35Amp Flag Pressfit 1.0mm LEAD Auto Rectifiers PFFR3501~3506 N/ P Data Sheet DESCRIPTION MECHANICAL DIMENSIONS FLAG PRESS-FIT DIMENSIONS IN INCHES (mm) NOTE: Features PFFR350XP Positive(Forward)(+) Cathode To Case,Color Code Red Low Cost Super Cool PFFR350XP Negative(Reverse)(-) Long life Features Anode To Case, Color Code Black High Current Capability Electrical Characteristics@25C Average Forward Current, Io at Tc=150C 60HZ, Resistive Or Inductive Load Symbol PFFR3501P PFFR3502P PFFR3504P PFFR3506P Unit PFFR3501N PFFR3502N PFFR3504N PFFR3506N IF 35 A(DC) Peak Reverse Voltage, Repetitive:VRRM VRRM 100 200 400 600 DC Reverse Voltage, VR V(DC) 100 200 400 600 Maximum RMS Voltage VRMS 70 140 280 420 Max. Inst Forward Voltage Drop. VF at 80Amp V(DC) VF 1.15 V IFSM 400 A IR 10 uA IR 500 uA R0JA 1.2 C/W -65 to +175 C Peak Forward Surge Current, IFM(surge): 8.3ms. Single Half Sine-Wave Superimposed On Rated Load (JEDEC method) Maximum Reverse Current IR At Rated DC Reverse Voltage. TC= 25C Maximum Reverse Current IR At Rated DC Reverse Voltage. TC=100C Maximum Thermal Resistance, Junction To Case (single side cooled) Operating And Storage Temperature Range Tj; Tstrg Junction Capacitance (pF) Typical Junction Capacitance 1000 500 200 100 50 10 .1 100 10 1 Reverse Voltage (V) °° TJ = 25°°C F = 1 MHz VSIG = 50 Vpp Forward Current Derating Curve Average Forward Current (A) Non-Repetitive Peak Forward Surge Current 1000 °° TJ = 25°°C 500 200 100 °° TJ = 150°°C Amps 50 10 .1 1 10 Number of Cycles @ 60 Hz 100 Single Phase ½ Wave Res. or Ind. Load 50 40 10 30 20 10 5 20 Capacitive Load IPK/AV = 5, 10 & 20 0 25 5 0 7 5 100 125 150 175 °° Lead Temperature (°°C) Typical Instantaneous Forward Characteristics 1000 °° TJ = 100°°C .1 .01 .001 60 Forward Current (A) µµ Reverse Current (µ µA) Typical Reverse Characteristics 10 1 PFFR3501~3506P/N 35Amp Flag Pressfit 1.0mm LEAD Auto Rectifiers Data Sheet °° TJ = 25°°C 40 80 120 Percent of Rated Peak Voltage 100 Ratings at 25 Deg. C ambient temperature unless otherwise specified. 10 1 .1 NOTES: 1. Measured @ 1 MHz and applied reverse voltage of 4.0V. 2. Thermal Resistance Junction to Ambient, Jedec Method. 3. When Mounted to heat sink, from body. °° PW = 300 µs µµ TJ = 150°°C Forward Voltage (V) .6 .9 1.1 1.4 1.7 2.0 2.3 2.6 Single Phase Half Wave, 60 Hz Resistive or Inductive Load. For Capacitive Load, Derate Current by 20%.