3. FINISH SPECIFICATIONS: STAINLESS STEEL PARTS: PASSIVATE CONTACTS: .000100 MIN GOLD PER ASTM B488 OVER .000080 MIN NICKEL PER AMS-QQN-290 (RoHS) CRIMP SLEEVE: .000100 MIN NICKEL PER AMS-QQ-N-290 OVER COPPER FLASH PER ASTM B734 (RoHS) DESCRIPTION A RELEASED PER ER22697 BY APPD DATE WPM 2. MATERIAL SPECIFICATIONS: CONTACTS: COPPER ALLOY CRIMP SLEEVE: PHOS. BRONZE O-RING: SILICONE RUBBER SHEILD GROUND: 303 STAINLESS STEEL PER ASTM A582 REV PSM 04/08/10 NOTES: UNLESS OTHERWISE SPECIFIED 1. INTERFACE COMPLIANT TO SMPTE 304 SPECIFICATION. O-RING 2X CONTACT 2X CONTACT 4. REPLACEMENT KIT FOR ASSEMBLY: 7765-3-3 5. CABLE ASSEMBLY PROCEDURE CAP-E05. SHEILD GROUND CRIMP SLEEVE 2X FERRULE ASSY CARTRIDGE CATALOG P/N: 7760-000-00703Z PER ASME Y14.5M-1994 UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN INCHES [MM] TOLERANCES: DECIMAL: .XX [X.X] ± .01 [0.3] .XXX [X.XX] ± .005 [0.13] .XXXX [X.XXX] ± .XXXX ANGLES: ± 2° SCALE: 2:1 THIRD ANGLE Winchester Electronics Corporation 62 Barnes Industrial Road North Wallingford, Connecticut 06492 CUSTOMER SALES DRAWING DRAWN PSM APPROVED RL DMF026 B DATE APPROVED 03/30/09 WPM DATE APPROVED 08/17/09 JF DATE 08/17/09 DATE 08/17/09 KIT - CONTACT WITH CARTRIDGE A SD7760-000-00703Z SHT 1 OF 1 REV A