857193 725.5 MHz SAW filter Applications • General purpose wireless • Wireless infrastructure • Base Station Applications SMP-12, 3.00 x 3.00 x 1.22 mm Product Features • • • • • • • • • Usable bandwidth of 45 MHz For wideband applications Low Loss Single-ended operation Matching required for operation at 50Ω Small Size: 3.00 x 3.00 x 1.22 mm Ceramic Surface Mount Package (SMP) Hermetically sealed RoHS compliant (2002/95/EC), Pb-free Functional Block Diagram Gnd 1 6 Gnd Input 2 5 Output Gnd 3 4 Gnd Pb General Description 857193 is a general purpose Uplink filter for Band 28. This filter was specifically designed in a 3x3mm hermetic package for base station applications and is part of our wide portfolio of RF filters in the same package. Pin Configuration – Single Ended EEEnded./Bal-B Pin No. Label 2 Input 5 Output 1.3,4,6 Ground Low insertion loss, coupled with high attenuation and excellent power handling, makes this filter a natural choice for our customers’ Uplink RF filtering needs. Ordering Information Part No. Description 857193 Product description 857193-EVB Evaluation board description Standard T/R size = 5000 units/reel Data Sheet: Rev b 08-20-2013 © 2013 TriQuint - 1 of 6 - Disclaimer: Subject to change without notice 857193 725.5 MHz SAW filter Absolute Maximum Ratings Parameter Rating Storage Temperature (1) RF Input Power 1. Input Power with applied CW signal at +55°C for 25 hours -40 to +85°C +22 dBm Electrical Specifications (1) Specified Temperature Range: Parameter (3) Amplitude Variation (5) Min Typ(4) Max Units - 725.5 2.3 0.8 0.4 4.0 1.0 0.6 MHz dB dB p-p dB p-p 703 – 748 MHz - 0.25 0.3 dB 703 – 748 MHz 703 – 748 MHz - 21 35 deg. p-p - 1.6 2.0 % 44 30 30 20 20 20 45 20 20 - 50 17 20 60 36 25 28 30 60 55 50 1.7 50 30 30 2.0:1 - dBm ns ns p-p dB dB dB dB dB dB dB dB Ohms (6) (7) 703 – 748 MHz Any 3.84 MHz span within 703 – 748 MHz (8) IIP3 Absolute Delay Group Delay Variation Relative Attenuation 703 – 748 MHz Any 5 MHz span within 703 -748 MHz Phase Ripple EVM -30°C to +100°C Conditions Center Frequency Maximum Insertion Loss Temperature Drift (2) (9) (10) Input/Output VSWR (11) Load/Source Impedance Tones 5 MHz separated, power >5 dBm per tone 703 – 748 MHz 703 – 748 MHz 10 – 100 MHz 430 – 480 MHz 480 – 648 MHz 773 – 830 MHz 936 – 971 MHz 1615 – 1660 MHz 1660 – 2690 MHz 3510 – 3800 MHz 703 – 748 MHz single-ended Notes: 1. All specifications are based on the TriQuint schematic shown on page 3 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 4. Typical values are based on average measurements at room temperature 5. Amplitude Variation is defined as the difference between the lowest loss and the highest loss within defined frequency points 6. Temperature Drift specification is defined on Page 3 and is guaranteed by design and will not be measured in production. 7. Measured with a RRC filtered QPSK modulated signal 8. To be measured only during engineering development 9. Relative to the maximum insertion loss 10. 2% tolerance on the matching component values would be needed to achieve this specification 11. This is the optimum impedance in order to achieve the performance shown Data Sheet: Rev b 08-20-2013 © 2013 TriQuint - 2 of 6 - Disclaimer: Subject to change without notice 857193 725.5 MHz SAW filter Temperature Drift Specification Temperature Drift Equations: TempDrift = │ TempDrift = │ Temperature Drift Terms Defined: max(T − T ) − min(T − T ) │ 2 max(T − T ! ) − min(T − T ! ) │ 2 Tambient - Transmission power in dB measured at +25°C. Thot - Transmission power in dB measured at +100°C. T ! - Transmission power in dB measured at -30°C. Temperature Drift - