CSFD25 Low Cost Frequency Doubler Rev. V2 Product Image Features • • • • INPUT: 10 TO 2400 MHz OUTPUT: 20 TO 4800 MHz INPUT DRIVE LEVEL +10 dBm (NOMINAL) SURFACE MOUNT Description The CSFD25 is a passive bridge diode frequency doubler, designed for use in the high volume wireless and test equipment applications. The design utilizes Schottky bridge quad diodes and broadband baluns to attain excellent performance. Due to the use of high temperature solder and welded assembly processes used internally makes it ideal for use in semi-automated and automated assembly. Environmental screening available to MIL-STD-883, MIL-STD-202 or MIL-DTL-28837, consult factory. Ordering Information Part Number Package CSFD25 Surface Mount Electrical Specifications: Z0 = 50Ω Pin= +10 dBm Typical Parameter Test Conditions Guaranteed Units +25ºC -40º to +85ºC SSB Conversion Loss (max) fin = 10 to 2400 MHz dB 11.5 13.0 13.5 Suppression Fundamental (min) fin = 10 to 1000 MHz fin = 1000 to 2000 MHz fin =2000 to 2400 MHz dBc dBc dBc 35 25 20 25 20 16 23 18 14 Third Harmonic Suppression (min) fin = 10 to 500 MHz fin = 500 to 1000 MHz fin = 1000 to 2400 MHz dBc dBc dBc 50 40 35 40 30 25 38 28 23 Input VSWR fin = 10 to 2400 MHz 2.0:1 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. CSFD25 Low Cost Frequency Doubler Rev. V2 Typical Performance Curves 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. CSFD25 Low Cost Frequency Doubler Rev. V2 Outline Drawing: Surface Mount * Absolute Maximum Ratings Parameter Absolute Maximum Operating Temperature -54ºC to +85ºC Storage Temperature -65ºC to +100ºC Peak Input Power +23 dBm max @ +25ºC +20 dBm max @ +100ºC Weight: 2 grams (0.07 oz.) max ∗ Dimensions are inches (millimeters) ±0.015 (0.38) unless otherwise specified. 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.