noted)
PARAMETER
SYMBOL
VALUE
UNIT
Maximum Recurrent Peak Reverse Voltage
VRRM
200
V
Maximum RMS Voltage
VRMS
140
V
VR
200
V
Average Rectified Output Current
I F(AV)
4
A
Peak Forward Surge Current:8.3ms single half sine-wave
superimposed on rated load (JEDEC method)
I FSM
100
A
RJC
RJA
4.5
110
TJ,TSTG
-55 to + 150
Maximum DC Blocking Voltage
Typical Thermal Resistance, Junction to Case
Junction to Ambient
(Note 1)
(Note 2)
Operating Junction Temperature and Storage Temperature range
o
C/W
o
C
NOTES:
2
1.Mounted on an FR4 PCB, s ingle-sided c opper, with 100c m c opper pad area.
2.Mounted on an FR4 PCB, single-sided copper, mini pad.
September 04,2012-REV.00
PAGE . 1
SVC4200V
ELECTRICAL CHARACTERISTICS (TA=25oC unless otherwise noted)
PARAMETER
SYMBOL
Break down voltage
Instantaneous forward voltage
Reverse current
TEST CONDITIONS
VBR
I R=5A
VF
I F=3A
I F=4A
I F=8A
I F=3A
I F=4A
I F=8A
TA=25oC
TA=25oC
TA=125oC
MIN.
TYP.
MAX.
UNIT
200
-
-
V
-
0.74
0.76
0.82
0.58
0.61
0.68
0.84
-
V
V
VR=160V
TA=25oC
-
0.1
-
uA
VR=200V
TA=25oC
TA=125oC
-
0.35
1
-
uA
mA
IR
IF, Forward Current (A)
5
4
3
2
1
0
0
25
50
75
100
125
150
TC, Case Temperature (°C)
CJ, Junction Capacitance (pF)
RATING AND CHARACTERISTIC CURVES
100
10
1
1
10
100
VR, Reverse Bias Voltage (V)
Fig.2 Typical Junction Capacitance
10
10000
IF, Forward Current (A)
IR,Reverse Current (uA)
Fig.1 Forward Current Derating Curve
1000
1000
100
TJ = 125°C
TJ = 150°C
10
TJ = 75°C
1
0.1
TJ = 25°C
0.01
20
40
60
80
September 04,2012-REV.00
1
TJ = 125°C
TJ = 75°C
0.1
TJ = 25°C
0.01
100
Percent of Rated Peak Reverse Voltage (%)
Fig.3 Typical Reverse Characteristics
TJ = 150°C
0
0.2
0.4
0.6
0.8
1
VF, Forward Voltage (V)
Fig.4 Typical Forward Characteristics
PAGE . 2
SVC4200V
MOUNTING PAD LAYOUT
TO-277
Unit：inch(mm)
0.038 0.046
(0.97) (1.18)
0.083
(2.10)
0.138
(3.50)
0.055
(1.40)
0.183
(4.65)
ORDER INFORMATION
• Packing information
T/R - 5K per 13" plastic Reel
September 04,2012-REV.00
PAGE . 3
SVC4200V
Part No_packing code_Version
SVC4200V_R2_00001
For example :
RB500V-40_R2_00001
Serial number
Version code means HF
Packing size code means 13"
Packing type means T/R
Part No.
Packing Code XX
Packing type
Tape and Ammunition Box
(T/B)
Tape and Reel
(T/R)
Bulk Packing
(B/P)
Tube Packing
(T/P)
Tape and Reel (Right Oriented)
(TRR)
Tape and Reel (Left Oriented)
(TRL)
FORMING
September 04,2012-REV.00
Version Code XXXXX
1st Code
Packing size code
A
N/A
0
HF
0
serial number
R
7"
1
RoHS
1
serial number
B
13"
2
T
26mm
X
S
52mm
Y
L
F
PANASERT T/B CATHODE UP
(PBCU)
PANASERT T/B CATHODE DOWN
(PBCD)
2nd Code HF or RoHS 1st Code 2nd~5th Code
U
D
PAGE . 4
SVC4200V
Disclaimer
z
Reproducing and modifying information of the document is prohibited without
permission from Panjit International Inc..
z
Panjit International Inc. reserves the rights to make changes of the content herein the
document anytime without notification. Please refer to our website for the latest
document.
z
Panjit International Inc. disclaims any and all liability arising out of the application or
use of any product including damages incidentally and consequentially occurred.
z
Panjit International Inc. does not assume any and all implied warranties, including
warranties of fitness for particular purpose, non-infringement and merchantability.
z
Applications shown on the herein document are examples of standard use and
operation. Customers are responsible in comprehending the suitable use in particular
applications. Panjit International Inc. makes no representation or warranty that such
applications will be suitable for the specified use without further testing or modification.
z
The products shown herein are not designed and authorized for equipments requiring
high level of reliability or relating to human life and for any applications concerning
life-saving or life-sustaining, such as medical instruments, transportation equipment,
aerospace machinery et cetera. Customers using or selling these products for use in
such applications do so at their own risk and agree to fully indemnify Panjit
International Inc. for any damages resulting from such improper use or sale.
z
Since Panjit uses lot number as the tracking base, please provide the lot number for
tracking when complaining.
September 04,2012-REV.00
PAGE . 5