AMPHENOL MS3450

Amphenol /Matrix MS/Standard
MIL-DTL-5015 Cylindrical Connectors
®
®
12-026-4
With Crimp Rear Release
Contacts
Qualified for Environmental
and Firewall Applications
Amphenol
This catalog covers the Amphenol ® /Matrix ® MILDTL-5015 Family of Connectors which incorporate
rear release crimp contacts. MIL-C-5015 has been
replaced by MIL-DTL-5015 for all Amphenol/Matrix
rear release crimp type connectors. These connectors
can be ordered through Amphenol, by military or
equivalent proprietary part numbers.
TABLE OF CONTENTS
Amphenol ® /Matrix ® MS/Standard Cylindrical
MIL-DTL-5015 Connectors with Crimp Rear Release
Contacts
Introduction, Table of Contents. . . . . . . . . . . . . . . . . .1
Should more information be required concerning the
connectors covered in this publication, or if special
application needs arise, please contact:
Amphenol Corporation
Amphenol Aerospace
40-60 Delaware Avenue
Sidney, New York 13838-1395
Telephone 607-563-5011
Fax: 607-563-5157
www.amphenol-aerospace.com
General Description, Features and Benefits. . . . . . . .2
Class Descriptions, Performance Specifications . . . .3
Shell Styles, Dimensional Data:
Wall Mounting Receptacle . . . . . . . . . . . . . . . . . . .4
Cable Connecting Receptacle . . . . . . . . . . . . . . . .5
Box Mounting Receptacle, . . . . . . . . . . . . . . . . . . .6
The MIL-DTL-5015 crimp rear release type connector
covered in this catalog, completes the MS/Standard
family of connectors, so that now Amphenol can provide users with the broadest range of product available
in the marketplace.
Jam Nut Receptacle. . . . . . . . . . . . . . . . . . . . . . . .7
Straight Plug. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Straight Plug with Self-Locking Coupling Nut. . . . .9
Catalog 12-020, Amphenol ® MIL-DTL-5015 and MIL5015 Type Standard Cylindrical Connectors, is also
available upon request. This catalog covers the MIL5015 cylindrical connectors with solder contacts. It
also covers the MIL-5015 type connectors with proprietary crimp contacts in a very broad range of insert
patterns - up to 280 different arrangements. Within
these connector styles, MIL-C-5015 has been
replaced as follows: Environmental classes F and R
are updated to and produced in strict accordance to
MIL-DTL-5015. Classes A, C and E are still produced,
but are no longer listed on the qualified products listing
(QPL).
Quick Disconnect Plugs,
with/without Lanyards. . . . . . . . . . . . . . . . . . . . . .10
Insert Arrangement Chart . . . . . . . . . . . . . . . . . .11, 12
Insert Alternate Positions . . . . . . . . . . . . . . . . . . . . .13
Insert Arrangement Patterns. . . . . . . . . . . . . . . 14 - 24
Contact Information, Sealing Plugs,
Crimping and Insertion/Removal Tools. . . . . . . . . . .25
Protection Caps . . . . . . . . . . . . . . . . . . . . . . . . . 26-28
How to Order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Also, ask for these additional Amphenol Product Catalogs:
Amphenol Industrial Connector Brochure, SL-381,
for an overview of the industrial family of connectors.
Amphenol Brochure SL-100, which provides an
overview of all products, military and industrial,
offered through Amphenol Aerospace.
Visit our website www.amphenol-aerospace.com
for this catalog and other catalogs of
Amphenol products.
Additional MS/Standard Connectors
offered by Amphenol. . . . . . . . . . . . . . . . . . . . . . . . .30
Sales Office Listing
Amphenol Aerospace operates Quality Systems that are
Certified to ISO-9001 and AS-9100 by third party
Registrars.
1
®
Amphenol ® /Matrix MS/Standard
Cylindrical
MIL-DTL-5015 Connectors with
crimp rear release contacts
Amphenol broadens their MS/Standard family of connectors with the MIL-DTL-5015 Crimp Rear Release Series.
This series provides an alternative to the older MIL-C-5015
solder type. It bridges the gap between an old connector standard and the environmental and high performance needs of
current technologies.
MS3450
wall mounting receptacle
MS3451
cable connecting receptacle
DESIGN CHARACTERISTICS
• Medium to heavy weight cylindrical
• MS345( ) series intermateable with existing MIL-DTL5015 solder or crimp versions on existing equipment
• Captive coupling nut mechanism, utilizes retaining rings in
combination with “L” washers to prevent inadvertent disassembly
• Multiple interlock systems ensure permanent insert retention
• Positive control of dielectric separation with guaranteed
ease of contact insertion
• Positive contact retention provided by a closely toleranced
damage-proof metal retention clip
• Completely sealed against environmental extremes with • individual contact seals (conical risers on pin interface)
• interfacial seals between contacts
• peripheral gasket shell-to-shell seals
• redundant rear wire seals and insert-to-shell seals
MS3452
box mounting receptacle
MS3454
jam nut receptacle
MS3456
plug with threaded
coupling
CUSTOMER OPTIONS
• Seven mounting styles, in shell sizes 8 to 48*
• Threaded coupling or self-locking plug (MS3459) with an
internal racheting mechanism to prevent unmating due to
vibration and shock, eliminating the need for safety wiring
• Proprietary quick disconnect plug, with or without lanyard
available
• Classes include aluminum or stainless steel shells, or
firewall capability
• MS and Proprietary versions available
• Some styles are supplied to McDonnell Douglas Specification BAN 7025, DC60 Series
• Accommodation of contact sizes 0 to 16
• Over 100 insert arrangement patterns available, accommodating from a minimum of 1 to a maximum of 85 circuits
• Alternate positioning available
• Thermocouple pin and socket contacts are available**
MS3459
plug with self-locking
coupling nut
Proprietary quick disconnect
plug with/without lanyard
NOTE: MIL-C-5015 is superceded to MIL-DTL-5015 for all Amphenol/Matrix rear
release crimp type contacts.
* Consult Amphenol, Sidney, NY for availability of shell sizes 44 and 48.
** Consult Amphenol, Sidney, NY for information on thermocouple contacts.
2
®
Amphenol ®/Matrix MS/Standard
Cylindrical
MIL-DTL-5015 Connectors
class descriptions, performance specifications
CLASS DESCRIPTIONS
Amphenol/Matrix
Military MIL-DTL-5015
Class L*
aluminum shell, electroless nickel finish,
fluid resistant insert
Class A
aluminum shell, black anodize finish,
fluid resistant insert
Class W
aluminum shell, cadmium olive drab finish,
fluid resistant insert
Class F
aluminum shell, electroless nickel finish,
fluid resistant insert
Class LS
stainless steel shell, passivated, fluid resistant
insert
Class W
aluminum shell, cadmium/olive drab finish,
fluid resistant insert
Class KT**
firewall, steel shell, cadmium olive drab finish, nonflammable hard dielectric and fluid resistant insert
Class FS
stainless steel shell, passivated, fluid resistant insert
Class KT
firewall, steel shell, cadmium olive drab finish, nonflammable hard dielectric and fluid resistant insert
Class KS
firewall, stainless steel shell, passivated, non-flammable hard dielectric and fluid resistant insert
Class KS
firewall, stainless steel shell, passivated, non-flammable hard dielectric and fluid resistant insert
* Class L inactivates older Class U (aluminum, electroless nickel)
** Class KT (ferrous alloy, cadmium/olive drab) inactivates older Class K (ferrous
alloy, electroless nickel)
PERFORMANCE SPECIFICATIONS
VOLTAGE RATING
Altitude
Inst.
A
D
E
B
C
Sea Level
1000
2000
2800
3500
4500
7000
50,000 ft.
400
600
675
750
825
975
70,000 ft.
260
360
400
440
480
560
110,000 ft.
200
200
200
200
200
200
SHOCK
Wired, mated connectors are subjected to one shock in each of three mutually perpendicular axes with pulse of an approximate half sine wave of 50g
magnitude for a duration of 11 milliseconds. All contacts wired in series circuit with 100 ±10 milliamperes of current flow.
OPERATING TEMPERATURE RANGE
Classes L, LS and KS have temperature range of
–55°C (–75°F) to 200°C (392°F)
Classes W and KT have temperature range of
–55°C (–75°F) to 175°C (347°F)
ENVIRONMENTAL SEAL
Wired, mated connectors with the specified accessory attached will meet
the altitude immersion test specified in MIL-DTL-5015.
DURABILITY
Minimum of 100 mating cycles.
3
MS/Standard
MS3450
wall mounting receptacle
Receptacle Shell, Flange Wall Mount,
Threaded Coupling
J Coupling
Thread
A Typ.
Military No. MS3450
Amphenol/Matrix No. 9440
Blue Color Band
H Accessory Thread
Polarizing
Key
B Typ.
3 Teeth Equally
Placed 120 ˚ Apart
E Dia.
Max
G Min. Full
Thread
C Dia.
4 Holes
K
F
B Typ.
D Max.
L Dia.
C Dia.
PANEL CUTOUT
To complete order number see how to order, page 29.
C Dia.
+.010
–.005
Shell
Size*
A
±.031
B
Class
A, F, R,
W
8S
10S
10SL
12
12S
14
14S
16
16S
18
20
22
24
28
32
36
40
.875
1.000
1.000
1.094
1.094
1.188
1.188
1.281
1.281
1.375
1.500
1.625
1.750
2.000
2.250
2.500
2.750
.594
.719
.719
.812
.812
.906
.906
.969
.969
1.062
1.156
1.250
1.375
1.562
1.750
1.938
2.188
.120
.120
.120
.120
.120
.120
.120
.120
.120
.120
.120
.120
.147
.147
.173
.173
.173
D Max.
Class
K
.150
.150
.150
.150
.150
.150
.150
.150
.150
.177
.177
.177
.177
.177
.209
.209
.209
Size
Size
16 & 12
8, 4, 0
Contacts Contacts
2.031
2.031
2.031
2.125
2.031
2.125
2.031
2.125
2.031
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
–
–
–
–
–
–
–
2.500
–
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
E
Dia.
Max.
.305
.405
.405
.549
.549
.665
.665
.790
.790
.869
.994
1.119
1.244
1.465
1.715
1.930
2.145
* Consult Amphenol, Sidney, NY for availability of shell sizes 44 and 48.
