COILCRAFT LPS6235

Document 587-1
Shielded Power Inductors – LPS6235
• Low DCR; high current; shielded construction
• Perfect for backlight applications
Designer’s Kit C345 contains 3 each of all values
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Terminations RoHS compliant silver-palladium-platinum-glass frit.
Other terminations available at additional cost.
Weight 460 – 480 mg
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 350/7″reel; 1500/13″ reel Plastic tape: 16 mm wide,
0.3 mm thick, 8 mm pocket spacing, 3.68 mm pocket depth
Recommended pick and place nozzle OD: 6.2 mm; ID: ≤ 3.1 mm
PCB washing Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
Isat (A)5 Irms (A)6
DCR SRF
2
3
4
Inductance max typ 10% 20% 30% 20°C40°C
Part number1 ±20% (µH) (Ohms) (MHz) drop drop drop rise rise
LPS6235-682ML_ 6.8 0.075
552.62.72.81.30
1.90
LPS6235-822ML_ 8.2 0.095
482.52.62.71.30
1.85
LPS6235-103ML_ 10.0 0.100
372.32.42.51.28
1.80
LPS6235-123ML_ 12.0 0.110
291.92.22.31.25
1.75
LPS6235-153ML_ 15.0 0.125
251.92.02.01.22
1.70
LPS6235-183ML_ 18.0 0.140
241.71.81.91.20
1.65
LPS6235-223ML_ 22.0 0.145
241.61.71.71.10
1.60
LPS6235-333ML_ 33.0 0.180
161.31.41.51.00
1.30
LPS6235-473ML_ 47.0 0.245
131.11.21.20.80
1.15
LPS6235-563ML_ 56.0 0.280
121.01.01.10.75
1.07
LPS6235-683ML_ 68.0 0.34510.80.900.940.960.731.00
LPS6235-823ML_ 82.0 0.31510.00.460.520.550.720.95
LPS6235-104ML_ 100.0 0.375 9.00.460.520.540.700.90
LPS6235-124ML_ 120.0 0.435 8.30.440.480.510.600.80
LPS6235-154ML_ 150.0 0.535 7.30.370.430.450.530.73
LPS6235-224ML_ 220.0 0.820 5.60.310.360.370.450.64
LPS6235-334ML_ 330.0 1.20 4.40.260.290.300.400.50
LPS6235-474ML_ 470.0 1.60 3.60.220.250.260.320.43
LPS6235-564ML_ 560.0 2.00 3.10.200.220.230.290.38
LPS6235-684ML_ 680.0 2.20 2.80.170.190.210.280.37
LPS6235-824ML_ 820.0 2.70 2.50.160.180.190.260.33
LPS6235-105ML_1000.0 3.40 2.20.140.170.180.240.30
LPS6235-155ML_1500.0 4.60 1.90.120.130.140.190.26
LPS6235-185ML_1800.0 5.42 1.70.110.120.130.180.23
LPS6235-225ML_2200.0 6.70 1.50.090
0.110.110.160.22
LPS6235-335ML_ 3300.0
9.50
1.1 0.0800.0900.10 0.14 0.180
LPS6235-475ML_ 4700.0 14.5
0.940.0700.0770.0840.11 0.150
LPS6235-565ML_ 5600.0 16.4
0.860.0600.0700.0800.10 0.130
LPS6235-685ML_ 6800.0 21.4
0.800.0570.0650.0690.0900.120
LPS6235-825ML_ 8200.0 24.5
0.700.0520.0600.0670.0850.115
LPS6235-106ML_10000.0 29.5
0.610.0500.0550.0600.0750.095
1. Please specify termination and packaging codes:
LPS6235-106MLC
Termination:L= RoHS compliant silver-palladiumplatinum-glass frit.
Special order:
T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Packaging:C
=7″ machine-ready reel. EIA-481
embossed plastic tape (350 parts
per full reel).
B=Less than full reel. In tape, but not
machine ready. To have a leader and
trailer added ($25 charge), use code
letter C instead.
D
=13″ machine-ready reel. EIA-481
embossed plastic tape. Factory
order only, not stocked (1500 parts
per full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc using an
Agilent/HP 4192A.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 8753ES or equivalent.
5. DC current that causes the specified inductance drop
from its value without current.
6. Current that causes the specified temperature rise from
25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components”
before soldering.
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 587-1 Revised 12/01/11
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Document 587-2
Shielded SMT Power Inductors – LPS6235 Series
Typical L vs Current
Typical L vs Frequency
10000
10000
3300 µH
1000 µH
330 µH
100 µH
100
33 µH
10 µH
10
1
0.01
1000 µH
1000
Inductance (µH)
1000
Inductance (µH)
3300 µH
0.1
330 µH
100 µH
100
33 µH
10 µH
10
Current (A)
1
10
Typical Current Derating
1
0.01
1
0.1
10
Frequency (MHz)
0.236 ±0.003*
6,00 ±0,076
100
XXX X
90
80
70
Dash
number
60
0.236 ±0.003*
6,00 ±0,076
Winding
direction
Internal
code
50
40
30
20
10
0
Isat
Irms
-40
-20
0
0.138
max**
3,50
25°C
Percent of rated current
120
110
20
Recommended
Land Pattern
40
60
80
100
120 140
0.079
2,00
0.165
4,20
Ambient temperature (°C)
0.039 typ
1,00
0.260 0.167
6,60 4,25
0.039 typ
1,00
are of the case not
* Dimensions
including the termination. For maximum
overall dimensions including the
termination, add 0.005 in / 0,13 mm.
0.165
4,20
0.071
1,80
0.079
2,00
0.167
4,25
0.260
6,60
**For optional tin-lead and tin-silver-copper
terminations, dimensions are for the
mounted part. Dimensions before mounting
can be an additional 0.005 inch (0,13 mm).
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Dimensions are in
inches
mm
Document 587-2 Revised 12/01/11
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.