RoHS Compliant GaAs SP3T 2.5 V Switch DC - 3.0 GHz MASW-008330 V1 Features • • • • • • • • Functional Schematic Low Voltage Operation: 2.5V Low Insertion Loss: 0.3 dB at 1 GHz 0.5 micron GaAs PHEMT Process Lead-Free 2 mm 8-Lead PDFN Package 100% Matte Tin Plating over Copper Halogen-Free “Green” Mold Compound 260°C Reflow Compatible RoHS* Compliant version of MASWSS0028 Description M/A-COM’s MASW-008330 is a GaAs PHEMT MMIC single pole three throw (SP3T) switch in a lead-free 2 mm 8-lead PDFN package. The MASW008330 is ideally suited for applications where low control voltage, low insertion loss, high isolation, small size and low cost are required. Pin Configuration Pin No. Function Description 1 RFC RF In/Out 2 GND RF Ground 3 V1 Control 1 4 RF1 RF In/Out 5 RF2 RF In/Out 6 V2 Control 2 7 V3 Control 3 8 RF3 RF In/Out Typical applications are for filter and antenna switching in handset systems that connect separate receive functions to a common antenna, as well as other related handset and general purpose applications. This part can be used in all systems operating up to 3 GHz requiring low control voltage. The MASW-008330 is fabricated using a 0.5 micron gate length GaAs PHEMT process. The process features full passivation for performance and reliability. Absolute Maximum Ratings 3,4 Ordering Information1 Part Number Package MASW-008330-TR3000 3000 piece reel MASW-008330-000SMB Sample Test Board (Includes 5 samples) Parameter Absolute Maximum Max Input Power (0.5 - 3 GHz, 2.5V Control) +32 dBm Voltage ±8.5 volts Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C 1. Reference Application Note M513 for reel size information. Truth Table 2 V1 V2 V3 RFC RF1 RFC RF2 RFC RF3 0 1 0 On Off Off 1 0 0 Off On Off 0 0 1 Off Off On 3. Exceeding any one or combination of these limits may cause permanent damage to this device. 4. M/A-COM does not recommend sustained operation near these survivability limits. 2. 0 = 0 V ± 0.2 V, 1 = +2.5 V to +5 V. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant GaAs SP3T 2.5 V Switch DC - 3.0 GHz MASW-008330 V1 Electrical Specifications: TA = 25°C, VC = 0 V / 2.5 V, Z0 = 50 Ω 5 Parameter Test Conditions Units Min. Typ. Max. Insertion Loss 6 DC - 1 GHz 1 - 2 GHz 2 - 3 GHz dB dB dB — — — 0.3 0.5 0.75 0.4 0.6 1.0 Isolation DC - 1 GHz 1 - 2 GHz 2 - 3 GHz dB dB dB 19 13 10 24 18 14 — — — Return Loss DC - 2.5 GHz 2.5 - 3 GHz dB dB — — 25 20 — — IP3 Two Tone, +0 dBm/tone, 1 MHz Spacing, > 50 MHz dBm — 50 — P1dB — dBm — 21 — Trise, Tfall 10% to 90% RF, 90% to 10% RF nS — 13 — Ton, Toff 50% control to 90% RF and 50% control to 10% RF nS — 15 — Transients In Band mV — 30 — Control Current |VC| = 2.5V µA — 1 10 5. External DC blocking capacitors are required on all RF ports. 6. Insertion loss can be optimized by varying the DC blocking capacitor value, e.g. 100 pF for 100 - 500 MHz, 39 pF for 0.5 - 3 GHz. Lead Free 2 mm 8-lead PDFN † † Reference Application Note M538 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. 2 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant GaAs SP3T 2.5 V Switch DC - 3.0 GHz MASW-008330 V1 Typical Performance Curves vs. Frequency and Temperature Isolation Insertion Loss 30 1.0 25 0.8 Insertion Loss +25C Insertion Loss +85C Insertion Loss -40C 20 0.6 15 0.4 10 5 0 0.5 Isolation +85C Isolation +25C Isolation -40C 1.0 1.5 0.2 2.0 2.5 3.0 0.0 0.5 1.0 Frequency (GHz) 1.5 2.0 2.5 3.0 Frequency (GHz) Qualification Return Loss Qualified to M/A-COM specification REL-201, Process Flow –2. 45 Return Loss +85C Return Loss +25C Return Loss -40C 40 Handling Procedures 35 30 Please observe the following precautions to avoid damage: 25 Static Sensitivity 20 15 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 3 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information.