4
F
G
MIn.
H
Thread
Class 2A
J
Thread
Class 2A
K
L
Dia.
±.010
.593/.562
.593/.562
.593/.562
.781/.750
.593/.562
.781/.750
.593/.562
.781/.750
.593/.562
.781/.750
.781/.750
.781/.750
.843/.812
.843/.812
.906/.875
.906/.875
.906/.875
.290
.290
.290
.290
.290
.290
.290
.290
.290
.290
.290
.290
.290
.467
.467
.467
.467
.5000-20 UNEF
.6250-24 UNEF
.6250-24 UNEF
.7500-20 UNEF
.7500-20 UNEF
.8750-20 UNEF
.8750-20 UNEF
1.0000-20 UNEF
1.0000-20 UNEF
1.0625-18 UNEF
1.1875-18 UNEF
1.3125-18 UNEF
1.4375-18 UNEF
1.7500-18 UNS
2.0000-18 UNS
2.2500-16 UN
2.5000-16 UN
.5000-28 UNEF
.6250-24 UNEF
.6250-24 UNEF
.7500-20 UNEF
.7500-20 UNEF
.8750-20 UNEF
.8750-20 UNEF
1.0000-20 UNEF
1.0000-20 UNEF
1.1250-18 UNEF
1.2500-18 UNEF
1.3750-18 UNEF
1.5000-18 UNEF
1.7500-18 UNS
2.0000-18 UNS
2.2500-16 UN
2.5000-16 UN
.083
.083
.083
.083
.083
.083
.083
.083
.083
.125
.125
.125
.125
.125
.125
.125
.125
.562
.688
.688
.812
.812
.938
.938
1.062
1.062
1.188
1.312
1.438
1.562
1.812
2.062
2.312
2.562
MS/Standard
MS3451
cable connecting receptacle
Receptacle Shell, Cable Connecting,
Threaded Coupling
Military No. MS3451
Amphenol/Matrix No. 9441
Polarizing Key
Blue Color
Band
A
J
Coupling
Thread
H Accessory Thread
3 Teeth Equally
Placed 120˚ Apart
B
Dia.
E Dia.
Max
G
C
F
D Max.
To complete order number see how to order, page 29.
Shell
Size
A
B
Dia.
±.031
8S
10S
10SL
12
12S
14
14S
16
16S
18
20
22
24
28
32
36
40
.504/.496
.629/.621
.629/.621
.754/.746
.754/.746
.879/.871
.879/.871
1.005/.996
1.005/.996
1.131/1.121
1.256/1.246
1.381/1.371
1.506/1.496
1.756/1.746
2.007/1.996
2.257/2.246
2.511/2.456
.729
.854
.854
.974
.974
1.099
1.099
1.224
1.224
1.349
1.474
1.599
1.715
1.974
2.224
2.474
2.724
C
.577/.562
.577/.562
.577/.562
.765/.750
.577/.562
.765/.750
.577/.562
.765/.750
.577/.562
.765/.750
.765/.750
.765/.750
.827/.812
.827/.812
.890/.870
.890/.870
.890/.870
D Max.
Size
Size
16 & 12
8, 4, 0
Contacts Contacts
2.031
2.031
2.031
2.125
2.031
2.125
2.031
2.125
2.031
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
–
–
–
–
–
–
–
2.500
–
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
* Consult Amphenol, Sidney, NY for availability of shell sizes 44 and 48.
5
E
Dia.
Max.
F
±.015
G
MIn.
H
Thread
Class 2A
J
Thread
Class 2A
.305
.405
.405
.549
.549
.665
.665
.790
.790
.869
.994
1.119
1.244
1.465
1.715
1.930
2.145
.083
.083
.083
.083
.083
.083
.083
.083
.083
.125
.125
.125
.125
.125
.125
.125
.125
.290
.290
.290
.290
.290
.290
.290
.290
.290
.290
.290
.290
.290
.467
.467
.467
.467
.5000-20 UNEF
.6250-24 UNEF
.6250-24 UNEF
.7500-20 UNEF
.7500-20 UNEF
.8750-20 UNEF
.8750-20 UNEF
1.0000-20 UNEF
1.0000-20 UNEF
1.0625-18 UNEF
1.1875-18 UNEF
1.3125-18 UNEF
1.4375-18 UNEF
1.7500-18 UNS
2.0000-18 UNS
2.2500-16 UN
2.5000-16 UN
.5000-28 UNEF
.6250-24 UNEF
.6250-24 UNEF
.7500-20 UNEF
.7500-20 UNEF
.8750-20 UNEF
.8750-20 UNEF
1.0000-20 UNEF
1.0000-20 UNEF
1.1250-18 UNEF
1.2500-18 UNEF
1.3750-18 UNEF
1.5000-18 UNEF
1.7500-18 UNS
2.0000-18 UNS
2.2500-16 UN
2.5000-16 UN
MS/Standard
MS3452
box mounting receptacle
Receptacle Shell, Flange Box Mount,
Threaded Coupling
J Coupling
Thread
A Typ.
Military No. MS3452
Amphenol/Matrix No. 9442
Blue Color Band
Polarizing
Key
B Typ.
E Dia.
Max
C Dia.
4 Holes
G
F
B Typ.
D Max.
L Dia.
C Dia.
PANEL CUTOUT
To complete order number see how to order, page 29.
Shell
Size*
A
±.031
B
C
Dia.
8S
10S
10SL
12
12S
14
14S
16
16S
18
20
22
24
28
32
36
40
.875
1.000
1.000
1.094
1.094
1.188
1.188
1.281
1.281
1.375
1.500
1.625
1.750
2.000
2.250
2.500
2.750
.594
.719
.719
.812
.812
.906
.906
.969
.969
1.062
1.156
1.250
1.375
1.562
1.750
1.938
2.188
.130/.115
.130/.115
.130/.115
.130/.115
.130/.115
.130/.115
.130/.115
.130/.115
.130/.115
.130/.115
.130/.115
.130/.115
.157/.142
.157/.142
.183/.168
.183/.168
.183/.168
D Max.
Size
Size
16 & 12
8, 4, 0
Contacts Contacts
1.662
1.662
1.662
1.662
1.662
1.662
1.662
1.662
1.662
1.662
1.662
1.662
1.662
1.662
1.662
1.662
1.662
–
–
–
–
–
–
–
1.937
–
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
E
Dia.
±.016
.500
.625
.625
.750
.750
.875
.875
1.000
1.000
1.062
1.187
1.312
1.437
1.750
2.000
2.250
2.500
* Consult Amphenol, Sidney, NY for availability of shell sizes 44 and 48.
6
F
G
±.015
J
Thread
Class 2A
L
Dia.
±.010
.578/.562
.578/.562
.578/.562
.765/.750
.578/.562
.765/.750
.577/.562
.765/.750
.577/.562
.765/.750
.765/.750
.765/.750
.827/.812
.827/.812
.988/.875
.988/.875
.988/.875
.083
.083
.083
.083
.083
.083
.083
.083
.083
.125
.125
.125
.125
.125
.125
.125
.125
.5000-28 UNEF
.6250-24 UNEF
.6250-24 UNEF
.7500-20 UNEF
.7500-20 UNEF
.8750-20 UNEF
.8750-20 UNEF
1.0000-20 UNEF
1.0000-20 UNEF
1.1250-18 UNEF
1.2500-18 UNEF
1.3750-18 UNEF
1.5000-18 UNEF
1.7500-18 UNS
2.0000-18 UNS
2.2500-16 UN
2.5000-16 UN
.562
.688
.688
.812
.812
.938
.938
1.062
1.062
1.188
1.312
1.438
1.562
1.812
2.062
2.312
2.562
MS/Standard
MS3454
jam nut receptacle
Receptacle Shell, Jam Nut Mount,
Threaded Coupling
Military No. MS3454
Amphenol/Matrix No. 9444
A Typ.
.045
.035
Pin Protrusion
Polarizing
Key
D Max
.180
.165
F
Blue Color
Band
H Accessory
Thread
C
Dia.
E
Dia
Max.
B
Typ.
J Coupling
Thread
.100
.095
O-Ring
.196
.186
3 Teeth
Equally Spaced
120 ˚ Apart
.128 Max.
Panel Thickness
L
G
Min. Full Thread
M
Dia.
PANEL CUTOUT
To complete order number see how to order, page 29.
Panel Cutout
Dimensions
D Max.
Shell
Size*
A
±.010
B
±.005
C
Dia.
±.005
8S
10S
10SL
12
12S
14
14S
16
16S
18
20
22
24
28
32
36
40
.687
.812
.812
.937
.937
1.125
1.125
1.250
1.250
1.375
1.500
1.625
1.750
2.000
2.375
2.625
2.875
1.187
1.312
1.312
1.437
1.437
1.562
1.562
1.687
1.687
1.812
1.937
2.156
2.281
2.531
2.781
3.031
3.281
1.272
1.397
1.397
1.522
1.522
1.647
1.647
1.772
1.772
1.897
2.022
2.241
2.366
2.616
2.866
3.116
3.366
Size
Size
8, 4, 0
16 & 12
Contacts Contacts
2.031
2.031
2.031
2.125
2.031
2.125
2.031
2.125
2.031
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
–
–
–
–
–
–
–
2.500
–
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
E
Dia.
Max.
F
±.005
G
MIn.
H
Thread
Class 2A
J
Thread
Class 2A
L
±.005
M Dia.
+.015
–.000
.305
.405
.405
.549
.549
.665
.665
.790
.790
.869
.994
1.119
1.244
1.465
1.715
1.930
2.145
.720
.720
.720
.970
.720
.970
.720
.970
.720
.970
.970
.970
.970
.970
.970
.970
.970
.290
.290
.290
.290
.290
.290
.290
.290
.290
.290
.290
.290
.290
.467
.467
.467
.467
.5000-20 UNEF
.6250-24 UNEF
.6250-24 UNEF
.7500-20 UNEF
.7500-20 UNEF
.8750-20 UNEF
.8750-20 UNEF
1.0000-20 UNEF
1.0000-20 UNEF
1.0625-18 UNEF
1.1875-18 UNEF
1.3125-18 UNEF
1.4375-18 UNEF
1.7500-18 UNS
2.0000-18 UNS
2.2500-16 UN
2.5000-16 UN
.5000-28 UNEF
.6250-24 UNEF
.6250-24 UNEF
.7500-20 UNEF
.7500-20 UNEF
.8750-20 UNEF
.8750-20 UNEF
1.0000-20 UNEF
1.0000-20 UNEF
1.1250-18 UNEF
1.2500-18 UNEF
1.3750-18 UNEF
1.5000-18 UNEF
1.7500-18 UNS
2.0000-18 UNS
2.2500-16 UN
2.5000-16 UN
.323
.385
.385
.448
.448
.510
.510
.573
.573
.635
.698
.760
.823
.948
1.073
1.198
1.323
.505
.630
.630
.755
.755
.880
.880
1.005
1.005
1.130
1.255
1.380
1.505
1.755
2.005
2.255
2.505
* Consult Amphenol, Sidney, NY for availability of shell sizes 44 and 48.
