REVISED PER ER7845 C REVISED PER ER21346 JPC B BY APPD DATE CWB DESCRIPTION GGR 01/15/10 2. MATERIAL SPECIFICATIONS: CONNECTOR: BODIES: BRASS PER ASTM B16 RETAINING RING AND CONTACT: COPPER ALLOY INSULATORS: TEFLON PER ASTM D1710 REV CWB 04/24/08 NOTES: UNLESS OTHERWISE SPECIFIED 1. FOR GENERAL SERIES SPECIFICATIONS, SEE SD37-0000. HOUSING HOUSING: HIGH TEMPERATURE THERMOPLASTIC. MATERIAL: SABIC UF0067W-NC (WHITE COLOR) AND CLARIANT CNY02655 COLORANT. CONNECTOR 3. CONNECTOR FINISH SPECIFICATIONS: REAR BODY: .000015 MIN GOLD PER ASTM B488 OVER .000080 MIN NICKEL PER AMS-QQN-290 (RoHS) FRONT BODY AND CONTACTS: .000030 MIN GOLD PER ASTM B488 OVER .000080 MIN NICKEL PER AMS-QQN-290 (RoHS) RETAINING RING: .000005 MIN GOLD PER ASTM B488 OVER .000080 MIN NICKEL PER AMS-QQN-290 (RoHS) .748 19.00 .181 .118 .488 12.38 4.60 3.00 .081 2.05 .004[0.10] A 2X .157 .100 A 4.00 2.54 .100 2.54 .200 5.08 CATALOG P/N: 373-010-6141G PER ASME Y14.5M-1994 UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN INCHES [MM] TOLERANCES: DECIMAL: .XX [X.X] ± .01 [0.3] .XXX [X.XX] ± .005 [0.13] .XXXX [X.XXX] ± .XXXX ANGLES: ± 2° SCALE: 2:1 5X 2X .200 2X .059 1.50 .004[0.10] A 5.08 .046 1.17 .004[0.10] A CUSTOMER DRAWING DRAWN PSM APPROVED R. FAZIO DATE APPROVED 01/15/07 JC DATE APPROVED 11/27/07 M.AYUB DATE 11/27/07 DATE 11/27/07 WinchesterElectronics Winchester Electronics Corporation 62 Barnes Industrial Road North Wallingford, Connecticut 06492 DIN RIGHT ANGLE PLUG 75 OHM WITH HOUSING A SD373-010-6141G SHT 1 OF 1 REV C