PRG Series • High current SSR rated to 150A @ 48-660 VAC • SCR output for heavy industrial loads • AC or DC control • Zero-crossing (resistive loads) or random-fire (inductive loads) output PRODUCT SELECTION Control Voltage 3-15 VDC 90-140 VAC 4-15 VDC 150A PRGD24150 PRGA24150 150A 150A PRGA48150 PRGD48150 PRGA60150 PRGD60150 AVAILABLE OPTIONS OUTPUT SPECIFICATIONS (1) Description Operating Voltage (47-63Hz) [Vrms] Transient Overvoltage [Vpk] Maximum Off-State Leakage Current @ Rated Voltage [mArms] Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (2) Maximum Load Current (3) [Arms] Minimum Load Current [Arms] Maximum Surge Current (16.6ms) [Apk] Maximum On-State Voltage Drop @ Rated Current [Vpk] Thermal Resistance Junction to Case (Rjc) [°C/W] Maximum I2 t for Fusing (8.3 msec) [A2 sec] Minimum Power Factor (with Maximum Load) 24-280 600 5.0 500 150 0.15 1750 1.7 0.15 12700 48-530 1200 5.0 500 150 0.15 1750 1.7 0.15 12700 48-660 1200 1.0 500 150 0.15 1750 1.7 0.15 12700 0.5 0.5 0.5 INPUT SPECIFICATIONS (1) Description Control Voltage Range Maximum Turn-On Voltage Minimum Turn-Off Voltage Typical Input Current Nominal Input Impedance Maximum Turn-On Time [msec] (4) Maximum Turn-Off Time [msec] 240 V Models 480 V Models 3-15 VDC 3.0 VDC 1.0 VDC 15 mA @5 VDC 300 Ohm 1/2 Cycle 1/2 Cycle 4-15 VDC 4.0 VDC 1.0 VDC 15 mA @ 5 VDC 300 Ohm 1/2 Cycle 1/2 Cycle 90-140 Vrms 90 Vrms 10 Vrms 10 mA @ 120 VAC 14.1 K Ohm 10 40 GENERAL SPECIFICATIONS Description Dielectric Strength, Input/Output/Base (50/60Hz) Minimum Insulation Resistance (@ 500 V DC) Maximum Capacitance, Input/Output Ambient Operating Temperature Range Ambient Storage Temperature Range Weight (typical) Encapsulation Power Terminals: Control Terminals: GENERAL NOTES 1) All parameters at 25°C unless otherwise specified. 2) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 3) Heat sink ing required, for derating curves see page 2. 4) Turn-on time for Random turn-on versions is 0.02 msec (DC Control Models) Parameters 4000 Vrms 109 Ohm 10 pF -30 to 80 °C -40 to 125 °C 12 oz (340g) Thermally conductive Epoxy MS Screws Furnished, Mounted .050 x .020 Square Pins MECHANICAL SPECIFICATIONS THERMAL DERATE INFORMATION AGENCY APPROVALS Rev. 121710 ANNEX - ENVIROMENTAL INFORMATION