7
MS/Standard
MS3456
straight plug
Plug Shell,
Threaded Coupling
Military No. MS3456
Amphenol/Matrix No. 9446
Polarizing Keyway
Blue Color Band
A
Dia Max.
J Coupling
Thread
H Accessory Thread
3 Teeth
Equally Spaced
120 ˚ Apart
E
Dia
Max.
B
Dia.
D Min. Full
Thread
C Max.
To complete order number see how to order, page 29.
Shell
Size*
A
Dia.
Max.
B
Dia.
±.005
8S
10S
10SL
12
12S
14
14S
16
16S
18
20
22
24
28
32
36
40
.844
.969
.969
1.062
1.062
1.156
1.156
1.250
1.250
1.344
1.469
1.594
1.719
1.969
2.219
2.469
2.719
.360
.435
.441**
.550
.550
.670
.670
.800
.800
.925
1.045
1.170
1.295
1.515
1.765
1.975
2.225
C Max.
Size
Size
16 & 12
8, 4, 0
Contacts Contacts
2.031
2.031
2.031
2.125
2.031
2.125
2.031
2.125
2.031
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
–
–
–
–
–
–
–
2.500
–
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
D
MIn.
E
Dia.
Max.
H
Thread
Class 2A
J
Thread
Class 2B
.290
.290
.290
.290
.290
.290
.290
.290
.290
.290
.290
.290
.290
.467
.467
.467
.467
.305
.405
.405
.549
.549
.665
.665
.790
.790
.869
.994
1.119
1.244
1.465
1.715
1.930
2.145
.5000-20 UNF
.6250-24 UNEF
.6250-24 UNEF
.7500-20 UNEF
.7500-20 UNEF
.8750-20 UNEF
.8750-20 UNEF
1.0000-20 UNEF
1.0000-20 UNEF
1.0625-18 UNEF
1.1875-18 UNEF
1.3125-18 UNEF
1.4375-18 UNEF
1.7500-18 UNS
2.0000-18 UNS
2.2500-16 UN
2.5000-16 UN
.5000-28 UNEF
.6250-24 UNEF
.6250-24 UNEF
.7500-20 UNEF
.7500-20 UNEF
.8750-20 UNEF
.8750-20 UNEF
1.0000-20 UNEF
1.0000-20 UNEF
1.1250-18 UNEF
1.2500-18 UNEF
1.3750-18 UNEF
1.5000-18 UNEF
1.7500-18 UNS
2.0000-18 UNS
2.2500-16 UN
2.5000-16 UN
* Consult Amphenol, Sidney, NY for availability of shell sizes 44 and 48.
** Tolerance on this dimension is +.000 –.006
8
MS/Standard
MS3459
straight plug with self-locking coupling nut
Plug Shell, Self-Locking,
Threaded Coupling
Military No. MS3459
Amphenol/Matrix No. 9816
Polarizing Keyway
Fully Coupled
Indicator
Blue Color Band
A
Dia Max.
J Coupling
Thread
H Accessory Thread
3 Teeth
Equally Spaced
120˚ Apart
E
Dia
Max.
B
Dia.
D Min. Full
Thread
Clutch Plate
C Max.
To complete order number see how to order, page 29.
Shell
Size*
A
Dia.
Max.
B
Dia.
±.005
8S
10S
10SL
12
12S
14
14S
16
16S
18
20
22
24
28
32
36
40
.963
1.088
1.088
1.213
1.213
1.358
1.358
1.463
1.463
1.588
1.713
1.788
1.963
2.213
2.463
2.713
2.963
.360
.435
.441**
.550
.550
.670
.670
.800
.800
.925
1.045
1.170
1.295
1.515
1.765
1.975
2.225
C Max.
Size
Size
16 & 12
8, 4, 0
Contacts Contacts
1.510
1.510
1.510
1.780
1.510
1.780
1.510
1.780
1.510
1.850
1.850
1.850
1.850
1.850
1.850
1.850
1.850
–
–
–
–
–
–
–
2.500
–
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
D
MIn.
E
Dia.
Max.
H
Thread
Class 2A
J
Thread
Class 2B
.290
.290
.290
.290
.290
.290
.290
.290
.290
.290
.290
.290
.290
.467
.467
.467
.467
.305
.405
.405
.549
.549
.665
.665
.790
.790
.869
.994
1.119
1.244
1.465
1.715
1.930
2.145
.5000-20 UNEF
.6250-24 UNEF
.6250-24 UNEF
.7500-20 UNEF
.7500-20 UNEF
.8750-20 UNEF
.8750-20 UNEF
1.0000-20 UNEF
1.0000-20 UNEF
1.0625-18 UNEF
1.1875-18 UNEF
1.3125-18 UNEF
1.4375-18 UNEF
1.7500-18 UNS
2.0000-18 UNS
2.2500-16 UN
2.5000-16 UN
.5000-28 UNEF
.6250-24 UNEF
.6250-24 UNEF
.7500-20 UNEF
.7500-20 UNEF
.8750-20 UNEF
.8750-20 UNEF
1.0000-20 UNEF
1.0000-20 UNEF
1.1250-18 UNEF
1.2500-18 UNEF
1.3750-18 UNEF
1.5000-18 UNEF
1.7500-18 UNS
2.0000-18 UNS
2.2500-16 UN
2.5000-16 UN
* Consult Amphenol, Sidney, NY for availability of shell sizes 44 and 48.
** Tolerance on this dimension is +.000 –.006
9
MS/Standard
9817, 9818
quick disconnect plug, with/without lanyard
Plug Shell, Quick Disconnect,
Push-pull Coupling
Amphenol/Matrix No. 9817 with lanyard
Amphenol/Matrix No. 9818 without lanyard
C Max.
A
Dia Max.
D Min. Perf.
Thread
Polarizing
Keyway
H Thread
B Dia.
E Dia. Max.
.061
.046
3 Teeth
Equally Spaced
120 ˚ Apart
Blue Color Band Designates
Rear Release Contact Connector
9818 Connector
7.500 Max
9817 Connector with Lanyard
Receptacle Adapter Ring
Required to mate the quick disconnect plug
with receptacle.
To complete order number see how to order, page 29.
Shell
Size*
A
Dia.
Max.
B
Dia.
8S
10S
10SL
12
12S
14
14S
16
16S
18
20
22
24
28
32
36
40
1.087
1.224
1.224
1.355
1.355
1.482
1.482
1.609
1.609
1.817
1.942
2.075
2.203
2.516
2.735
3.015
3.306
.360
.435
.441
.550
.550
.670
.670
.800
.800
.925
1.045
1.170
1.295
1.515
1.765
1.975
2.225
C Max.
Size
Size
16 & 12
8, 4, 0
Contacts Contacts
2.031
2.031
2.031
2.125
2.031
2.125
2.031
2.125
2.031
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
–
–
–
–
–
–
–
2.500
–
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
D
MIn.
E
Dia.
Max.
H
Thread
Class 2A
Amphenol/
Matrix Part
Number for
Adapter Ring
.290
.290
.290
.290
.290
.290
.290
.290
.290
.290
.290
.290
.290
.467
.467
.467
.467
.305
.405
.405
.549
.549
.665
.665
.790
.790
.869
.994
1.119
1.244
1.465
1.715
1.930
2.145
.5000-20 UNF
.6250-24 UNEF
.6250-24 UNEF
.7500-20 UNEF
.7500-20 UNEF
.8750-20 UNEF
.8750-20 UNEF
1.0000-20 UNEF
1.0000-20 UNEF
1.0625-18 UNEF
1.1875-18 UNEF
1.3125-18 UNEF
1.4375-18 UNEF
1.7500-18 UNS
2.0000-18 UNS
2.2500-16 UN
2.5000-16 UN
2500-008-0X08
2500-008-0X10
2500-008-0X10
2500-008-0X12
2500-008-0X13
2500-008-0X14
2500-008-0X15
2500-008-0X16
2500-008-0X17
2500-008-0X18
2500-008-0X20
2500-008-0X22
2500-008-0X24
2500-008-0X28
2500-008-0X32
2500-008-0X36
2500-008-0X40
* Consult Amphenol, Sidney, NY for availability of shell sizes 44 and 48.
10
Not furnished with the quick disconnect plug
and must be ordered separately.
Note: Use Locktite Material on the threads for
a permanent installation to the shell.
Adapter
Mating Face of
Receptacle Shell
How to Order Adapter Ring
Part Number
2500-008-0 X XX
Shell Size (varies from
connector shell size
designation, see last
column of table at left)
Finish
0 - Electroless Nickel
1 - Black Anodize
2 - Cadmium/olive drab
3 - Stainless steel,
passivated
MS/Standard
insert arrangements
Insert
Arrangement
Service
Rating
Total
Contacts
8S-1
A
10S-2
10SL-3
Contact Size
Contact Size
16
Insert
Arrangement
Service
Rating
Total
Contacts
1
1
18-23
A/Inst.
10
A
1
1
18-24
A/Inst.
10
A
3
3
18-27
D
3
2
1
10SL-4
A
2
2
18-28
D
3
2
1
12S-1
A
2
2
20-2
D
1
12S-2
A
2
2
20-4
D
4
12S-3
A
2
2
20-7
D/A
8
12S-4
D
1
1
20-8
Inst.
6
12-5
D
1
14S-1**
A
3
Inst.
4
A
1
14S-5
Inst.
5
14S-6
Inst.
