TOSHIBA TLP748JF

TLP748J
TOSHIBA Photocoupler
TENTATIVE
GaAs IRed & Photo-Thyristor
TLP748J
Office Machine
Household Use Equipment
Solid State Relay
Switching Power Supply
Unit in mm
The TOSHIBA TLP748J consists of a photo−thyristor optically coupled
to a gallium arsenide infrared emitting diode in a six lead plastic DIP
package.
•
Peak off−state voltage: 600 V (min.)
•
Trigger LED current: 10 mA (max.)
•
On−state current: 150 mA (max.)
•
UL recognized (scheduled): UL1577, file no. E67349
•
BSI approved (scheduled): BS EN60065
BS EN60950:
•
SEMKO approved (scheduled): SS4330784、
TOSHIBA
SS-EN60950
•
Isolation voltage: 4000 Vrms (min.)
•
Option (D4) type
11−7A8
Weight: 0.42g
VDE approved (scheduled): DIN EN 60747-5-2
Maximum operating insulation voltage: 630 Vpk , 890 Vpk
Highest permissible over voltage: 6000 Vpk , 8000 Vpk
(Note)
•
When a EN 60747-5-2 approved type is needed,
please designate the “option (D4)”
Creepage distance:
Clearance:
Insulation thickness:
7.62 mm pich
standard type
7.0 mm (min.)
10.16 mm pich
(LF2) type
8.0 mm (min.)
7.0 mm (min.)
8.0 mm (min.)
0.5 mm (min.)
0.5 mm (min.)
Pin Configuration (top view)
1
6
2
5
3
4
1 : ANODE
2 : CATHODE
3 : N.C.
4 : CATHODE
5 : ANODE
6 : GATE
HOC-0533
1
2008-12-01
TLP748J
Absolute Maximum Ratings (Ta = 25°C)
Characteristic
Symbol
Rating
Unit
IF
50
mA
∆IF / °C
−0.7
mA / °C
IFP
1
A
LED
Forward current
Forward current derating (Ta ≥ 39°C)
Peak forward current (100 µs pulse, 100 pps)
VR
5
V
Peak forward voltage (RGK = 27 kΩ)
VDRM
600
V
Peak reverse voltage (RGK = 27 kΩ)
VRRM
600
V
On−state current
IT(RMS)
150
mA
On−state current derating (Ta ≥ 25°C)
∆IT / °C
−2.0
mA / °C
ITP
3
A
Peak one cycle surge current
ITSM
2
A
Peak reverse gate voltage
VGM
5
V
Storage temperature range
Tstg
−55~125
°C
Operating temperature range
Topr
−55~100
°C
Lead soldering temperature (10 s)
Tsol
260
°C
Isolation voltage (AC, 1 min., R.H.≤ 60%)
BVS
4000
Vrms
Detector
Reverse voltage
Peak on−state current (100µs pulse, 120 pps)
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Recommended Operating Conditions
Characteristic
Symbol
Min.
Typ.
Max.
Unit
Supply voltage
VAC
―
―
240
Vac
Forward current
IF
15
―
25
mA
Operating temperature
Topr
−25
―
85
°C
Gate to cathode resistance
RGK
―
10
27
kΩ
Gate to cathode capacity
CGK
―
0.01
0.1
µF
Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the
device. Additionally, each item is an independent guideline respectively. In developing designs using this
product, please confirm specified characteristics shown in this document.
HOC-0533
2
2008-12-01
TLP748J
Individual Electrical Characteristics (Ta = 25°C)
Detector
LED
Characteristic
Symbol
Test Condition
Min.
Typ.
Max.
Unit
Forward voltage
VF
IF = 10 mA
1.0
1.15
1.3
V
Reverse current
IR
VR = 5 V
―
―
10
µA
Capacitance
CT
V = 0, f = 1 MHz
―
30
―
pF
Off−state current
IDRM
VAK = 600 V, RGK = 27 kΩ
―
―
5
µA
Reverse current
IRRM
VKA = 600 V, RGK = 27 kΩ
―
―
5
µA
On−state voltage
VTM
ITM = 100 mA
―
―
1.45
V
Holding current
IH
RGK = 27 kΩ
―
―
1
mA
Off−state dv / dt
dv / dt
VAK = 420 V, RGK = 27 kΩ
5
―
―
V/µs
Anode to gate
―
―
―
Gate to cathode
―
―
―
Min.
Typ.
Max.
Unit
Capacitance
Cj
V = 0, f = 1 MHz
pF
Coupled Characteristics (Ta = 25°C)
Characteristic
Symbol
Test Condition
Trigger LED current
IFT
VAK = 6 V, RGK = 27 kΩ
―
―
10
mA
Turn−on time
tON
IF = 30 mA, VAA = 50 V
RGK = 27 kΩ
―
―
―
µs
Capacitance
(input to output)
CS
VS = 0, f = 1 MHz
―
0.8
―
pF
Isolation resistance
RS
VS = 500 V
―
Ω
AC, 1 minute
Isolation voltage
HOC-0533
BVS
12
1×10
10
14
4000
―
―
AC, 1 second, in oil
―
10000
―
DC, 1 minute, in oil
―
10000
―
3
Vrms
Vdc
2008-12-01
TLP748J
RESTRICTIONS ON PRODUCT USE
20070701-EN
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc.
• The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his
document shall be made at the customer’s own risk.
• The products described in this document shall not be used or embedded to any downstream products of which
manufacture, use and/or sale are prohibited under any applicable laws and regulations.
• The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which
may result from its use. No license is granted by implication or otherwise under any patents or other rights of
TOSHIBA or the third parties.
• GaAs(Gallium Arsenide) is used in this product. The dust or vapor is harmful to the human body. Do not break,
cut, crush or dissolve chemically.
• Please use this product in compliance with all applicable laws and regulations that regulate the inclusion or use of
controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance
with applicable laws and regulations.
HOC-0533
4
2008-12-01