COMPONENTS PRODUCT INFORMATION NEW Compact Coaxial Connectors Compatible with IEC60169-10 (Type SMB) Standard SMT Type SMB Connector CONNECTOR MB-0156-3 October 2010 SMT Type SMB Connector P/N No.: SMBR003D00 SMBR004D00 RoHS Compliant The SMB Series are compact coaxial SMB (IEC60169-10) type connectors with terminal area compatible with board surface mounting. These connectors are ideally suited for applications requiring miniaturization and high density such as wireless high-frequency devices, wireless communication devices, and measuring devices. Features •Compact coaxial connectors compatible with the IEC60169-10 (Type SMB) standard. •Compatible with reflow and automatic mounting with vacuum area tape. •Low profile, connector height 6.5mm from board. •Available with and without outer conductor SMT area bosses which prevent connector misalignment during reflow. (with boss type: SMBR003D00; without boss type: SMBR004D00) •Equivalent high frequency performance as conventional through-hole type connectors. •Design concept is based on high-accuracy simulation technology to optimize impedance matching, low reflection and low loss. Applications Mobile phones, PHS base stations, wireless LAN access points, wireless communication equipment, high frequency modules, wireless power amplifiers, measuring equipment, transmission characteristic measuring devices, RFID (IC tag, automatic identification), broadcasting equipment, etc. JAE PMK Div. Proprietary. Copyright © 2010, Japan Aviation Electronics Industry, Ltd. 1/3 MB-0156-3 General Specifications •Characteristic Impedance: 50 ohm •Operating Frequency: DC to 3GHz •V.S.W.R.: 1.2 max. •Rated Current: DC 2A •Rated Voltage: AC100V.r.m.s •Operating Temperature: -40 to+85 Deg. C •Contact Resistance: Initial, 8mΩ max. (Change after test, 12mΩ max.) •Dielectric Withstanding Voltage: AC 500 Vr.m.s (1 min.) •Insulation Resistance: 500MΩ min. (DC500V) Materials and Finishes Component Material / Finish Insulator SPS resin Signal Contact (Central Conductor) Phosphor bronze / Au plating over Ni Outer Conductor (Ground Contact) Brass / Au plating over Ni Ordering Information Receptacle (Board side) SMB R *** D Connector Series 00 Terminal Connection Type 00: Board connection type Connector configuration R: Straight receptacle Modification Code Characteristic Impedance D: 50Ω Technical Information Part Number SMB003D00 (with SMT area boss) SMB004D00 (without SMT area boss) SJ Drawing SJ105033 SJ107482 Product Specification JACS-2237-12 JAE PMK Div. Proprietary. Copyright © 2010, Japan Aviation Electronics Industry, Ltd. 2/3 MB-0156-3 Dimensions and Shapes ■ SMBR003D00（with SMT area boss） Applicable board pad dimensions JAE PMK Div. Proprietary. Copyright © 2010, Japan Aviation Electronics Industry, Ltd. 3/3 MB-0156-3 ■ SMBR004D00 (without SMT area boss) Applicable board pad dimensions Notice: Products shown in this leaflet are Japan Aviation Electronics Industry, Limited Product Marketing Division Aobadai Building, 3-1-19, Aobadai, Meguro-ku, Tokyo 153-8539 Phone: +81-3-3780-2787 FAX: +81-3-3780-2946 made for the applications listed below. However, if the above-mentioned products are to be used in aerospace devices, marine cable-connection devices, atomic power control systems, medical equipment for life-support systems, or any other specific application requiring extremely high reliability, please contact JAE for further information. Recommended applications: Computers, Office machines, Measuring devices, Telecommunication devices (Terminals, Mobile devices), AV devices, Household applications, FA devices, etc. * The specifications in this brochure are subject to change without notice. Please contact JAE for information. JAE PMK Div. Proprietary. Copyright © 2010, Japan Aviation Electronics Industry, Ltd. 4/3