14S-7
0
4
8
12
1
0
4
8
12
16
10
10
1
4
8
2
4
20-9*
D/A
8
3
20-14
A
5
4
20-15
A
7
7
20-16
A
9
2
7
5
20-17
A
6
5
1
6
6
20-18
A
9
3
6
A
3
3
20-19
A
3
14S-9**
A
2
2
20-21
A
9
1
8
14S-10
Inst.
4
4
20-22
A
6
3
14S-11
Inst.
4
4
20-24
A
4
2
14S-12
A
3
3
20-27
A
14
14
14S-13
A
3
3
20-29
A
17
17
16S-1
A
7
7
20-32
D/A
8
8
16-2*
E
1
20-33
A
11
11
16S-3*
B
1
1
22-2
D
3
3
16S-4*
D
2
2
22-4**
A
4
2
16-7*
A
3
2
22-5
D
6
16S-8
A
5
5
22-6*
D
3
16-9
A
4
2
2
22-7*
E
1
16-10
A
3
3
22-9*
E
3
16-11
A
2
2
22-10*
E
4
16-12
A
1
22-11*
B
2
16-13
A
2
22-12*
D
5
18-1
A/Inst.
10
10
22-14
A
19
18-4
D
4
4
22-15*
E/A
6
5
18-5
D
3
1
22-17*
D/A
9
1
18-6*
D
1
22-18*
D/A
8
14S-2
14-3
1
1
1
1
2
2
1
18-7*
B
1
22-19
A
14
18-8
A
8
1
1
7
22-21
A
3
18-9
Inst.
7
2
5
22-22
A
4
1
2
3
3
2
2
2
2
1
3
4
2
2
3
19
2
4
A
4
4
22-23
D/A
8
5
5
22-27*
D/A
9
18-12*
A
6
22-30
A
19
18-13
A
4
22-32
D
6
2
18-14*
A
2
22-36*
D/A
8
8
18-15*
A
4
4
24-1**
D
2
18-16*
C
1
1
24-2
D
7
18-17
Inst.
7
2
5
24-4*
D
4
18-18
Inst.
7
2
5
24-5**
A
16
18-19**
A
10
10
24-6*
D/A
8
18-22**
D
3
3
3
1
8
1
8
19
1
4
1
7
1
* Consult Amphenol, Sidney, NY for availability
** Inactive for new design
11
8
14
1
A
1
1
8
18-11
1
4
1
18-10**
6
7
3
3
16
8
MS/Standard
insert arrangements
Contact Size
Insert
Arrangement
Service
Rating
Total
Contacts
24-7
A
16
24-10
A
7
24-11
A
9
24-12
A
5
24-15
A
16
24-16*
D/A
7
24-20
D
11
24-21*
D
10
1
24-22
D
4
4
24-24
A
16
24-27*
E
7
24-28
Inst.
24-80*
Inst.
28-1
D/A
9
28-2
D
14
28-3*
E
3
28-4*
E/D
9
28-5*
D
5
28-8*
E/D/A
28-9
D
28-10
D/A
7
28-11
A
22
28-12
A
28-13
0
4
8
12
16
Insert
Arrangement
Service
Rating
Total
Contacts
2
14
32-22*
A
54
32-63
D
5
7
3
2
Contact Size
0
4
8
12
16
54
5
6
32-73
A
46
3
36-3
D
6
3
46
3
16
36-5
A
4
4
3
3
36-6
A
6
2
2
9
36-7
A
47
7
9
36-8
A
47
1
46
36-9
A
31
14
14
16
36-10
A
48
48
7
36-11
A
48
48
24
24
36-12
A
48
48
23
23
36-15
D/A
35
35
36-16
A
47
7
36-17
A
47
7
40
36-18
A
31
1
2
14
14
1
2
14
14
1
3
6
2
12
3
4
1
2
40
40
2
7
36-21
A
31
1
2
36-52
A
52
12
2
10
36-66*
A
56
4
52
12
6
6
40-1
D
30
6
24
2
52
40-2*
D
23
18
40-3*
D
23
1
26
26
40-4*
D
23
2
A
26
26
40-5*
A
15
2
28-15
A
35
35
40-6*
D
26
1
1
24
28-16*
A
20
20
40-7*
A/D
22
2
2
18
28-17
B/D/A
15
15
40-9
A
47
22
24
28-18*
C/D/A/Inst.
12
12
40-10*
A
29
28-19*
B/D/A
10
4
6
40-11*
D
25
4
18
28-20
A
14
10
4
40-56*
A
85
85
28-21
A
37
37
40-62*
A
60
60
28-22
D
6
32-1
E/D
5
32-2*
E
5
32-3*
D
9
32-6
A
23
32-7
Inst./A
35
32-9
D
14
32-13
D
23
32-15
D
8
32-16
A
23
2
32-17
D
4
4
32-19*
E/D
5
32-20
A
23
2
2
3
4
3
3
2
2
2
2
3
2
4
2
16
7
28
2
12
5
2
18
6
3
2
3
2
2
16
3
2
3
16
12
18
3
2
16
4
6
1
1
* Consult Amphenol, Sidney, NY for availability
** Inactive for new design
3
3
1
23
4
4
9
1
1
16
MS/Standard
insert alternate positioning
To avoid cross-plugging problems in applications requiring
the use of more than one connector of the same size and
arrangement, alternate rotations are available as indicated
in the accompanying charts.
As shown in the diagram below, the front face of the pin
insert is rotated within the shell in a clockwise direction from
the normal shell key. The socket insert would be rotated
counter-clockwise the same number of degrees in respect to
the normal shell key.
The charts give the W, X, Y, Z positions for the alternate
rotations available for the insert arrangements of the rear
release MIL-DTL-5015 series of connectors. If an insert
arrangement number is not given, then there is no available
alternate rotation for that pattern.
The following insert arrangements have the same alternate
insert rotations for W, X, Y and Z, which are:
Degrees
W
X
Y
Z
80
110
250
280
16-7
20-22
24-4
28-4
28-21
40-3
18-5
22-6
24-5
28-8
32-1
40-4
22-12
24-6
28-9
32-3
40-5
18-13
22-14
24-7
28-10
32-6
40-6
18-14
22-15
24-12
28-11
32-9
40-7
20-7
22-17
24-16
28-15
32-13
40-11
20-8
22-18
24-20
28-16
32-22
20-9
22-19
24-21
28-17
36-7
20-14
22-21
24-28
28-19
36-8
20-16
24-1
28-1
28-20
40-2
B
A
B
A
A
B
A
B
18-9
Position W
Position X
Position Y
Position Z
View looking into front face of pin insert or rear of socket insert.
Insert
Arrangement
Degrees
W
X
Y
Z
12S-3
70
145
215
290
14S-2
–
120
240
14S-5
–
110
–
14S-7
90
180
270
14S-9
70
145
16S-1
80
16S-4
35
16S-8
–
16-9
Insert
Arrangement
Degrees
W
X
Y
Z
20-17
90
180
270
–
–
20-18
35
110
250
–
20-19
90
180
270
–
20-21
35
110
215
290
20-24
35
–
–
280
20-27
110
250
325
20-29
170
265
–
35
110
250
16-10
90
180
16-11
35
Insert
Arrangement
Degrees
W
X
Y
Z
28-2
35
110
250
325
325
28-3
70
145
215
290
–
28-5
35
110
250
325
250
325
28-12
90
180
270
–
110
250
325
28-18
70
145
215
290
35
110
250
325
28-22
70
145
215
290
80
–
–
280
32-2
70
145
215
290
22-2
70
145
215
290
32-7
80
125
235
280
325
22-4
35
110
250
325
32-15
35
110
250
280
270
–
22-5
35
110
250
325
32-17
45
110
250
–
110
250
325
22-9
70
145
215
290
32-73
36
–
–
–
290
16-13
35
110
250
325
22-10
35
110
250
325
36-3
70
145
215
18-1
70
145
215
290
22-11
35
110
250
325
36-5
–
120
240
–
18-4
35
110
250
325
22-22
–
110
250
–
36-6
35
110
250
325
18-8
70
–
–
290
22-23
35
–
250
–
36-9
80
125
235
280
18-10
–
120
240
–
22-27
80
–
250
280
36-10
80
125
235
280
18-11
–
170
265
–
22-36
90
–
270
–
36-15
60
125
245
305
18-12
80
–
–
280
24-2
80
–
–
280
36-52
72
144
216
288
18-15
–
120
240
–
24-10
80
–
–
280
36-66
110
250
260
280
18-19
–
120
240
–
24-11
35
110
250
325
40-1
65
130
235
300
18-22
70
145
215
290
24-22
45
110
250
–
40-9
65
125
255
310
20-4
45
110
250
–
24-27
80
–
–
280
40-10
65
125
255
310
20-15
80
–
–
280
24-80
35
145
240
300
40-56
72
144
216
288
40-62
30
130
220
290
13
MS/Standard
contact arrangements
front face of pin insert or rear face of socket insert illustrated
100˚
C
A
B
Insert Arrangement
B
B
B
A
A
B
A
A
250˚
100° Rotation
of 12S-3
250° Rotation
of 12S-3
8S-1
10S-2
10SL-3
10SL-4
12S-1
12S-2
12S-3
Service Rating
A
A
A***
A
A
A
A
Number of Contacts
1
1
3
2
2
2
2
Contact Size
16
16
16
16
16
16
16
C
A
B
D
A
C
B
A
E
F
A
D
C
B
E
B
D
C
Insert Arrangement
12S-4
12-5
14S-1**
14S-2
14-3
14S-5
14S-6
Service Rating
D
D
A
Inst.
A
Inst.
Inst.
Number of Contacts
1
1
3
4
1
5
6
Contact Size
16
12
16
16
8
16
16
100˚
100˚
B
A
D
A
C
B
A
C
B
Insert Arrangement
250˚
D
A
C
B
C A
A
C
B
260˚
B
100° Rotation
of 14S-2
250° Rotation
of 14S-2
100° Rotation
of 14S-1
260° Rotation
of 14S-1
14S-7
14S-9**
14S-10
14S-11
14S-12
14S-13
Service Rating
A
A
Inst.
Inst.
A
A
Number of Contacts
3
2
4
4
3
3
Contact Size
16
16
16
16
16
16
F
G
B
D
Insert Arrangement
A
A
E
B
A
D
E
B
C
A
C
B
C
16S-1
16-2*
16S-3*
16S-4*
16-7*
16S-8
Service Rating
A
E
B
D
A
A
Number of Contacts
7
1
1
2
1
2
5
Contact Size
16
12
16
16
8
16
16
* Consult Amphenol, Sidney, NY for availability.
