MA-COM MADRCC0004TR

MADRCC0004
Quad Driver for GaAs FET Switches and Attenuators
Rev. V3
Features
•
•
•
•
•
•
•
•
•
•
•
High Speed CMOS Technology
Complementary Outputs
Positive Voltage Control
Low Power Dissipation
Plastic SOIC Package for SMT Applications
Tape and Reel Packaging Available
Lead-Free SOIC-16 Package
100% Matte Tin Plating over Copper
Halogen-Free “Green” Mold Compound
260°C Reflow Compatible
RoHS* Compliant Version of DR65-0001
Logic Diagram
Ax
Cx
Bx
Description
M/A-COM's MADRCC0004 is a Quad channel
driver used to translate TTL control inputs into gate
voltages for GaAs FET microwave switches and
attenuators. High speed analog CMOS technology is
utilized to achieve low power dissipation at moderate
to high speeds, encompassing most microwave
switching applications.
Pin Configuration
Pin No.
Function
Pin No.
Function
1
A3
9
C2
2
B3
10
C1
3
A4
11
GND
Ordering Information
Part Number
Package
4
B4
12
GND
MADRCC0004
Bulk Packaging
5
VEE
13
A1
MADRCC0004TR
1000 piece reel
6
VCC
14
B1
7
C4
15
A2
8
C3
16
B2
Note: Reference Application Note M513 for reel size
information.
Guaranteed Operating Ranges
Symbol
Parameter1
Unit
Min
Typical
Max
VCC
Positive DC Supply Voltage
V
4.5
5.0
5.5
VEE
Negative DC Supply Voltage
V
-5.5
-5.0
-4.5
TA
Operating Ambient Temperature
°C
-40
+25
+85
IOH
DC Output Current - HIGH
mA
—
—
-1.0
IOL
DC Output Current - LOW
mA
—
—
1.0
Trise, Tfall
Maximum Input Rise or Fall Time
nS
—
—
500
1. All voltages are relative to GND.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MADRCC0004
Quad Driver for GaAs FET Switches and Attenuators
Rev. V3
AC & DC Characteristics Over Guaranteed Operating Range
Symbol
Parameter
Test Conditions
Units
Min
Typ
Max
VIH
Input HIGH Voltage
Guaranteed HIGH Input Voltage
V
2.0
—
-
VIL
Input LOW Voltage
Guaranteed LOW Input Voltage
V
-
—
0.8
VOH
Output HIGH Voltage
IOH = -1 mA
VEE = Max
V
- 0.1
—
-
VOL
Output LOW Voltage
IOL = 1 mA
VEE = Max
V
—
—
VEE + 0.1
IIN
Input Current
VIN = VCC or GND
VEE = Min
µA
-10
0
10
ICC
Quiescent Supply Current
VCC = Max
VEE = Min
VIN = VCC or GND
µA
—
—
400
ΔICC
Additional Supply Current, per TTL
Input pin
VCC = Max
VIN = VCC - 2.1V
mA
—
—
1.0
TPHL, TPLH
Propagation Delay
Guaranteed -40° C to + 85° C
nS
—
—
50
TTHL, TTLH
Output Transition Time
Guaranteed -40° C to + 85° C
nS
—
—
25
Delay Skew, Output A to Output B
Guaranteed -40° C to + 85° C
nS
—
—
8
Switching Waveforms
INPUT
C
VIN
TF
Absolute Maximum Ratings2,3
TR
Parameter
Absolute Maximum
VCC
- .5V to + 6.0 V
VEE
- 6.0 V to - .5 V
VCC - VEE
12 V
LOGIC 1
90%
1.3 V
10%
LOGIC 0
TPLH
TPHL
OUTPUT A
V IN
GND
90%
4
VCC + .5 V
V OUT
VEE - .5 V
Storage Temperature
-65°C to +150°C
Operating Temperature
-40°C to +85°C
VOUT
50%
OUTPUT B
10%
TTLH
TTHL
VEE
Note: See Switching Wave Forms for the definition of the
switching terms. Supplies must be by-passed with .01 µF
Capacitors.
Note: Unused inputs must be tied to Ground
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
Silicon Integrated Circuits are sensitive to
electrostatic discharge (ESD) and can be damaged
by static electricity. Proper ESD control techniques
should be used when handling these devices.
2.
3.
4.
Exceeding any one or combination of these limits may cause
permanent damage to this device.
M/A-COM does not recommend sustained operation near
these survivability limits.
Standard CMOS TTL interface, latch-up will occur if logic
signal is applied prior to power supply.
Truth Table
Input
Outputs
CX
AX
BX
0
VEE
GND
1
GND
VEE
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MADRCC0004
Quad Driver for GaAs FET Switches and Attenuators
Rev. V3
Lead-Free, SOIC-16†
†
Reference Application Note M538 for lead-free solder reflow
recommendations.
3
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.