New Product MSP5.0A Vishay General Semiconductor Surface Mount TRANSZORB® Transient Voltage Suppressors FEATURES • Very low profile - typical height of 0.65 mm eSMP TM Series • Ideal for automated placement • Oxide planar chip junction • Uni-directional polarity only • Peak pulse power: 100 W (10/1000 µs) • ESD capability: 15 kV (air), 8 kV (contact) Top View Bottom View • Meets MSL level 1, per J-STD-020C, LF maximum peak of 260 °C MicroSMP • Solder dip 265 °C max. 10 s, per JESD 22-A111 • AEC-Q101 qualified • Compliant to RoHS directive 2002/95/EC and in accordance to WEEE 2002/96/EC PRIMARY CHARACTERISTICS VWM 5.0 V PPPM 100 W IFSM 25 A TJ max. 150 °C • Halogen-free according to IEC 61249-2-21 definition • Find out more about Vishay’s Automotive Grade Product requirements at: www.vishay.com/applications MECHANICAL DATA Case: MicroSMP Molding compound meets UL 94 V-0 flammability rating Base P/N-M3 - halogen-free and RoHS compliant, commercial grade Base P/NHM3 - halogen-free and RoHS compliant, automotive grade Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 M3 suffix meets JESD 201 class 1A whisker test, HM3 suffix meets JESD 201 class 2 whisker test Polarity: Color band denotes the cathode end TYPICAL APPLICATIONS Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units specifically for protecting 5.0 V supplied sensitive equipment against transient overvoltages. MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Peak pulse power dissipation SYMBOL (1)(2) Peak pulse current with a 10/1000 µs waveform (fig. 1) Non repetitive peak forward surge current 10 ms single half sine-wave Power dissipation TL = 120 °C (2) Operating junction and storage temperature range (2) VALUE UNIT PPPM 100 W IPPM 10.9 A IFSM 25 A PD 1.0 W TJ, TSTG - 55 to + 150 °C Notes (1) Non-repetitive current pulse, per fig. 1 (2) Mounted on 6.0 mm x 6.0 mm copper pads to each terminal Document Number: 88487 Revision: 16-Jun-09 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 1 New Product MSP5.0A Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) BREAKDOWN VOLTAGE VBR AT IT (1) (V) DEVICE MARKING CODE DEVICE TYPE MSP5.0A AE MIN. MAX. 6.40 7.07 TEST CURRENT IT (mA) STAND-OFF VOLTAGE VWM (V) MAXIMUM REVERSE LEAKAGE AT VWM ID (µA) 10 5.0 100 MAXIMUM CLAMPING VOLTAGE (2) VC (V) AT IPPM (A) 8/20 µs MAXIMUM CLAMPING VOLTAGE (2) VC (V) AT IPPM (A) 10/1000 µs 9.2 10.9 14.5 57 Notes (1) Pulse test: tp ≤ 50 ms (2) Surge current waveform per Fig. 1 and derate per Fig. 2 THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Typical thermal resistance (1) SYMBOL VALUE UNIT RθJA RθJL 125 30 °C/W Note Thermal resistance from junction to ambient and junction to lead mounted on P.C.B. with 6.0 mm x 6.0 mm copper pad areas. RθJL is measured (1) at the terminal of cathode band. IMMUNITY TO STATIC ELECTRICAL DISCHARGE TO THE FOLLOWING STANDARDS (TA = 25 °C unless otherwise noted) STANDARD TEST TYPE AEC-Q101-001 IEC-61000-4-2 (2) TEST CONDITIONS Human body model (contact mode) SYMBOL C = 100 pF, R = 1.5 kΩ Human body model (air discharge mode) (1) C = 150 pF, R = 150 Ω VC CLASS VALUE H3B > 8 kV 4 > 15 kV Notes (1) Immunity to IEC-61000-4-2 air discharge mode has a typical performance > 30 kV (2) System ESD standard ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE MSP5.0A-E3/89A 0.006 89A 4500 7" diameter plastic tape and reel MSP5.0AHE3/89A (1) 0.006 89A 4500 7" diameter plastic tape and reel MSP5.0A-M3/89A 0.006 89A 4500 7" diameter plastic tape and reel MSP5.0AHM3/89A (1) 0.006 89A 4500 7" diameter plastic tape and reel Note Automotive grade (1) www.vishay.com 2 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 88487 Revision: 16-Jun-09 New Product MSP5.0A Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 100 TJ = 25 °C Pulse Width (td) is defined as the Point where the Peak Current decays to 50 % of IPPM tr = 10 µs tr = 8 µs Peak Value IPPM 100 Peak Forward Current (A) IPPM - Peak Pulse Current, % IRSM 150 Half Value - IPP IPPM 2 50 td = 1000 µs td = 20 µs 0 1.0 2.0 3.0 1 TJ = 25 °C 0.1 0.4 4.0 0.6 0.8 1.0 1.2 1.4 1.6 t - Time (ms) VF - Forward Voltage Drop (V) Figure 1. Pulse Waveform Figure 4. Typical Peak Forward Voltage Drop vs. Peak Forward Current 100 800 CJ - Junction Capacitance (pF) PPPM - Peak Pulse Power (kW) TJ = 150 °C td 0 10 1 0.1 0.01 0.1 700 600 500 400 300 200 1 10 100 1000 0 10 000 1 2 3 4 td - Pulse Width (µs) Reverse Voltage (V) Figure 2. Peak Pulse Power Rating Curve Figure 5. Typical Junction Capacitance 40 1000 Transient Thermal Impedance (°C/W) Reverse Leakage Current (µA) 10 30 20 10 0 25 50 75 100 125 150 100 10 1 0.01 0.1 1 10 100 1000 TJ - Junction Temperature (°C) t - Pulse Duration (s) Figure 3. Relative Variation of Leakage Current vs. Junction Temperature Figure 6. Typical Transient Thermal Impedance Document Number: 88487 Revision: 16-Jun-09 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 3 New Product MSP5.0A Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) MicroSMP 0.059 (1.50) 0.043 (1.10) Cathode Band 0.055 (1.40) 0.047 (1.20) 0.030 (0.75) 0.022 (0.55) 0.039 (0.98) 0.031 (0.78) 0.091 (2.30) 0.083 (2.10) 0.106 (2.70) 0.091 (2.30) 0.030 (0.75) 0.022 (0.55) Mounting Pad Layout 0.079 (2.00) 0.029 (0.73) 0.025 (0.63) 0.043 (1.10) 0.011 (0.27) 0.005 (0.12) www.vishay.com 4 0.032 (0.80) 0.032 (0.80) 0.020 (0.50) For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 88487 Revision: 16-Jun-09 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1