** Inactive for new design
*** Service rating Inst. Class K
CONTACT LEGEND
14
16
12
8
4
0
MS/Standard
contact arrangements
front face of pin insert or rear face of socket insert illustrated
A
C
H
A
A
B
D
B
A
G
A
B
I
B
J
F
C
B
C
Insert Arrangement
E
D
16-9
16-10
16-11
16-12
16-13
18-1
A
A
A
A
A
B, C, F, G = A; Bal. = Inst.
Service Rating
Number of Contacts
2
2
3
2
1
2††
10
Contact Size
12
16
12
12
4
12
16
G
D
F
A
A
C
Insert Arrangement
Service Rating
F
A
C
E
H
E
B
C
B
B
D
C
D
B
G
A
18-4
18-5
18-6*
18-7*
18-8
18-9
D
D
D
B
A
Inst.
Number of Contacts
4
2
1
1
1
1
7
2
5
Contact Size
16
12
16
4
8
12
16
12
16
E
D
A
F
D
D
E
A
A
A
A
C
C
B
C
D
B
B
B
B
A
C
B
C
Insert Arrangement
D
18-10**
18-11
18-12*
18-13
18-14*
Service Rating
A
A
A
A
A
Number of Contacts
4
5
6
1
3
1
1
4††
Contact Size
12
12
16
8
12
4
16
12
100˚
F
E
G
G
250˚
D
A
B
B
E
B
A
100˚
A
C
F
C
18-15*
D
E
F
H
C
C
G
A
H
J
A
Service Rating
J
C
B
E
K
Insert Arrangement
B
I
F
D
A
G
D
100° Rotation
of 18-9
250° Rotation
of 18-9
100° Rotation
of 18-1
18-16*
18-17
18-18
18-19**
18-22**
18-23
C
Inst.
Inst.
A
D
B, C, F, G = A; Bal. = Inst.
Number of Contacts
1
2
5
2
5
10
3
10
Contact Size
12
12
16
12
16
16
16
16
* Consult Amphenol, Sidney, NY for availability.
** Inactive for new design
† one alumel contact and one chromel contact
†† A, C = Iron; B, D = Constantan
CONTACT LEGEND
15
16
12
8
4
0
MS/Standard
contact arrangements
front face of pin insert or rear face of socket insert illustrated
A
100˚
H
A
C
E
B
C
F
250˚
B
C
B
C
D
B
C
E
D
250° Rotation
of 18-1
100° Rotation
of 18-5
250° Rotation
of 18-5
18-24
18-27
18-28
20-2
20-4
20-7
B, C, F, G = A; Bal. = Inst.
D
D
D
D
A, B, G, H = D; C, D, E, F = A
Insert Arrangement
Service Rating
G
H
J
F
A
B
I
250˚
D
A
A
G
Number of Contacts
10
2
1
2
1
1
4
8
Contact Size
16
12
16
12
16
0
12
16
C
E
A
B
F
G
E
F
B
H
F
A
C
E
G
F
E
A
B
D
E
G
D
H
I
B
D
A
E
A
F
D
D
D
C
C
C
A
C
B
B
Insert Arrangement
20-8*
20-9*
20-14
20-15
20-16
Service Rating
Inst.
H = D; Bal. = A
A
A
A
20-17
A
Number of Contacts
2
4
1
7
2
3
7
2
7
5
1
Contact Size
8
16
12
16
8
12
12
12
16
12
16
H
G
I
C
D
G
B
C
F
A
I
E
A
D
B
D
E
B
K
H
N
D
B
G
C
C
20-18
20-19
20-21
20-22
20-24
A
A
A
A
A
Service Rating
J
B
I
C
A
F
H
B
E
Insert Arrangement
A
A
A
F
L
C
D
M
F
E
20-27
A
Number of Contacts
3
6
3
1
8
3
3
2
2
14
Contact Size
12
16
8
12
16
8
16
8
16
16
* Consult Amphenol, Sidney, NY for availability.
CONTACT LEGEND
16
16
12
8
4
0
MS/Standard
contact arrangements
front face of pin insert or rear face of socket insert illustrated
A
B
M
L
K
A
G
T
P
S
R
B
D
F
E
C
F
H
E
260˚
G
F
L
H
D
D
F
A
E
C
D
J
A
B
M
J
H
A
A
K
C
N
C
B
B
B
C
E
D
C
260° Rotation
of 20-7
Insert Arrangement
20-29
20-32
20-33
22-2
22-4**
Service Rating
A
A, B, G, H = D; Bal. = A
A
D
A
Number of Contacts
17
8
11
3
2
2
2
4
Contact Size
16
16
16
8
8
12
12
16
D
A
E
B
B
C
B
C
C
Insert Arrangement
D
A
A
A
22-5
B
A
B
D
22-6**
22-7*
22-9*
22-10*
22-11*
D
E
E
E
B
Service Rating
C
22-12*
D
Number of Contacts
2
1
1
3
4
2
2
3
Contact Size
8
16
0
12
16
16
8
16
L
K
J
M
U
T
H
V
S
A
A
B
N
P
R
A
F
B
C
G
C
C
E
F
H
F
D
B
K
J
B
C
M
P
C
D
N
G
D
E
A
L
H
E
D
F
Insert Arrangement
A
A
J
D
E
G
G
B
H
F
C
B
E
22-14
22-15*
22-17*
22-18*
22-19
Service Rating
A
D = 3; Bal. = A
A = D; Bal. = A
C, D, E = A: Bal. = D
A
Number of Contacts
19
5
1
1
8
8
14
1
2
Contact Size
16
12
16
12
16
16
16
0
16
* Consult Amphenol, Sidney, NY for availability.
** Inactive for new design
CONTACT LEGEND
17
16
12
22-21
A
8
4
0
MS/Standard
contact arrangements
front face of pin insert or rear face of socket insert illustrated
G
D
A
H
H
B
K
J
G
M
L
B
A
F
A
N
F
C
D
D
Insert Arrangement
D
G
260˚
B
C
R
S
H
E
A
E
P
V
T
C
B
B
J
E
C
F
A
U
D
260˚
E
F
C
260° Rotation
of 22-14
260° Rotation
of 22-5
22-32
22-22
22-23
22-27*
22-30
Service Rating
A
H = D; Bal. = A
J = D; Bal. = A
A
Number of Contacts
4
8
1
8
19
2
4
Contact Size
8
12
8
16
16
12
16
A
G
F
C
F
A
B
H
D
B
G
E
A
A
B
F
A
J
B
Service Rating
C
D
N
P
R
S
22-36*
24-1**
24-2
24-4*
H = D; Bal. = A
D
D
D
24-5**
A
Number of Contacts
8
1
1
7
1
3
16
Contact Size
12
0
12
12
0
16
16
A
G
F
H
K
M
C
D
Insert Arrangement
E
G
L
E
B
C
D
D
L
A
K
B
H
P
A
B
F
C
M
E
N
J
B
C
A
G
A
B
D
E
F
E
D
D
E
C
D
Insert Arrangement
Service Rating
I
O
H
E
G
D
C
G
B
I
C
F
H
24-6*
24-7
24-10
24-11
A, G, H = D; Bal. = A
A
A
A
24-12
A
Number of Contacts
8
2
14
7
3
6
2
3
Contact Size
12
12
16
8
8
12
4
12
* Consult Amphenol, Sidney, NY for availability.
** Inactive for new design
CONTACT LEGEND
18
16
12
8
4
0
MS/Standard
contact arrangements
front face of pin insert or rear face of socket insert illustrated
A
100˚
A
B
C
D
H
H
J
E
K
M
L
A
B
H
B
G
E
G
F
A
J
F
K
C
L
G
C
J
F
R
F
D
E
A
C
B
E
D
S
D
C
K
D
N
P
B
G
100° Rotation
of 24-5
Insert Arrangement
24-15
24-16*
24-20
24-21*
24-22
Service Rating
A
A, B, F, G = D; C, D, E = A
D
D
D
Number of Contacts
16
1
3
3
2
9
1
9
4
Contact Size
16
8
12 16
12
16
8
16
8
A
D
F
M
P
E
N
L
R
G
K
B
F
K
H
J
L
E
B
E
G
F
A
A
B
C
C
G
N
M
S
D
H
T
P
E
Q
K
V
U
X
Y
G
S
N
G
Q
P
J
C
V
Z
X
Z
S
250˚
B
J
U
T
A
H
D
H
M
L
W
W
C
F
R
C
D
R
B
A
J
F
D
E
250° Rotation
of 24-5
Insert Arrangement
24-24
24-27*
24-28
24-80*
28-1
Service Rating
A
E
Inst.
Inst.
A, J, E = D; Bal. = A
Number of Contacts
16
7
24
23
3
6
Contact Size
16
16
16
16
8
12
K
A
J
L
P
H
A
S
A
H
A
B
A
B
M
G
C
P
C
D
E
J
M
B
B
F
G
G
N
D
C
E
F
L
E
B
D
F
Insert Arrangement
K
C
C
E
D
28-2
28-3*
28-4*
28-5*
28-8*
D
E
G, P, S = E; Bal. = D
D
L, M = E; B = D; Bal. = A
Service Rating
Number of Contacts
2
12
3
2
7
2
1
2
2
10
Contact Size
12
16
8
12
16
4
12 16
12
16
* Consult Amphenol, Sidney, NY for availability.
CONTACT LEGEND
19
16
12
8
4
0
MS/Standard
contact arrangements
front face of pin insert or rear face of socket insert illustrated
J
H
F
A
K
G
A
B
M
L
P
V
R
G
E
F
J
N
U
B
W
C
A
G
B
H
C
L
S
N
Insert Arrangement
D
D
28-10
28-11
D
G = D, Bal. = A
A
28-12
A
6
2
2
3
4
18
26
Contact Size
12
16
4
8 12
12
16
16
R
A
S
a
N
T
b
Z
M
B
H
C
U
P
D
d
Y
V
W
X
K
R
X
E
L
A
B
C D
E
F G
J
K
L
M
J
C
H
R
Q
D
J
H
K
E
L
A G
F
N
D
P
R
M
P
k
G
m
l
H
M
U
V
h
f
B
B
L
T
S
g
e
j
C
A
W
c
b
a
d
F
G
J
Z
Y
V
U
T
S
K
N
F
G
H
6
P
E
W
X
J
Number of Contacts
100˚
V
L
I
28-9
Service Rating
C
U
d
Y
K
T
C
B
T
b
Z
M
M
D
A
S
a
D
X
E
R
P
E
F
K
F
E
N
100° Rotation
of 28-12
Insert Arrangement
28-13
28-15
28-16**
28-17
Service Rating
A
A
A
R = B; M, N, P = D; Bal. = A
Number of Contacts
26
35
20
15
Contact Size
16
16
16
16
A
L
A
B
M
K
C
B
E
M
E
K
K
P
H
S
C
D
J
G
Insert Arrangement
U
h
n
F
E
28-18*
28-19*
28-20
M = C; G, H, J, K, L = D; A, B = A; Bal. = Inst.
H, M = B; A, B = D; Bal. = A
A
N
k
j
r
m
s
A
4
6
10
4
37
Contact Size
16
12
16
12
16
16
20
Z
f
28-21
12
CONTACT LEGEND
R
X
e
d
p
J
P
W
Number of Contacts
* Consult Amphenol, Sidney, NY for availability.
** Inactive for new design
H
V
c
b
g
D
G
H
M
L
L
M
G
J
F
D
G
F
T
a
E
H
C
A
B
C
N
K
Service Rating
A
J
B
L
16
12
8
4
0
MS/Standard
contact arrangements
front face of pin insert or rear face of socket insert illustrated
B
A
C
A
A
A
F
C
E
E
D
E
F
B
B
B
H
G
E
D
D
J
D
C
C
Insert Arrangement
28-22
32-1
32-2*
D
A = E; B, C, D, E = D
E
Service Rating
32-3*
D
Number of Contacts
3
3
2
3
3
2
1
2
2
Contact Size
4
16
0
12
4
16
0
4
12 16
A
B
G
H
C
E
P
J
L
M
X
d
N
R
h
e
O
U
V
a
g
L
K
C
C
H
D
E
F
U
H
I
J
V
T
K
F
N
O
G
32-7
32-9
A
A, B, h, j = Inst.; Bal. = A
D
32-13
D
Number of Contacts
2
3
2
16
7
28
2
12
5
18
Contact Size
4
8
12 16
12
16
4
16
12
16
A
A
100˚
B
E
D
K
E
B
C
C
H
L
M
I
P
A
D
D
G
J
A
F
E
N
R
O
F
B
S
T
H
U
G
V
C
D
B
C
260˚
X
W
100° Rotation
of 32-6
Insert Arrangement
260° Rotation of
32-1
32-15
32-16
32-17
32-19*
D
A
D
A = E, Bal. = D
Service Rating
D
E
U
H
M
32-6
Service Rating
S
Z
I
L
C
Y
J
D
R
W
G
N
V
Insert Arrangement
B
B
P
X
L
A
G
b
X
B
M
T
f
k
A
K
S
Z
S
T
Y
A
M
E
R
F
j
W
N
J
c
F
I
K
P
W
D
4
Number of Contacts
2
6
2
3
2
16
4
2
3
Contact Size
0
12
4
8
12 16
4
0
12
* Consult Amphenol, Sidney, NY for availability.
CONTACT LEGEND
21
16
12
8
4
0
MS/Standard
contact arrangements
front face of pin insert or rear face of socket insert illustrated
A
A
B
D
E
G
H
L
M
J
P
R
O
c
260˚
W
k
q
p
u
t
s
y
z
16
r
44
42
32
AE
27
28
12
AG
AF
40
11
7
8
29
30
13
6
26
41
31
5
25
39
46
14
4
45
15
C
AC
3
24
38
43
33
AA
AD
X
B
2
23
37
34
v
x
w
AB
D
f
j
n
V
e
h
17
a
d
g
m
W
V
Z
1
22
36
35
R
U
Y
b
S
T
U
T
X
18
P
O
S
N
19
A
M
L
N
E
J
H
K
21
20
E
G
F
F
I
K
B
D
C
C
9
10
260° Rotation
of 32-6
Insert Arrangement
32-20
32-22*
32-63
A
A
D
A
Service Rating
32-73
Number of Contacts
2
3
2
16
54
5
46
Contact Size
4
8
12 16
16
4
16
A
A
A
A
F
B
D
C
E
G
F
F
D
E
B
H
K
O
B
B
E
C
L
P
U
Y
Z
h
d
j
Insert Arrangement
a
36-5
36-6
D
A
A
f
u
s
w
y
z
36-7
A
3
4
2
4
7
40
Contact Size
0
12
0
0
4
12
16
S
A
F
G
N
I
S
W
J
M
K
Y
T
X
U
k
n
s
h
p
t
u
w
v
x
a
R
V
a
Z
d
c
g
L
e
j
f
D
E
F
G
100˚
D
E
J
V
H
J
K
L
M
N
P
P
Q
R
S
T
B
V
W
X
Y
Z
a
F
R
L
X
c
C
K
W
G
d
e
m
f
g
h
p
n
q
j
r
J
P
W
u
w
v
N
y
L
G
M
Q
R
S
N
T
Y
Z
a
U
b
d
f
e
g
p
n
x
u
h
r
q
w
v
k
j
s
x
z
y
z
100° Rotation
of 36-10
Insert Arrangement
36-8
36-9
36-10
A
A
A
A
Service Rating
36-11
Number of Contacts
1
46
1
2
14 14
48
48
Contact Size
12
16
4
8
12 16
16
16
* Consult Amphenol, Sidney, NY for availability.
CONTACT LEGEND
22
c
k
s
t
T
K
X
m
t
F
E
c
b
V
b
B
D
U
O
H
r
C
H
A
O
Y
y
z
B
A
C
I
O
d
e
A
M
U
Z
H
P
O
b
f
m
C
E
m
p
v
3
D
g
k
t
Number of Contacts
B
c
b
e
D
36-3
Service Rating
X
x
C
T
S
W
r
C
N
M
R
V
n
D
J
I
16
12
8
4
0
MS/Standard
contact arrangements
front face of pin insert or rear face of socket insert illustrated
S
A
C
B
D
H
E
J
K
L
M
d
Q
N
P
Q
W
d
R
X
e
f
m
S
Y
n
Z
g
q
u
v
j
r
e
N
D
g
Z
Y
a
M
s
X
L
x
E
W
h
Y
P
d
h
j
c
f
g
k
p m
v
w
X
f
g
t
u
s
y
x
z
z
100° Rotation
of 36-7
110° Rotation
of 36-7
36-17
36-15
36-16
A
M = D, Bal. = A
A
Number of Contacts
48
35
7
40
7
40
Contact Size
16
16
12
16
12
16
A B
C D
S
a
S
M
U
I
O
D
E
J
V
a
A
P
d
e
f
K
W
e
C
f
R
b
G
T
260˚
E
D
V
L
E
J
b
H
c
U
k
F
X
n
v
u
AA
z
R
h
q
i
f
t
s
r
p
N
AE
n
m
w
AF
AE
AD
AJ
36-21
36-52
A
A
A
14 14
1
2
14 14
52
4
52
Contact Size
4
8
12 16
4
8
12 16
16
12
16
D
E
F
F
I
J
K
A
G
N
O
P
R
S
S
D
T
U
Y
V
W
Z
a
H
U
U
B
G
M
R
P
O
F
L
K
S
N
T
X
X
b
AB
B
E
D
J
W
O
J
T
C
N
L
H
M
AC
M
G
A
H
u
A
2
C
k
v
36-66*
1
C
b
l
AH
Number of Contacts
B
c
AF
36-18
A
T
d
x
AK
K
U
e
y
z
AG
AC
V
W
g
D
L
M
X
h
AA
E
N
P
Y
A
F
j
r
x
w
Z
Z
B
G
H
AH
260° Rotation
of 36-9
Service Rating
g
AB
100° Rotation
of 36-9
Insert Arrangement
S
S
Y
p
AD
T
R
f
m
y
G
W
d
t
s
L
X
P
V
c
b
j
C
R
N
a
B
K
W
N
C
J
K
J
a
T
Y
H
F
M
A
A
P
F
L
X
c
B
I
O
d
H
Y
M
U
Z
p
v
w
36-12
Z
m
k
Service Rating
100˚
c
b
r
y
x
W
a
e
j
n
s
H
Z
h
T
S
R
V
d
N
M
U
Y
J
I
L
P
X
110˚
G
H
K
O
S
t
u
T
b
e
n
110° Rotation
of 36-10
Insert Arrangement
N
W
a
r
J
z
R
V
Z
E
F
M
L
B
D
C
J
I
K
F
G
E
G
U
f
b
k
K
y
O
A
D
F
H
V
m
j
c
b
w
k
C
100˚
C
U
a
h
p
t
T
U
c
B
A
B
T
110˚
G
P
O
V
A
R
F
K
P
L
R
W
V
Z
X
Y
V
c
Insert Arrangement
d
e
E
40-1
40-2*
D
D
Service Rating
40-3*
D
Number of Contacts
6
24
23
1
4
18
Contact Size
12
16
16
4
12
16
* Consult Amphenol, Sidney, NY for availability.
