SWS600/1000L Series Single Output Low Profile Power Supplies Features u Low Cost u Low Profile u Active Power Factor Correction u Universal Input (85 - 265VAC) u Input Transient Protected IEC61000-4 u Low Acoustical noise u Medical Certifications (SWS1000L) u Global safety Approvals u Variable speed fan Key Market Segments & Applications Specifications Model Input Voltage range Inrush Current (115 / 230VAC) Power Factor Input Current (100/200VAC) Temperature Coefficient Overcurrent Protection Overvoltage Protection Overtemperature Protection Hold Up Time (Typ) Leakage Current (max) Remote Sense Parallel Connection Remote On/Off (CNT) Voltage Programming (1) DC Good & Fan Fail Signal Auxiliary Output LED Indicator Operating Temperature Storage Temperature Humidity (non condensing) Cooling Withstand Voltage(One minute) A A V ms mA °C °C - Isolation Resistance Vibration (non operating) Shock (in packaging) Immunity Safety Agency Certification Conducted & Radiated EMI Weight (Typ) Size (WxHxD) Warranty g in yrs SWS600L SWS1000L 85 - 265VAC (47 - 63Hz) or 120 - 350VDC 20 / 40 Meets EN61000-3-2 Class A 7.1 / 3.6 (3.3V: 5 / 2.5) 12 / 6 <0.02%/°C >105%, Constant current style 125% -145% Yes, cycle AC or Remote On/Off to reset 20ms at 115/230VAC <0.75mA 100µA at 115VAC 60Hz(2) Yes Yes Yes Yes Yes, open collector output 12V 0.1A Green LED = On -40°C start up. -20 to 74°C, derating linearly to 50% load above 50°C -40 to +85°C 20 - 90% RH operating, 10 - 95%RH non operating Variable speed internal fan Input to Ground 2kVAC, Input to Output 3kVAC, Input to Ground 2kVAC, Input to Output 4kVAC, Output to Ground 500VAC, Output to CNT 100VAC Output to Ground 500VAC, Output to CNT 100VAC >50M at 25C & 70%RH, Output to Ground 500VDC MIL-STD-810F 514.5 Cat. 4,10 MIL-STD-810F 516.5 Procedure I, VI EN61000-4-2, -3, -4, -5, -6, -8, -11 UL, CSA, EN60950-1, UL60601-1 (1000W only), IEC61010-1 (600W only), EN50178, CE Mark EN55011 / EN55022-B, FCC Class B 1600 2300 2.4 x 4.72 x 7.48” 2.4 x 5.91 x 9.45” Three Years (1) 1-6V program voltage input to adjust output 20-120% (typical) of nominal. See instruction manual for details & models with this feature. (2) Worst case: <300µA at 264VAC, 63Hz (Normal Condition); <500µA (Single Fault Condition). 1-800-526-2324 • www.us.tdk-lambda.com/lp/ 99 Disclaimer: us.tdk-lambda.com/lp/legal.htm SWS600/1000L Series Model Selector Model SWS600L-3 SWS1000L-3 SWS600L-5 SWS1000L-5 SWS600L-12 SWS1000L-12 SWS600L-15 SWS1000L-15 SWS600L-24 SWS1000L-24 SWS600L-36 SWS1000L-36 SWS600L-48 SWS1000L-48 SWS600L-60 SWS1000L-60 Voltage 3.3V 3.3V 5V 5V 12V 12V 15V 15V 24V 24V 36V 36V 48V 48V 60V 60V Adjust Range 2.64 - 3.96V 2.64 - 3.96V 4 - 6V 4 - 6V 9.6 - 14.4V 9.6 - 14.4V 12 - 19.5V 12 - 19.5V 19.2 - 28.8V 19.2 - 28.8V 28.8 - 43.2V 28.8 - 43.2V 38.4 - 56V 38.4 - 56V 48 - 66V 48 - 66V Curr. (A) 120A 200A 120A 200A 53A 88A 43A 70A 27A (31A)4 44A (51A)4 18A 29A 13A (15A)4 22A (25A)4 10A 17A Max Pwr (W) 396W 660W 600W 1000W 636W 1056W 645W 1050W 648W(744W) 1056W(1224W) 648W 1044W 624W(720W) 1056W(1200W) 600W 1020W Max Reg (mV) 30 30 30 30 72 72 90 90 144 144 216 216 288 288 360 360 Load Reg (mV) 20 20 20 20 48 48 60 60 96 96 144 144 192 192 240 240 Line Noise (mV) 120 120 120 120 150 150 150 150 150 150 200 200 200 200 200 200 Ripple Eff.(3) (typ)% 70 / 72 74 / 76 75 / 77 79 / 81 79 / 82 82 / 84 79 / 82 82 / 84 81 / 84 84 / 86 82 / 84 84 / 86 82 / 84 84 / 86 82 / 84 84 / 86 Notes: (3) 115 / 230VAC (4) Peak current and power possible at 170-265VAC input, 10s max, 35% duty cycle SWS600L Outline Drawing Other Industrial Products SWS HWS ZWS DLP, DPP, DSP LS 50 - 300W Single Output 15 - 1800W Single output, high reliability 5 - 240W pcb style single, output 10 - 480W DIN Rail mount 25 - 200W Single output, low cost 1-800-526-2324 • www.us.tdk-lambda.com/lp/ For Additional Information, please visit us.tdk-lambda.com/lp/products/sws-series.htm 100 Revision B1: Apr 2012