Catalog 1308242 Issued 3-03 AGASTAT SST series Industrial Grade Discrete Plug-in Time Delay Relay • • • • • • On-Delay, Off-Delay, Interval, One Shot & Repeat modes Time delays to 120 min. Fast setting with time calibrated knobs. Superior transient protection. Rugged construction with 8- or 11-pin plug. Flame retardant housing. File E15631 File LR33434 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Timing Modes Mechanical Data On-Delay, Off-Delay, Interval, One Shot (Latching Interval) or Repeat Cycle. Mounting/Termination: On-Delay, Interval and Repeat types have 8- pin octal plug that fits either 27E122 or 27E891 socket. Off-Delay and One Shot types have 11-pin octal-type plug that fits 27E123 or 27E892. Sockets must be orderd separately. Weight: 4 oz. (112g) approximately. Timing Specifications Timing Ranges: Nine ranges spanning 0.1 sec. to 120 min. Timing Adjustment: Knob adjust. Accuracy: Repeat Accuracy: ± 1%. Overall Accuracy: ± 5%. Reset Time: 50 ms., max., (25 ms typ.) for on-delay and interval; 300 ms, max., for off-delay and one shot; 500 ms, max., for repeat type. Relay Operate Time: 50 ms. Relay Release Time: 30 ms. Contact Data @ 25°C Arrangements: 2 Form C (DPDT). Rating: 10A @ 120/240VAC, resistive; 1/3 HP @ 120/240VAC, 50/60 Hz. Expected Mechanical Life: 10 million operations. Expected Electrical Life: 500,000 operations, min., at rated resistive load. Ordering Information SST1 – On Delay Types Time Range Part No. Input Time Range Part No. 120 VAC 0.1 - 10 sec. 0.6 - 60 sec. 1.8 - 180 sec. 3 - 300 sec. 18 sec. - 30 min. 36 sec. - 60 min. SST12AAA SST12ACA SST12ADA SST12AEA SST12AGA SST12AHA 120 VDC 0.1 - 10 sec. 1.8 - 180 sec. 3 - 300 sec. 18 sec. - 30 min. 36 sec. - 60 min. SST22AAA SST22ADA SST22AEA SST22AGA SST22AHA 24 VAC 0.1 - 10 sec. 1.8 - 180 sec. 3 - 300 sec. SST12EAA SST12EDA SST12EEA 24 VDC 0.1 - 10 sec. 1.8 - 180 sec. SST22EAA SST22EDA 24 VDC 0.1 - 10 sec. 1.8 - 180 sec. SST22OAA SST22ODA 24 VDC 0.1 - 10 sec. 1.8 - 180 sec. 3 - 300 sec. SST12OAA SST12ODA SST12OEA 12 VDC 0.1 - 10 sec. 1.8 - 180 sec. SST22QAA SST22QDA 12 VDC 0.1 - 10 sec. 1.8 - 180 sec. 3 - 300 sec. SST12QAA SST12QDA SST12QEA Initial Dielectric Strength Between Contacts, Line Inputs and Control Circuits: 1,500V RMS, minimum, at 60 Hz. Input Data @ 25°C Voltage: See Ordering Information section for details. Power Requirement: 3W, max. Transient Protection: Non-repetitive transients of the following magnitudes will not cause spurious operation of affect function and accuracy. Operating Voltage <0.1 ms <1 ms 12 & 24 VAC/VDC 860V 208V* 120 VAC 2,580V 2,150V* * Minimum source impedance of 100 ohm. Environmental Data Temperature Range: Storage: -23°C to +71°C. Operating: -23°C to +54°C. Outline Dimensions 2.0 MAX. (50.8) SQUARE .812 MAX. (20.6) 3.20 MAX. (81.3) 4.60 MAX. (116.8) SST2 – Off Delay Types Input SST4 – One Shot* Types SST3 – Interval Types Input Time Range Part No. Input Time Range Part No. 120 VAC 0.1 - 10 sec. 1.8 - 180 sec. 3 - 300 sec. 36 sec. - 60 min. SST32AAA SST32ADA SST32AEA SST32AHA 120 VDC 24 VAC 0.1 - 10 sec. 1.8 - 180 sec. SST32EAA SST32EDA 0.1 - 10 sec. 1.8 - 180 sec. 3 - 300 sec. 18 sec. - 30 min. 36 sec. - 60 min. SST42AAA SST42ADA SST42AEA SST42AGA SST42AHA 24 VDC 0.1 - 10 sec. 1.8 - 180 sec. SST32OAA SST32ODA 24 VDC 0.1 - 10 sec. 1.8 - 180 sec. SST42EAA SST42EDA 12 VDC 0.1 - 10 sec. 1.8 - 180 sec. SST32QAA SST32QDA 24 VDC 0.1 - 10 sec. 1.8 - 180 sec. SST42OAA SST42ODA 12 VDC 0.1 - 10 sec. 1.8 - 180 sec. SST42QAA SST42QDA SST7 – Repeat Cycle Types Input Time Range Part No. 120 VDC 0.1 - 10 sec. 1.8 - 180 sec. 3 - 300 sec. 18 sec. - 30 min. 36 sec. - 60 min. SST72AAA SST72ADA SST72AEA SST72AGA SST72AHA 24 VDC 0.1 - 10 sec. 1.8 - 180 sec. SST72EAA SST72EDA 24 VDC 0.1 - 10 sec. 1.8 - 180 sec. SST72OAA SST72ODA 12 VDC 0.1 - 10 sec. 1.8 - 180 sec. SST72QAA SST72QDA Wiring Diagrams (Bottom Views) * Also known as Latching Interval Authorized distributors are likely to stock the following: None at present. Dimensions are shown for 1238 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover.