IC IC SMD Type Product specification KRF7750 TSSOP-8 Unit: mm Features Ultra Low On-Resistance Dual P-Channel MOSFET Very Small SOIC Package Low Profile ( 1.1mm) Available in Tape & Reel 1,5,8: Drain 2,3,6,7: Source 4: Gate Absolute Maximum Ratings Ta = 25 Parameter Drain- Source Voltage Symbol Rating Unit VDS -20 V Continuous Drain Current, VGS @ -4.5V @ TC = 25 ID 4.7 Continuous Drain Current, VGS @ -4.5V @ TC = 70 ID 3.8 Pulsed Drain Current *1 IDM 38 A Power Dissipation *2 @TC= 25 PD 1.0 W Power Dissipation *2 @TC = 70 PD 0.64 W 0.008 W/ 12 V Linear Derating Factor Gate-to-Source Voltage VGS Junction and Storage Temperature Range Maximum Junction-to-Ambient *2 TJ, TSTG R JA -55 to + 150 125 /W *1 Repetitive rating; pulse width limited by max. junction temperature. *2 When mounted on 1 inch square copper board, t http://www.twtysemi.com 10 sec [email protected] 4008-318-123 1 of 2 IC IC SMD Type Product specification KRF7750 Electrical Characteristics Ta = 25 Parameter Symbol Drain-to-Source Breakdown Voltage V(BR)DSS Breakdown Voltage Temp. Coefficient V(BR)DSS/ Static Drain-to-Source On-Resistance RDS(on) Gate Threshold Voltage Forward Transconductance Drain-to-Source Leakage Current VGS = 0V, ID = -250 A Min V/ 0.030 VGS = -2.5V, ID = -3.8A*1 0.055 gfs VDS = -10V, ID = -4.7A*1 11 -1.2 VDS = -20V, VGS = 0V -1.0 VDS = -16V, VGS = 0V, TJ = 70 -25 VGS = -12V -100 VGS = 12V 100 Qg ID = -4.7A 26 39 Gate-to-Source Charge Qgs VDS = -16V 3.9 5.8 Gate-to-Drain ("Miller") Charge Qgd VGS = -5.0V 8.0 12 Turn-On Delay Time td(on) VDD = -10V 15 ID = -1.0A 54 td(off) RD = 10 180 tr Turn-Off Delay Time Fall Time tf RG = 24 210 Input Capacitance Ciss VGS = 0V 1700 Output Capacitance Coss VDS = -15V 380 Reverse Transfer Capacitance Crss f = 1.0MHz 270 Continuous Source Current Body Diode) V S Total Gate Charge Rise Time Unit V VGS = -4.5V, ID = -4.7A*1 -0.45 Gate-to-Source Reverse Leakage Max 0.012 TJ ID = -1mA,Reference to 25 VDS = VGS, ID = -250 A IGSS Typ -20 VGS(th) IDSS Gate-to-Source Forward Leakage Testconditons A nA nC ns pF IS -1.0 ISM -38 A Pulsed Source Current Body Diode) *2 Diode Forward Voltage VSD Reverse Recovery Time trr TJ = 25 , IF =-1.0A Reverse RecoveryCharge Qrr di/dt = -100A/ *1 Pulse width 300 s; duty cycle -1.2 V 26 39 ns 16 24 nC TJ = 25 , IS = -1.0A, VGS = 0V*1 s*1 2%. *2 Repetitive rating; pulse width limited by max. junction temperature. http://www.twtysemi.com [email protected] 4008-318-123 2 of 2