Frontier Electronics Corp. 667 E. COCHRAN STREET, SIMI VALLEY, CA 93065 TEL: (805) 522-9998 FAX: (805) 522-9989 E-mail: [email protected] Web: http://www.frontierusa.com 1.5A FAST RECOVERY PLASTIC RECTIFIER FR15-005-LFR THRU FR15-10-LFR FEATURES z LOW COST z DIFFUSED JUNCTION z LOW LEAKAGE z LOW FORWARD VOLTAGE DROP z HIGH CURRENT CAPABILITY z FAST SWITCHING z ROHS 1.0(25.4) MIN .034(0.9) .028(0.7) .300(7.6) .230(5.8) MECHANICAL DATA z CASE: JEDEC DO-15 MOLDED PLASTIC, DO15, DIMENSIONS IN INCHES AND (MILLIMETERS) z TERMINAL: AXIAL LEADS, SOLDERABLE PER MIL-STD-202, METHOD 208 z POLARITY: COLOR BAND DENOTES CATHODE z MOUNTING POSITION: ANY z WEIGHT: 0.4 GRAMS .140(3.6) .104(2.6) 1.0(25.4) MIN MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS RATINGS AT 25°C AMBIENT TEMPERATURE UNLESS OTHERWISE SPECIFIED SINGLE PHASE, HALF WAVE, 60 HZ, RESISTIVE OR INDUCTIVE LOAD. FOR CAPACITIVE LOAD, DERATE CURRENT BY 20% FR15-005 FR15-01 FR15-02 FR15-04 FR15-06 FR15-08 FR15-10 UNITS RATINGS SYMBOL -LFR -LFR -LFR -LFR -LFR -LFR -LFR MAXIMUM RECURRENT PEAK REVERSE VOLTAGE VRRM 50 100 200 400 600 800 1000 V MAXIMUM RMS VOLTAGE VRMS 35 70 140 280 420 560 700 V MAXIMUM DC BLOCKING VOLTAGE VDC 50 100 200 400 600 800 1000 V MAXIMUM AVERAGE FORWARD RECTIFIED CURRENT IO 1.5 A 0.375”(9.5mm) LEAD LENGTH AT TA=55°C PEAK FORWARD SURGE CURRENT, 8.3ms SINGLE HALF IFSM 50 A SINE-WAVE SUPERIMPOSED ON RATED LOAD TYPICAL JUNCTION CAPACITANCE (NOTE 1) CJ 25 PF TYPICAL THERMAL RESISTANCE (NOTE 2) Rθja 40 ℃/W STORAGE TEMPERATURE RANGE TSTG -55 TO + 150 ℃ OPERATING TEMPERATURE RANGE TOP -55 TO + 150 ℃ ELECTRICAL CHARACTERISTICS (AT TA =25°C UNLESS OTHERWISE NOTED) FR15-005 FR15-01 FR15-02 FR15-04 FR15-06 FR15-08 FR15-10 UNITS CHARACTERISTICS SYMBOL -LFR -LFR -LFR -LFR -LFR -LFR -LFR MAXIMUM FORWARD VOLTAGE AT IO DC VF 1.3 V 5 μA I R MAXIMUM REVERSE CURRENT AT 25℃ MAXIMUM REVERSE CURRENT AT 100℃ IR FR15-005-LFR THRU FR15-10-LFR μA 50 MAXIMUM REVERSE RECOVERY TIME (NOTE3) TRR 150 NOTE: 1. MEASURED AT 1 MHZ AND APPLIED REVERSE VOLTAGE 0F 4.0 VOLTS 2. BOTH LEADS ATTACHED TO HEAT SINK 20x20x1t(mm) COPPER PLATE AT LEAD LENGTH 5mm 3. REVERSE RECOVERY TEST CONDITIONS: IF=0.5A, IR=1.0A, IRR=0.25A 250 Page: 1 500 nS RATINGS AND CHARACTERISTIC CURVE FR15-005-LFR THRU FR15-10-LFR FIG. 1-TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTIC Fig. 2-MAXIMUM CURRENT DERATING CURVE 10Ω NO INDUCTIVE 1.5 Trr (-) Io-AVERAGE RECTIFIED CURRENT (A) 50Ω NO INDUCTIVE +0.5A D.U.T. (+) 25 Vdc (approx) (-) PULSE GENERATOR ( NOTE 2 ) 1Ω NON INDUCTIVE 0 -0.25A OSCILLOSCOPE ( NOTE 1 ) (+) -1.0A NOTE: 1. RISE TIME=7ns MAX. INPUT IMPEDANCE=1 MOhms 22PF 2. RISE TIME =10ns MAX. SOURCE IMPEDANCE=50 OHMS 1. 0 TJ=25oC .01 20 40 60 80 100 120 140 Fig. 4-MAXIMUM FORWARD SURGE NUMBER OF CYCLES 50 1.0 CYCLE 10 0 1 INSTANTANEOUS FORWARD CURRENT, (A) INSTANTANEOUS FORWARD CURRENT, IF(A) 10 NUMBER OF CYCLES AT 60 HZ 100 FIG. 6-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS Tj=25oC f = 1 MHz Vsig = 50 mVp-p 10 1 10 TA=150oC Pulse Width= 8.3ms 30 FIG. 5-TYPICAL JUNCTION CAPACITANCE 1 20 40 60 80 100 120 140 160 180 200 TA-AMBIENT TEMPERATURE (OC) PERCENT OF RATED PEAK REVERSE 100 0 0 PEAK FORWARD SURGE CURRENT AMPERES INSTANTANEOUS REVERSE CURRENT, MICROAMPERES TJ=100oC 0 0.5 SET TIME BASE FOR 10/20 ns/cm 100 0.1 1.0 1cm FIG. 3-TYPICAL REVERSE CHARACTERISTICS 10 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 100 REVERSE VOLTAGE, VOLTS FR15-005-LFR THRU FR15-10-LFR 20 10 Tj=25oC PULSE WIDTH =300us 1% DUTY CYCLE 3.0 1.0 0.3 0.1 .03 .01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 INSTANTANEOUS FORWARD VOLTAGE, (V) Page: 2 1.8