TOSHIBA TMP86FH92DMG

September 2009
TLCS-870 Family TLCS-870/C Series
8-bit / 30-pin
TMP86FH92DMG
8-bit microcontroller incorporating Flash memory, power-on reset circuit
and voltage detecting circuit in 30-pin SSOP
Features
TLCS-870/C CPU Core
Operating voltage
4.0 to 5.5 V, 2.7 to 5.5 V
Minimum instruction execution time
250 ns (at 16 MHz/ 4.0 to 5.5 V)
500 ns (at 8 MHz/ 2.7 to 5.5 V)
Internal ROM: 16 Kbytes
Internal RAM: 512 bytes
Built-in Functions
10-bit AD converter : 6 channels
UART : 2 channels
I2C : 1 channel
SEI : 1 channel
8-bit timer : 2 channels
16-bit timer : 1 channel
Key-on wake up : 4 channels
Voltage detecting circuit (Two voltage levels detectable,
reset or interrupt selectable)
Power-on reset circuit
* This product uses the SuperFlash® technology under license of Silicon Storage Technology, Inc. Super Flash® is a registered trademark of Silicon Storage
Technology, Inc
Package Information
Pin Assignments
Package name : SSOP30-P-56-0.65
Development Systems
Software Products
C Compiler
Toshiba Integrated Development
Environment
Integrated Development
Environment
SW89CN0-ZCC: 1 license
SW89CN3-ZCC: 10 licenses
SW00MN0-ZCC: 1 license
SW00MN3-ZCC: 10 licenses
The controller and Light emulator comes with a singleseat download license.
Hardware Products Emulator
Controller
RTE870/C model 15 system
BM1040R0A
Interface module
BMP86A100010B
Emulation module
BMP86A200020A
Target connection board BMP86D030MF3A
RTE870/C Light system
Emulation chip
TMP86C993XB**
Light emulator
BMP86A300020A
Emulation chip
TMP86C993XB**
**:Under development
* Select either RTE870/C model 15 system or RTE870/C Light system.
* As to hardware products, additional accessories are also needed.
» For further information about Toshiba microcomputers and Toshiba microcomputer development systems, please visit
http://www.semicon.toshiba.co.jp/eng/product/micro/index.html
Toshiba Corporation, and its subsidiaries and affiliates (collectively "TOSHIBA"), reserve the right to make changes to the information in this document, and related hardware, software and systems (collectively "Product")
without notice.
This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA's written permission, reproduction is permissible only if reproduction is without
alteration/omission.
Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are responsible for complying with safety standards and for providing adequate designs and safeguards
for their hardware, software and systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage to property, including data loss or
corruption. Before creating and producing designs and using, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document, the
specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the instructions for the application that Product will be
used with or for. Customers are solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such design or
applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c)
validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS.
Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring equipment, industrial robots and home electronics appliances) or for specific applications as
expressly stated in this document. Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or reliability and/or a malfunction or failure of which may cause
loss of human life, bodily injury, serious property damage or serious public impact ("Unintended Use"). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used in the aerospace industry,
medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices
related to electric power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this document.
Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable laws or regulations.
The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any infringement of patents or any other intellectual property rights of third parties that may result
from the use of Product. No license to any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE
BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS,
INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED
WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or
biological weapons or missile technology products (mass destruction weapons). Product and related software and technology may be controlled under the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export
Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.
Product may include products subject to foreign exchange and foreign trade control laws.
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product. Please use Product in compliance with all applicable laws and regulations that regulate the
inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of noncompliance with applicable laws and regulations.
In addition to the above, the following are applicable only to development tools.
Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Use the Product in a way which minimizes risk and avoid situations in which a malfunction or failure of Product
could cause loss of human life, bodily injury or damage to property, including data loss or corruption. For using the Product, customers must also refer to and comply with the latest versions of all relevant TOSHIBA information,
including without limitation, this document, the instruction manual, the specifications, the data sheets for Product.
Product is provided solely for the purpose of performing the functional evaluation of a semiconductor product. Please do not use Product for any other purpose, including without limitation, evaluation in high or low temperature
or humidity, and verification of reliability.
Do not incorporate Product into your products or system. Products are for your own use and not for sale, lease or other transfer.