NL17SV00 Single 2-Input NAND Gate The NL17SV00 is an ultra−high performance 2−Input NAND gate manufactured in 0.35 mm technology, with excellent performance down to 0.9 V. This device is ideal for extremely high speed and high−drive applications. Additionally, limitations of board space are no longer a constraint. The very small SOT−553 makes this device fit most tight designs and spaces. http://onsemi.com Features • • • • • • • Extremely High Speed: 1.0 ns (Typ) @ VCC = 3.3 V Designed for 0.9 to 3.3 V Operation Overvoltage Tolerance (OVT)* Input Pins Permits Logic Translation Balanced ±24 mA Output Drive @ VCC 3.3 V Near Zero Static Supply Current Ultra−Tiny SOT−553 5−Pin Package, only 1.6 x 1.6 x 0.6 mm These Devices are Pb−Free and are RoHS Compliant Typical Applications • • • • Cellular Digital Camera PDA Digital Video MARKING DIAGRAM 5 1 UH M G G SOT−553 CASE 463B UH = Specific Device Code M = Date Code G = Pb−Free Package (Note: Microdot may be in either location) PIN DIAGRAM IN B 1 IN A 2 GND 3 5 VCC 4 OUT Y Industry Leadership • Functionally Similar to NC7SV00 and SN74AUC1G00 IN A & IN B OUT Y PIN ASSIGNMENT Figure 1. Logic Symbol PIN # 1 IN B 2 IN A Output 3 GND FUNCTION TABLE Inputs FUNCTION A B Y 4 OUT Y L L H 5 VCC L H H H L H H H L ORDERING INFORMATION Device Package Shipping† NL17SV00XV5T2G SOT−553 4000 Tape & Reel (Pb−Free) (178 mm) †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. *Overvoltage Tolerance (OVT) enables input pins to function outside (higher) of their operating voltages, with no damage to the devices or to signal integrity. © Semiconductor Components Industries, LLC, 2011 July, 2011 − Rev. 4 1 Publication Order Number: NL17SV00XV5T2/D NL17SV00 MAXIMUM RATINGS Symbol VCC Rating DC Supply Voltage Value Units −0.5 to +4.6 V −0.5 to +4.6 V −0.5 to VCC + 0.5 V VI DC Input Voltage VO DC Output Voltage IIK DC Input Diode Current VIN < 0 V −50 IOK DC Output Diode Current VOUT < 0 V VOUT > VCC −50 +50 IO DC Output Sink Current ±50 mA ICC DC Supply Current per Supply Pin ±50 mA IGND DC Ground Current per Ground Pin TSTG Storage Temperature Range TL Lead Temperature, 1.0 mm from Case for 10 seconds mA mA ±50 mA − 65 to +150 °C 260 °C TJ Junction Temperature Under Bias +150 °C qJA Thermal Resistance (Note 1) 250 °C/W PD Power Dissipation in Still Air at 85°C 250 mW MSL FR Moisture Sensitivity Level 1 Flammability Rating Oxygen index: 28 to 34 UL 94 V−0 @ 0125 in Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. 1. Measured with minimum pad spacing on an FR4 board, using 10 mm−by−1 inch, 2 ounce copper trace no air flow. 2. Tested to EIA/JESD22−A114−A. 3. Tested to EIA/JESD22−A115−A. RECOMMENDED OPERATING CONDITIONS Symbol Parameter Min Max Units VCC Positive DC Supply Voltage 0.9 3.6 V VIN Digital Input Voltage 0 3.6 V Vout Output Voltage 0 VCC V IOH/IOL tA tr, tf Output Current VCC = 3.0 V to 3.6 V VCC = 2.3 V to 2.7 V VCC = 1.65 V to 1.95 V VCC = 1.4 V to 1.6 V VCC = 1.1 V to 1.3 V VCC = 0.9 V ±24 ±18 ±6 ±4 ±2 ±0.1 Operating Temperature Range. All Package Types Input Rise or Fall Time VCC = 3.3V ± 0.3 V DEVICE JUNCTION TEMPERATURE VERSUS TIME TO 0.1% BOND FAILURES Junction, Temperature °C Time, Hours Time, Years 80 1,032,200 117.8 90 419,300 47.9 100 178,700 20.4 110 79,600 9.4 120 37,000 4.2 130 17,800 2.0 140 8,900 1.0 http://onsemi.com 2 −40 +85 0 10 