SMA Terminations Features n Small Size n Light Weight n Low VSWR n Ideal for Test and Measurement as well as System use Plug Part Number Figure Frequency (GHz) Power (W) Avg. 2001-6151-02 5 1 — — DC - 4.0 1.0 2001-6101-00 1 — — DC - 18.0 1.0 2001-6143-00 1 — — DC - 18.0 2001-6112-00 1 — — 2001-6113-00 1 2002-6113-00 2001-6115-00 13 2001-6110-00 1 1. 2. 3. 4. 5. 6. Jack Figure Part Number VSWR DC - 4 GHz DC - 1 1-4 VSWR VSWR VSWR 4 - 12.4 12.4 - 18 18 - 26.5 GHz GHz GHz — — — 1.05:1 1.15:1 1.20:1 — 1.0 1.09:11 1.17:1 1.23:1 1 — DC - 18.0 0.5 1.05:1 1.15:1 1.20:1 — 2 DC - 18.0 0.5 1.10:1 1.20:1 1.30:1 — — — DC - 18.0 0.5 1.10:1 1.20:1 1.30:1 — — — DC - 26.5 0.5 1.05:1 1.15:1 1.20:1 1.30:1 1.05:1 1.10:1 VSWR based on 1.05 + 0.01 f (GHz) Max. Calibrated termination supplied with data identifying actual VSWR values at 2.0, 4.0, 12.4 and 18 GHz. Finish is gold. With 2” monel bead chain attached to Nickel Plated Brass eyelet with 0.130 I.D. clearance hole end adds to length of device. Power is derated linearly from 3 watts at < 25°C. VSWR based on 1.05:1 + 0.008 f (GHz) Max. Gold plated body with passivated stainless steel coupling nut. Standard finish is gold. For passivated stainless steel, change part number suffix from –00 to –02. Figure 1 Typical Temperature Derating 120 100 Power (%) 2001 Thru 2002 Series V 3.00 80 60 40 20 0 Figure 2 0° 25° 50° 75° 100° 125° Temperature All SMA standard model terminations are 50 ohms and are derated linearly to 10% power at 125°C. Operating temperature range is –54°C to +125°C