S10P45 SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS REVERSE VOLTAGE - 45Volts FORWARD CURRENT - 10.0 Amperes .053(1.35) .041(1.05) TO-277A FEATURES .258(6.55) .246(6.25) .240(6.1) .232(5.9) ●Very low profile - typical height of 1.1 mm ●Ideal for automated placement ●Trench Schottky technology ●Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C ●Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC .084 NOM. (2.13) .187(4.75) .175(4.45) ●High efficiency operation .175(4.45) .163(4.15) .083(2.1) .075(1.9) ● Low forward voltage drop, low power losses MECHANICAL DATA .014(0.35) .006(0.15) ●Case: TO-277A (SMPC) Molding compound meets UL 94 V-0 flammability rating ●Terminals: Matte tin plated leads, solderable per .047(1.2) .039(1.0) J-STD-002 and JESD 22-B102 Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave ,60Hz, resistive or inductive load. For capacitive load, derate current by 20% CHARACTERISTICS Maximum Recurrent Peak Reverse Voltage Maximum DC Forward Current Peak Forward Surge Current 10ms Single Half Sine-Wave Superimposed on Rated Load IF=5.0A Instantaneous Forward voltage IF=10A IF=5.0A IF=10A Reverse Current VR=45V SYMBOL S10P45 UNIT VRRM 45 V IF (1) 10 IF (2) 4.4 180 IFSM VF(3) TA=125℃ TA=125℃ Typical Thermal Resistance IR(4) 0.48(TYP.) 0.57 (MAX.) 0.34(TYP.) Storage Temperature Range V 0.41 (TYP.) 0.50 (MAX.) 21 (TYP.) 800 (MAX.) μA 9 (TYP.) 35 (MAX.) mA (5) 75 (6) 4 RθJA RθJM Operating Temperature Range A 0.42(TYP.) TA=25℃ TA=25℃ A ℃/W TJ -40 to +150 ℃ TSTG -40 to +150 ℃ Notes:(1) Mounted on 30 mm x 30 mm pad areas aluminum PCB (2) Free air, mounted on recommended copper pad area (3)Pulse test: 300 μs pulse width, 1 % duty cycle (4) Pulse test: Pulse width ≤ 40 ms (5) Free air, mounted on recommended copper pad area; thermal resistance R θJA - junction to ambient (6) Mounted on 30 mm x 30 mm aluminum PCB; thermal resistance R θJM - junction to mount REV. 3, 06-Arp-2012 RATING AND CHARACTERTIC CURVES S10P45 FIG.1-TYPICAL TRANSIENT THERMAL IMPEDANCE FIG.2-TYPICAL REVERSE LEAKAGE CHARACTERISTICS 10 Junction to Ambient 10 1 0.01 1 0.1 10 10 t - PULSE DURATION (S) INSTANTANEOUS REVERSE CURRENT (A) TRANSIENT THERMAL IMPEDANCE （℃/W ） 100 TA=150℃ TA=125℃ 10 TA=100℃ 1 0.1 TA=25℃ 0.01 0.001 20 30 40 50 60 70 80 90 100 PERCENT OF RATED PEAK REVERSE VOLTAGE(%) 7 10000 D=0.5 D=0.8 6 JUNCTION CAPACITANCE (pF) AVERAGE POWER LOSS （W ） FIG.4-TYPICAL JUNCTION CAPACITANCE FIG.3-FORWARD POWER LOSS CHARACTERISTICS D=0. D=0.2 5 4 D=0.1 D=1.0 3 2 1 0 0 2 4 6 10 8 1000 TJ=25℃ ，f=1MHZ Vsig=50maV p-p 100 12 0.1 10 1 4 REVERSE VOLTAGE (V) AVERAGE FORWARD CURRENT(A) DC FORWARD CURRENT （A） INSTANTANEOUS FORWARD CURRENT (A) FIG.5-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 100 TA=150 10 TA=125 TA=100 1 TA=25 100 FIG.6-MAXIMUM FORWARD CURRENT DERATING CURVE 12 TM=121℃(1) 10 8 6 TA=25℃(2) 4 2 0 0 2 5 75 100 125 150 175 TM-MOUNT TEMPERATURE 0.1 0 0.1 0.2 0.3 0.4 0.5 INSTANTANEOUS FORWARD VOLTAGE(V) 0.6 0.7 NOTE: (1) Mounted on 30 mm x 30 mm aluminum PCB; TM measured at the terminal of cathode band (RθJM = 4 °C/W) (2) Free air, mounted on recommended copper pad area (RθJA = 75 °C/W) REV. 3, 06-Arp-2012