MABACT0064 Transformer, 4:1 Flux coupled balun transformer 1 to 650 MHz Schematic Features • • • • • • M/A-COM Products Released, Rev. V2 Surface mount 4:1 Impedance ratio Excellent amplitude and phase balance Can be used in both 50Ω and 75Ω systems RoHS* compliant and lead-free Available on tape and reel. Description M/A Com’s MABACT064 is a 4:1 RF flux coupled step up transformer in a low cost, surface mount package. Ideally suited for high volume CATV/ Broadband applications. Case style: SM-138 Pin configuration Pin No. Function 1 Secondary (output 2) 2 Centre Tap (ground) 3 Secondary Dot (output 1) 4 Primary (Ground) 5 Primary Dot (Input) Ordering information Part number Description MABACT0064 2000 piece reel MABA-007948-CT64TB Customer Test Board Dimensions in inches [mm] Tolerance: .xx ± .02, .xxx ± .010, Unless otherwise stated Note: Reference Application Note M513 for reel size information. 1 * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MABACT0064 Transformer, 4:1 Flux coupled balun transformer 1 to 650 MHz M/A-COM Products Released, Rev. V2 Electrical Specifications: TA = 25°C, Z0 = 50Ω Parameter Test Conditions Units Min Typ Max Insertion Loss 10 - 200 MHz 1 - 450 MHz 450 - 650 MHz dB dB dB - 0.7 1.5 3.0 1.0 2.0 3.5 Amplitude Unbalance (Nominal 0dB) 10 - 200 MHz 1 - 650 MHz dB dB - ±0.1 ±0.6 ±0.25 ±1.0 Phase Unbalance (Nominal 180º) 10 - 200 MHz 1 - 500 MHz 500 - 600 MHz º º º - ±1.0 ±3.0 ±7.0 ±2.0 ±5.0 ±10.0 Absolute maximum ratings Recommended PCB Configuration Parameter Absolute maximum Max input power 250mW DC current 200mA Operating Temperature -40°C to +85°C Storage Temperature -55°C to +100°C 1. Exceeding any one or combination of these limits may cause permanent damage to this device. 2. M/A-COM does not recommend sustained operation near these survivability limits. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MABACT0064 Transformer, 4:1 Flux coupled balun transformer 1 to 650 MHz M/A-COM Products Released, Rev. V2 Typical Performance Curves: TA = 25°C, Z0 = 50Ω 3 Insertion Loss 1 (PRI to SEC DOT, pin 5 to pin 3) Insertion Loss 2 (PRI to SEC, pin 5 to pin 1) Amplitude Unbalance Phase Balance ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.