CONTACT LEGEND
23
16
12
8
4
0
MS/Standard
contact arrangements
front face of pin insert or rear face of socket insert illustrated
B
A
D
E
H
F
I
J
L
A
M
Q
B
L
J
I
G
K
A
K
C
E
B
C
M
O
N
C
F
P
Z
R
D
G
O
D
H
S
Y
N
N
S
R
O
U
T
P
T
W
E
G
V
H
X
U
V
M
X
L
K
W
Insert Arrangement
F
40-4*
40-5*
D
A
Service Rating
I
J
40-6*
D
Number of Contacts
2
3
2
16
3
2
4
6
1
1
Contact Size
4
8
12 16
0
4
8
12
0
12 16
D
C
G
G
F
K
M
L
N
M
Q
P
B
C
E
J
H
A
B
A
R
V
U
F
H
N
O
U
V
W
b
c
d
D
E
I
J
K
P
Q
R
S
Y
Z
g
h
j
e
f
l
m
T
X
Service Rating
p
q
t
u
J
40-7*
40-9
A
P
i
U
T
V
W
c
Y
b
a
Z
40-10*
A
2
2
18
1
22 24
4
9
16
Contact Size
0
12 16
8
12 16
4
8
16
P
A
A
M
E
B
R
S
Z
b
C
H
D
J
1
K
L
C
P
X
T
D
L
R
Y
h
S
Z
i
j
T
a
U
c
b
k
V
m
W
d
n
f
p
g
q
r
21
41
40
u
v
w
x
y
z
AA
K
AC
AD
AP
AE
W
AR
AS
AH
AF
AT
AJ
AK
AL
AW
AV
AU
AM
AX
60
AB
V
AZ
F
BJ
G
H
BA
BB
BK
BC
BL
BS
BD
BM
BT
BE
BN
BU
BF
BP
56
59
38
AN
37
18
50
BH
BR
30
7
31
8
32
9
34
10
11
15
12
13
40-11*
40-56*
D
A
A
Service Rating
6
33
14
Insert Arrangement
46
29
47
49
16
BV
5
45
48
35
17
4
28
57
58
51
AY
36
X
44
52
E
U
55
53
39
27
43
54
s
3
26
42
19
J
25
22
20
t
Y
2
24
M
23
N
a
B
F
X
S
Number of Contacts
N
Q
O
R
s
P, Q, U, V, W, X = A; Bal. = D
L
N
M
a
H
K
G
I
T
E
D
C
F
n
r
Insert Arrangement
L
o
k
W
A
B
X
S
24
40-62*
Number of Contacts
1
1
1
4
18
85
60
Contact Size
0
4
8
12 16
16
16
* Consult Amphenol, Sidney, NY for availability.
CONTACT LEGEND
24
16
12
8
4
0
MS/Standard
contact information, sealing plugs,
crimping and insertion/removal tools
MS/STANDARD
CRIMP REAR RELEASE CONTACTS
Socket Contacts
Pin Contacts
Wire Range
Contact
Size
AWG
mm2
Military
Part Number
Amphenol/Matrix
Part Number
Military
Part Number
Amphenol/Matrix
Part Number
16S*
20–16
0.5–1.4
M39029/30-217
M5100-033-1601L
M39029/29-212
M5000-029-0016L
16
20–16
0.5–1.4
M39029/30-218
M5100-033-1602L
M39029/29-212
M5000-029-0016L
12
14–12
2–3
M39029/30-219
M5100-033-0012
M39029/29-213
M5000-029-0012
8
10–8†
5–8.5
M39029/30-220
M5100-033-0008
M39029/29-214
M5000-029-0008
4
6–4†
13–21
M39029/30-221
M5100-033-0004
M39029/29-215
M5000-029-0004
0
2–0†
34–60
M39029/30-222
M5100-033-0000
M39029/29-216
M5000-029-0000
* Shorter wire barrel
† Use MS3348 bushing kit to accommodate smaller wire.
Note: For information on thermocouple contacts, consult Amphenol, Sidney, NY.
CONTACT CURRENT RATING AND RETENTION
Current Rating
SEALING PLUGS
Amperes
Max.
lb.
N
16
13
50
25
111.2
12
23
50
30
133.4
8
46
25
50
222.4
4
80
14
60
266.9
0
150
12
75
333.6
Contact
Size**
Sealing Plugs
Contact Retention
Voltage
Crop
Millivolts
Axial Load
Contact
Size
** Organize individual circuits to maintain heat rise within operating
temperature requirements.
Military
Part Number
Amphenol/Matrix
Part Number
16S
MS27488-16-1
10-405996-161
16
MS27488-16-1
10-405996-161
12
MS27488-12-1
10-405996-121
8
MS27488-8-1
10-405996-081
4
MS27488-4-1
10-405996-041
0
MS27488-0-1
10-405996-001
CRIMPING TOOLS
Contact
Size
Wire Range
Finished Wire Dia. Range
Crimping Tool
Part Number
Turret or Positioner
Part Number
AWG
mm2
Inch
mm
16S
20–16
0.5–1.4
.053–.103
1.34–2.62
Red/White
M22520/1-01
M22520/1-02
16
20–16
0.5–1.4
.053–.103
1.34–2.62
Blue/White
M22520/1-01
M22520/1-02
12
14–12
2–3
.085–.158
2.15–4.01
Yell./White
M22520/1-01
M22520/1-02
8
10–8
5–8.5
.132–.255
3.35–6.48
White/Red
M22520/23-01
M22520/23-02
4
6–4
13–21
.237–.370
6.01–9.40
White/Blue
M22520/23-01
M22520/23-04
0
2–0
34–60
.360–.550
9.14–13.97
White/Yell.
M22520/23-01
M22520/23-05
Color Code
INSERTION/REMOVAL TOOLS
Contact
Size
Color Code
Military
Part Number
Amphenol/Matrix
Part Number
16
Blue/White
M81969/14-03
10-538988-016
12
Yell./White
M81969/14-04
10-538988-012
8
White/Red
M81969/14-06
6500-018-0008
4
White/Blue
M81969/14-07
6500-018-0004
0
White/Yell.
M81969/14-08
6500-018-0000
Amphenol installation instructions, L-2106, gives information on insertion, removal and crimping of contacts for
Matrix MIL-DTL-5015 connectors.
25
MS/Standard Accessories
protection caps – plug
PLUG PROTECTION CAP 10-329391-XX*
Assembly
Number
L
10-329391-10
10-329391-11
10-329391-12
10-329391-14
10-329391-16
10-329391-18
10-329391-20
10-329391-22
10-329391-24
10-329391-28
10-329391-32
10-329391-36
10-329391-40
10-329391-44
B
A THD
C
PLUG PROTECTION CAP 10-229125-XX*
Assembly
Number
L
10-229125-10
10-229125-12
10-229125-14
10-229125-16
10-229125-18
10-229125-20
10-229125-22
10-229125-24
10-229125-28
10-229125-32
10-229125-36
10-229125-40
A THD
D
C
PLUG PROTECTION CAP MS25042-XXDA*
MS
Number
L
MS25042-8DA
MS25042-10DA
MS25042-12DA
MS25042-14DA
MS25042-16DA
MS25042-18DA
MS25042-20DA
MS25042-22DA
MS25042-24DA
MS25042-28DA
MS25042-32DA
MS25042-36DA
MS25042-40DA
A THD
C
A
Thread
Class 2A
.625-24UNEF
.625-24UNEF
.750-20UNEF
.875-20UNEF
1.000-20UNEF
1.125-18UNEF
1.250-18UNEF
1.375-18UNEF
1.500-18UNEF
1.750-18UNS
2.000-18UNS
2.250-16UN
2.500-16UN
2.750-16UN
A
Thread
Class 2A
.625-24NEF
.750-20UNEF
.875-20UNEF
1.000-20UNEF
1.125-18NEF
1.250-18NEF
1.375-18NEF
1.500-18NEF
1.750-18NS
2.000-18NS
2.250-16UN
2.500-16UN
A
Thread
Class 2A
.500-28UNEF
.625-24UNEF
.750-20UNEF
.875-20UNEF
1.000-20UNEF
1.125-18UNEF
1.250-18UNEF
1.375-18UNEF
1.500-18UNEF
1.750-18UNS
2.000-18UNS
2.250-16UN
2.500-16UN
B Dia.
+.010
–.000
C
Approx.
L
Max.
.516
.641
.641
.766
.891
1.016
1.141
1.266
1.391
1.641
1.891
2.078
2.328
2.641
3.5
3.5
3.5
3.5
3.5
3.5
4.0
4.0
4.5
4.5
5.0
5.0
5.0
6.0
1.312
1.312
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
C
Approx.
D
Ref.
L
Max.
3.0
3.5
3.5
3.5
3.5
3.5
3.5
4.5
4.5
5.0
5.0
5.0
.140
.140
.140
.140
.140
.193
.193
.193
.193
.193
.193
.193
1.233
1.421
1.421
1.421
1.421
1.421
1.421
1.421
1.421
1.421
1.421
1.421
B Dia.
+.010
–.005
C
Approx.
L
Max.
.156
.156
.156
.156
.156
.156
.187
.187
.187
.187
.218
.218
.218
4.00
4.00
4.50
4.50
4.50
4.50
5.00
5.00
5.50
7.75
7.75
7.75
7.75
.969
.969
1.156
1.156
1.156
1.156
1.156
1.156
1.156
1.156
1.156
1.156
1.156
* Protective caps are illustrated with sash chains and are available with beaded
chains or without chains. Optional terminations are also available. Consult
Amphenol, Sidney, NY when ordering.
D
26
MS/Standard Accessories
protection caps – receptacle
RECEPTACLE PROTECTION CAP 10-329392-XX*
L
B
A THD
D
C
Assembly
Number
A
Thread
Class 2B
B
Dia.
Min.
C
Approx.
D
Dia.
Max.
L
Max.
10-329392-10
10-329392-12
10-329392-14
10-329392-16
10-329392-18
10-329392-20
10-329392-22
10-329392-24
10-329392-28
10-329392-32
10-329392-36
10-329392-40
10-329392-44
.625-24UNEF
.750-20UNEF
.875-20UNEF
1.000-20UNEF
1.125-18UNEF
1.250-18UNEF
1.375-18UNEF
1.500-18UNEF
1.750-18UNS
2.000-18UNS
2.250-16UN
2.500-16UN
2.750-16UN
.516
.641
.766
.891
1.016
1.141
1.266
1.391
1.641
1.891
2.078
2.328
2.641
3.5
3.5
3.5
3.5
3.5
4.0
4.0
4.5
4.5
5.0
5.0
5.0
6.0
.875
1.000
1.125
1.250
1.375
1.500
1.625
1.750
2.000
2.250
2.500
2.656
2.938
.793
.793
.793
.793
1.024
1.024
1.024
1.024
1.024
1.024
1.024
1.024
1.024
Assembly
Number
A
Thread
Class 2B
B
Ref.
C
Approx.
D
Dia.
Max.
L
Max.
