S36SE series 17W Single output DC/DC Converter FEATURES Efficiency up to 87% Package with Industry Standard Pinout Package Dimension: 29.4 x25.6 x10.2mm (1.16” x1.01” x0.40”) Isolation Voltage 1500VDC Operating Temperature range - 40°C to +85°C Six-sided shield metal case Lead free, RoHs Compliant Over current protection Short Output Protection 3 Years Product Warranty The S36SE series are miniature, isolated 17W DC/DC converters with 1500VDC isolation. The S36SE family comes with a host of industry-standard features, such as over current protection, over voltage protection, and remote on/off. All models have an untra-wide 4:1 input voltage range (18V to 75V). With operating temperature of -40°C to +85°C, it is suitable for customers’ critical applications, such as process control and automation, transportation, data communication and telecom equipment, test equipment, medical device and everywhere where space on the PCB is critical. Model List Model Number S36SE3R305 S36SE05003 S36SE12001 Input Voltage (Range) Output Voltage VDC 36 (18 ~ 75) Output Current Input Current Load Maxcapacitive Regulation Load @Max. Load @No Load Efficiency (typ.) Max. Min. @Max. Load VDC mA mA mA(typ.) mA(typ.) mV uF % 3.3 5 12 5000 3000 1300 0 0 0 1300 1100 1100 20 15 15 10 10 10 1000 1000 500 86.5 83.5 87 Input Characteristics Item Input Surge Voltage (100 msec) Input Turn-On Voltage Threshold Input Turn-Off Voltage Threshold Input Under-Voltage Lockout Hysteresis Off-Converter Input Current Reverse Polarity Input Current Input Filter Internal Power Dissipation DS_S36SE_07202012 Model All Models All Models All Models All Models All Models All Models All Models 3.3V 5V 12V Min. Typ. 16 15 0.5 17 16 1 5 --0.3 Internal PI Filter 3.6 3.6 3.0 --- Max. 100 18 17 1.5 Unit VDC VDC VDC VDC mA A W W W E-mail: [email protected] http://www.delta.com.tw/dcdc P1 Output Characteristics Item Output Voltage Accuracy Output Voltage Balance Line Regulation Load Regulation Ripple & Noise (20MHz) Ripple & Noise (20MHz) Ripple & Noise (20MHz) Total Outupt Voltage Range Output DC Current-Limit Range Short Output Protection Output Over-Voltage Protection Conditions Dual Output, Balanced Loads Vin=18V to 75V Io=0% to 100% 3.3V, 1uF ceramic, 10uF tantalum 5V, 1uF ceramic, 10uF tantalum 12V, 1uF ceramic, 10uF tantalum Over load, line and temperature Output Voltage 10% Low Continuous, Auto-recovery Min. ------- Typ. ±1.0 ----- --------110 50 50 50 --- 115 Max. ±2.0 --10 10 ------±3 150 Unit %Vo %Vo mV mV mV P-P mV P-P mV P-P %Vo %Iomax 150 %Vo General Characteristics Min. Typ. Max. Unit I/O Isolation Voltage (rated) Item Conditions --- --- 1500 VDC I/O Isolation Resistance 10 --- --- MΩ I/O Isolation Capacitance --- 1000 pF 450 KHz Switching Frequency MTBF (calculated) Io=80%Iomax, Ta=25℃,300LFM ----- 5M ----- Hours Recommend External Input Fuse All Models 2000mA Slow-Blow Type Environmental Specifications Parameter Conditions Min. Max. Unit Ambient -40 +85 ℃ Case Temperature --- +105 ℃ Storage Temperature Range -50 +125 ℃ Humidity (non condensing) --- 95 % rel. H 260 ℃ Operating Temperature Range (with Derating) Cooling Free-Air convection Lead Temperature (1.5mm from case for 10Sec.) --- Power Derating Curve 110% Output Power(%) S36SE3R305 (Encapsulation) Output Power vs. Ambient Temperature at Natural Convection 100% 90% 80% 70% 60% Natural Convection 50% 40% 30% 20% 10% 0% -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 Ambient Temperature (℃) Notes 1 2 3 4 Specifications typical at Ta=+25℃, resistive load, nominal input voltage and rated output current unless otherwise noted. Ripple & Noise measurement bandwidth is 0-20MHz. All DC/DC converters should be externally fused at the front end for protection. Specifications are subject to change without notice. DS_S36SE_07202012 E-mail: [email protected] http://www.delta.com.tw/dcdc P2 Mechanical Drawing Mechanical Dimensions Pin Connections Pin Function 1 +Vin 2 -Vin 3 on/off 4 -Vout 5 Trim 6 +Vout ¾ All dimensions in mm (inches) ¾ Tolerance: X.X±0.5 (X.XX±0.02) ¾ Pins Diameter : ±0.10(±0.004) X.XX±0.25 ( X.XXX±0.010) Physical Outline Case Size Case Material : : 29.4x25.6x10.2mm (1.16x1.01x0.40 Inches) Al alloy; finish: anodize black Baseplate material No conductive FR-4 Pin material Copper with matte Tin plating and Nickel under plating Weight : 18.0grams Part Numbering System S 36 S E 3R3 05 N R Form factor Input voltage Number of output Product series Output voltage Output current On/off logic Pin length S- 36 18~75V S - single E- 3R3 - 3.3V 05 - 5A Nnegative 050 - 5V 03 - 3A P - Positive 120 - 12V 01 – 1A K - 0.110” F G Option Code F - RoHS 6/6 N - 0.146” (Lead Free) R - 0.171” Space RoHS5/6 G - with metal case D - 0.24” S - 0.189” WARRANTY Delta offers a three (3) years limited warranty.Complete warranty information is listed on our web site or is available upon request from Delta. Information furnished by Delta is believed to be accurate and reliable. However, no responsibility is assumed by Delta for its use, nor for any infringements of patents or other rights of third parties, which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Delta. Delta reserves the right to revise these specifications at any time, without notice. DS_S36SE_07202012 E-mail: [email protected] http://www.delta.com.tw/dcdc P3