mA °C nS/V NL17SV00 DC CHARACTERISTICS– Digital Section (Voltages Referenced to GND) TA = 25°C Symbol Parameter VCC Min VIH High Level Input Voltage 0.90 1.10 ≤ VCC ≤ 1.30 1.40 ≤ VCC ≤ 1.60 1.65 ≤ VCC ≤ 1.95 2.30 ≤ VCC ≤ 2.70 2.70 ≤ VCC ≤ 3.60 0.65 x VCC 0.65 x VCC 0.65 x VCC 0.65 x VCC 1.6 2.0 VIL Low Level Input Voltage 0.90 1.10 ≤ VCC ≤ 1.30 1.40 ≤ VCC ≤ 1.60 1.65 ≤ VCC ≤ 1.95 2.30 ≤ VCC ≤ 2.70 2.70 ≤ VCC ≤ 3.60 VOH High Level Output Voltage VOL Low Level Output Voltage IIN Input Leakage Current IOFF Power Off Leakage Current ICC Quiescent Supply Current Condition TA = −40 to 85°C Max Min Max 0.65 x VCC 0.65 x VCC 0.65 x VCC 0.65 x VCC 1.6 2.0 0.35 x VCC 0.35 x VCC 0.35 x VCC 0.35 x VCC 0.7 0.8 Units V 0.35 x VCC 0.35 x VCC 0.35 x VCC 0.35 x VCC 0.7 0.8 V V IOH = −100 mA 0.90 1.10 ≤ VCC ≤ 1.30 1.40 ≤ VCC ≤ 1.60 1.65 ≤ VCC ≤ 1.95 2.30 ≤ VCC ≤ 2.70 2.70 ≤ VCC ≤ 3.60 VCC − 0.1 VCC − 0.1 VCC − 0.2 VCC − 0.2 VCC − 0.2 VCC − 0.2 VCC − 0.1 VCC − 0.1 VCC − 0.2 VCC − 0.2 VCC − 0.2 VCC − 0.2 IOH = −2.0 mA 1.10 ≤ VCC ≤ 1.30 0.75 x VCC 0.75 x VCC IOH = −4.0 mA 1.40 ≤ VCC ≤ 1.60 0.75 x VCC 0.75 x VCC IOH = −6.0 mA 1.65 ≤ VCC ≤ 1.95 2.30 ≤ VCC ≤ 2.70 1.25 2.0 1.25 2.0 IOH = −12 mA 2.30 ≤ VCC ≤ 2.70 2.70 ≤ VCC ≤ 3.60 1.8 2.2 1.8 2.2 IOH = −18 mA 2.30 ≤ VCC ≤ 2.70 2.70 ≤ VCC ≤ 3.60 1.7 2.4 1.7 2.4 IOH = −24 mA 2.70 ≤ VCC ≤ 3.60 2.2 IOL = 100 mA 0.90 1.10 ≤ VCC ≤ 1.30 1.40 ≤ VCC ≤ 1.60 1.65 ≤ VCC ≤ 1.95 2.30 ≤ VCC ≤ 2.70 2.70 ≤ VCC ≤ 3.60 0.1 0.1 0.2 0.2 0.2 0.2 0.1 0.1 0.2 0.2 0.2 0.2 IOL = 2.0 mA 1.10 ≤ VCC ≤ 1.30 0.25 x VCC 0.25 x VCC IOL = 4.0 mA 1.40 ≤ VCC ≤ 1.60 0.25 x VCC 0.25 x VCC IOL = 6.0 mA 1.65 ≤ VCC ≤ 1.95 0.3 0.3 IOL = 12 mA 2.30 ≤ VCC ≤ 2.70 2.70 ≤ VCC ≤ 3.60 0.4 0.4 0.4 0.4 IOL = 18 mA 2.30 ≤ VCC ≤ 2.70 2.70 ≤ VCC ≤ 3.60 0.6 0.4 0.6 0.4 IOL = 24 mA 2.70 ≤ VCC ≤ 3.60 0.55 0.55 0 = VI = 3.6 V 0.90 to 3.60 ±0.1 ±0.9 mA 0 1 5 mA 0.90 to 3.60 0.9 5 mA VI = VCC or GND http://onsemi.com 3 2.2 V NL17SV00 AC CHARACTERISTICS (Input tr = tf = 3.0 nS) −40°C 25°C Min Typ 85°C Symbol Parameter Condition VCC Max Min Max TPHL, TPLH Propagation Delay CL = 15 pF, RL = 1.0 MW 0.90 CL = 15 pF, RL = 2.0 kW 1.10 ≤ VCC ≤ 1.30 1.40 ≤ VCC ≤ 1.60 3.0 1.0 6.0 3.2 9.9 6.0 1.0 1.0 14.6 7.2 nS CL = 30 pF, RL = 500 W 1.65 ≤ VCC ≤ 1.95 2.30 ≤ VCC ≤ 2.70 2.70 ≤ VCC ≤ 3.60 1.0 0.8 0.7 1.9 1.2 1.0 4.5 2.6 2.3 1.0 0.7 0.6 5.3 3.7 3.0 nS 13 Units nS CIN Input Capacitance 0 2.0 pF COUT Output Capacitance 0 4.5 pF CPD Power Dissipation Capacitance 0.90 to 3.60 20 pF VI = 0 V or VCC F = 10 MHz http://onsemi.com 4 NL17SV00 PACKAGE DIMENSIONS SOT−553, 5 LEAD CASE 463B−01 ISSUE B D −X− 5 A 4 1 e 2 E −Y− 3 b NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETERS 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. L HE DIM A b c D E e L HE c 5 PL 0.08 (0.003) M X Y MILLIMETERS NOM MAX 0.55 0.60 0.22 0.27 0.13 0.18 1.60 1.70 1.20 1.30 0.50 BSC 0.10 0.20 0.30 1.50 1.60 1.70 MIN 0.50 0.17 0.08 1.50 1.10 INCHES NOM 0.022 0.009 0.005 0.063 0.047 0.020 BSC 0.004 0.008 0.059 0.063 MIN 0.020 0.007 0.003 0.059 0.043 MAX 0.024 0.011 0.007 0.067 0.051 0.012 0.067 SOLDERING FOOTPRINT* 0.3 0.0118 0.45 0.0177 1.35 0.0531 1.0 0.0394 0.5 0.5 0.0197 0.0197 SCALE 20:1 mm Ǔ ǒinches *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5773−3850 http://onsemi.com 5 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative NL17SV00XV5T2/D