10-422905-103
10-422905-123
10-422905-143
10-422905-163
10-422905-183
10-422905-203
10-422905-223
10-422905-243
10-422905-283
10-422905-323
10-422905-363
10-422905-403
.625-24UNEF
.750-20UNEF
.875-20UNEF
1.000-20UNEF
1.125-18UNEF
1.250-18UNEF
1.375-18UNEF
1.500-18UNEF
1.750-18UNS
2.000-18UNS
2.250-16UN
2.500-16UN
.140
.140
.140
.140
.193
.193
.193
.193
.193
.193
.193
.193
3.0
3.5
3.5
3.5
3.5
4.0
4.0
4.5
4.5
5.0
5.0
5.0
.875
1.000
1.125
1.250
1.375
1.500
1.625
1.750
2.000
2.250
2.500
2.656
.812
.812
.812
.812
1.031
1.031
1.031
1.031
1.031
1.031
1.031
1.031
MS
Number
A
Thread
Class 2B
B
+.010
–.005
C
Approx.
D
Dia.
Max.
L
Max.
MS25043-8DA
MS25043-10DA
MS25043-12DA
MS25043-14DA
MS25043-16DA
MS25043-18DA
MS25043-20DA
MS25043-22DA
MS25043-24DA
MS25043-28DA
MS25043-32DA
MS25043-36DA
MS25043-40DA
.500-28UNEF
.625-24UNEF
.750-20UNEF
.875-20UNEF
1.000-20UNEF
1.125-18UNEF
1.250-18UNEF
1.375-18UNEF
1.500-18UNEF
1.750-18UNS
2.000-18UNS
2.250-16UN
2.500-16UN
.140
.140
.140
.140
.140
.140
.140
.140
.171
.171
.187
.187
.187
4.00
4.00
4.50
4.50
4.50
4.50
5.00
5.00
5.50
7.75
7.75
7.75
7.75
.688
.815
1.000
1.125
1.188
1.344
1.469
1.594
1.719
1.969
2.219
2.469
2.719
.750
.750
.750
.750
.750
.750
.750
.750
.750
.812
.812
.812
.812
RECEPTACLE PROTECTION CAP 10-422905-XXX*
L
A THD
B
D
C
RECEPTACLE PROTECTION CAP MS25043-XXDA*
L
A THD
D
C
* Protective caps are illustrated with sash chains and are available with beaded
chains or without chains. Optional terminations are also available. Consult
Amphenol, Sidney, NY when ordering.
B
27
MS/Standard Accessories
dust caps
10-70500 RECEPTACLE DUST CAP
for external threads
C
L1
A
MS
Shell Size
Order
Number
A Dia.
Nominal
Thread
C
Dia.
±.031
L1
±.062
8S
10S
10SL
12S
12
14S
14
16S
16
18
20
22
24
28
32
36
40
10-70500-8
10-70500-10
10-70500-10
10-70500-12
10-70500-12
10-70500-14
10-70500-14
10-70500-16
10-70500-16
10-70500-18
10-70500-20
10-70500-22
10-70500-24
10-70500-28
10-70500-32
10-70500-36
10-70500-40
.500
.625
.625
.750
.750
.875
.875
1.000
1.000
1.125
1.250
1.375
1.500
1.750
2.000
2.250
2.500
.750
.875
.875
1.000
1.000
1.125
1.125
1.250
1.250
1.375
1.500
1.625
1.750
1.938
2.250
2.500
2.750
.500
.500
.500
.500
.500
.500
.500
.500
.500
.562
.562
.562
.562
.562
.562
.625
.625
MS
Shell Size
Order
Number
8S
10S
10SL
12S
12
14S
14
16S
16
18
20
22
24
28
32
36
40
10-70506-8S
10-70506-10S
10-70506-10S
10-70506-12
10-70506-12
10-70506-14
10-70506-14
10-70506-16
10-70506-16
10-70506-18
10-70506-20
10-70506-22
10-70506-24
10-70506-28
10-70506-32
10-70506-36
10-70506-40
10-70506 PLUG DUST CAP
for internal threads
B
L2
28
B
Dia.
Min.
L2
±.125
.469
.587
.587
.704
.704
.828
.828
.953
.953
1.072
1.197
1.322
1.447
1.697
1.947
2.190
2.440
.625
.625
.625
.625
.625
.625
.625
.625
.625
.625
.625
.625
.625
.625
.625
.625
.625
MS/Standard
how to order
HOW TO ORDER BY MILITARY PART NUMBER
MIL-DTL-5015 CONNECTORS
WITH REAR RELEASE CRIMP CONTACTS
MS
1
3456
2
L
3
16S – 8
4
5
P
6
HOW TO ORDER BY PROPRIETARY PART NUMBER
MIL-DTL-5015 CONNECTORS
WITH REAR RELEASE CRIMP CONTACTS
W
7
944
1
6
2
F
3
16S – 8
4
5
P
6
W
7
***
8
1.
Connector Type
MS designates Military Standard
1.
Connector Type
944 designates Amphenol®/Matrix® Series Number
2.
Connector Style
THREADED COUPLING CONNECTORS
3450 wall mounting receptacle
3451 cable connecting receptacle
3452 box mounting receptacle
3454 jam nut receptacle
3456 straight plug
3459 straight plug with self-locking coupling nut
2.
3.
Service Class
L
aluminum shell, electroless nickel finish, fluid resistant insert
W
aluminum shell, cadmium olive drab finish, fluid
resistant insert
LS stainless steel shell, passivated, fluid resistant
insert
KT firewall, steel shell, cadmium olive drab finish, nonflammable hard dielectric and fluid resistant insert
KS firewall, stainless steel shell, passivated, non-flammable hard dielectric and fluid resistant insert
Connector Style
THREADED COUPLING CONNECTORS
9440 wall mounting receptacle
9441 cable connecting receptacle
9442 box mounting receptacle
9444 jam nut receptacle
9446 straight plug
9816 straight plug with self-locking coupling nut
9817 quick disconnect plug with lanyard
9818 quick disconnect plug without lanyard
3.
Service Class
A
aluminum shell, black anodize finish, fluid resistant
insert (not MIL-Spec)
F
aluminum shell, electroless nickel finish, fluid resistant insert
W
aluminum shell, cadmium olive drab finish, fluid
resistant insert
FS stainless steel shell, passivated, fluid resistant
insert
RS fluid resistant insert
KT firewall, steel shell, cadmium/olive drab finish, nonflammable hard dielectric and fluid resistant insert
KS firewall, stainless steel shell, passivated, non-flammable hard dielectric and fluid resistant insert
Note:
Class L inactivates older Class U.
Class K is inactive and has been replaced by Class KT for all
applications.
4., 5. Shell size and insert arrangement - See tables on pages
11 and 12 and pattern drawings that follow.
6.
7.
Contact Types
P designates pin
S designates socket
A designates less pins
B designates less sockets
4., 5. Shell size and insert arrangement - See tables on pages
11 and 12 and pattern drawings that follow.
6.
Contact Types
P designates pin
S designates socket
Note:
Use A & B only when other than a full complement of power contacts is to be installed.
7.
Insert Rotation
“W”, “X”, “Y”, “Z” designate that insert is rotated in its shell
from normal position. No letter required for normal (no
rotation) position. See page 13 for description of alternate
positions.
Insert Rotation
“W”, “X”, “Y”, “Z” designate that insert is rotated in its shell
from normal position. No letter required for normal (no
rotation) position. See page 13 for description of alternate
positions.
8.
Modification Number
Consult Amphenol, Sidney, NY for information.
For strain reliefs use the following modification codes:
(189) E-nut M85049/31 configuration
(190) Straight strain relief M85049/52 configuration
(191) 90° strain relief M85049/51 configuration
29
Additional MS/Standard Connectors
offered by Amphenol
MIL-DTL-5015 and MIL-5015 Type Standard Cylindrical Connectors with solder or crimp (non-rear release) contacts
Amphenol has long been the accepted leader in providing MS/Standard MIL-5015 type connectors. These connectors represent wellproven electrical capability at an economical cost for most equipment
where durability is important.
The MS/Standard family of connectors (3100 Series) is a very broad
range of product with the following features:
•
•
•
•
•
•
MS/Standard 3100 Series, MIL-5015 Type Connectors
•
•
•
•
medium to heavy weight cylindrical with resilient inserts
environmental resistant
threaded couplings, single key/keyway shell polarization
operating voltage to 3000 VAC (RMS) at sea level
5 shell styles, 19 shell sizes, 280 contact arrangements
solder or crimp contacts (non-rear-release type),
sizes 16–0 accepting 22–0 AWG
coaxial or thermocouple contact options
alternate insert positioning
hermetic configurations available
zinc alloy plating (cadmium-free) available
The 3100 Series has five classes of connectors to meet different requirements. Within these connector styles, MIL-C-5015
has been replaced as follows: Environmental classes F and R are updated to and produced in strict accordance to MIL-DTL5015. Classes A, C and E are still produced, but are no longer listed on the qualified products listing (QPL).
Class designations and brief descriptions are as follows:
A–
C–
Solid Shell – for general, non-environmental applications.
Pressurized – for use on pressurized bulkheads or pressure barriers; limits air leakage regardless of type and class of
plug mated with them.
E/F – Environmental Resisting with Strain Relief – designed for applications where the connector will be exposed to moisture, vibration, and rapid changes in pressure and temperature.
R – Lightweight Environmental Resisting – shorter in length, lighter in weight than the E & F classes, the MS-R offers a
high degree of reliability under adverse conditions: recommended for new design applications.
Ask for Amphenol catalog 12-020 which gives detailed information on this family of connectors.
MIL-5015 Modifications
In order to supplement standard MS shell styles and provide a greater variety of styles for the electrical connector user, there
are several MS and MS Modified cylindrical connectors offered by Amphenol. These types include flange mount plugs, thru
bulkhead receptacles, jam nut receptacles, connectors for potting and
connectors designed specifically to terminate jacketed cable.
Ask for Amphenol catalog 12-021 for detailed information.
97 Series, MIL-5015 Type Connectors
The low cost, general duty connector used extensively in the machine tool
industry, welding industry and numerous other industrial applications, is
the Amphenol® 97 Series. Offered in non-environmental styles, these connectors have hard dielectric inserts and threaded coupling. They are
Underwriters Laboratories Recognized and Canadian Standards Association Certified.
Recent addition to this family is the 97E environmental styles, still an economical choice. The 97E can be used in a variety of industrial applications
where environmental sealing is required, such as automotive and robotics.
Ask for Amphenol catalog 12-022 for detailed information.
97 Series, MIL-5015 Type Connectors
30