date 03/29/2012 page 1 of 4 SERIES: MD-XXS │ DESCRIPTION: MINI DIN CONNECTOR FEATURES • PCB mount • right angle • non-shielded RoHS PART NUMBER KEY MD - XX S Base Number Pin Options 30 = 3 pins 40 = 4 pins 50 = 5 pins 60 = 6 pins 70 = 7 pins 80 = 8 pins 90 = 9 pins SPECIFICATIONS parameter conditions/description min rated input voltage rated input current typ max 100 12 at 100 Vac at 12 Vdc contact resistance insulation resistance at 250 Vdc voltage withstand for 1 minute units Vac Vdc 1 2 A A 30 mΩ 250 Vac 50 MΩ insertion force 1 4.5 kg withdrawl force 0.8 3 kg operating temperature -40 life 85 1,000 cui.com °C cycles CUI Inc │ SERIES: MD-XXS │ DESCRIPTION: MINI DIN CONNECTOR date 03/29/2012 │ page 2 of 4 MECHANICAL DRAWINGS units: mm[inches] TOLERANCE: ±0.2mm MATERIAL PLATING earth terminal brass tin contact terminals (1~8) phosphor bronze silver housing PBT 12.4 0.488 14.0 0.551 1.8 0.071 8.0 0.315 8 6 7 5 4 2 3 12.8 0.504 12.3 0.484 1 6.5 0.256 0.3 0.012 (TYP) 3.5 0.138 (TYP) 0.4 0.016 (TYP) 0.75 0.030 (TYP) 0.4 0.016 0.75 0.030 (TYP) 2.0 0.079 10.00 0.394 5.00 0.197 1.50 0.059 (2 PLCS) 4.7 0.185 8.5 0.335 (4 PLCS) 11.0 0.433 (4 PLCS) 5 8 2 7 1 3 4 6 9.10 0.358 (2 PLCS) 1.00 0.039 0.1 (4 PLCS) 0.9 0.035 2.6 0.102 6.8 0.268 (2 PLCS) BOTTOM VIEW MD-30S MD-40S 4 3 2 2 1 MD-50S 5 3 4 3 1 2 1 2.2X0.7 2.2X0.7 2.2X0.7 4.7 0.185 4.7 0.185 8.5 0.335 (2 PLCS) 8.5 0.335 (2 PLCS) 2 1 0.9 0.035 (3 PLCS) +0.1 -0.0 11.0 0.433 3 0.9 0.035 6.8 0.268 PCB LAYOUT TOP VIEW 0.9 0.035 (4 PLCS) +0.1 -0.0 1 2 3 4 11.0 0.433 (2 PLCS) 6.8 0.268 (2 PLCS) PCB LAYOUT TOP VIEW cui.com 4.7 0.185 8.5 0.335 (3 PLCS) 2 0.9 0.035 (5 PLCS) +0.1 -0.0 1 4 3 11.0 0.433 (2 PLCS) 5 1.3 0.051 6.8 0.268 (2 PLCS) PCB LAYOUT TOP VIEW CUI Inc │ SERIES: MD-XXS │ DESCRIPTION: MINI DIN CONNECTOR MD-60S 6 date 03/29/2012 │ page 3 of 4 MD-70S 5 4 2 6 7 3 8 5 4 2 0.9 0.035 (6 PLCS) +0.1 -0.0 4.7 0.185 4.7 0.185 8.5 0.335 (4 PLCS) 8.5 0.335 (4 PLCS) 3 1 2 11.0 0.433 (2 PLCS) 4 5 3 0.9 0.035 (7 PLCS) +0.1 -0.0 6 2.6 0.102 6.8 0.268 (2 PLCS) 5 1 2 6 4 11.0 0.433 (3 PLCS) 3 0.9 0.035 (8 PLCS) +0.1 -0.0 7 0.9 0.035 6 1 4 2 7 11.0 0.433 (4 PLCS) 5 8 0.9 0.035 2.6 0.102 2.6 0.102 PCB LAYOUT TOP VIEW 3 1 2.2X0.7 4.7 0.185 8.5 0.335 (4 PLCS) 6 4 1 2.2X0.7 2.2X0.7 7 5 3 2 1 MD-80S 6.8 0.268 (2 PLCS) 6.8 0.268 (2 PLCS) PCB LAYOUT TOP VIEW PCB LAYOUT TOP VIEW MD-90S 12.5 0.492 14.0 0.551 9 10.6 0.417 7 8 6 12.9 0.508 1.9 0.075 5 4 2 1 3 6.5 0.256 0.2 0.008 3.8 0.150 (TYP) 11.0 0.433 2.2X0.7 5.0 0.197 4.7 0.185 11.0 0.433 (5 PLCS) 4.7 0.185 8.5 0.335 (4 PLCS) 3 7 4 5 8.5 0.335 6 2 1 11.0 0.433 8 0.9 0.035 +0.1 -0.0 (9 PLCS) 6 9 9 1.3 0.051 0.7 0.028 2 8 1 5 3 4 1.0 0.039 0.1 (4 PLCS) 4.0 0.157 8.0 0.315 (2 PLCS) 0.7 0.028 1.3 0.051 4.0 0.157 8.0 0.315 (2 PLCS) PCB LAYOUT TOP VIEW cui.com 7 CUI Inc │ SERIES: MD-XXS │ DESCRIPTION: MINI DIN CONNECTOR date 03/29/2012 │ page 4 of 4 REVISION HISTORY rev. description date 1.0 initial release 02/23/2006 1.01 new template applied 02/16/2012 1.02 housing updates 03/29/2012 The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com [email protected] CUI offers a one (1) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.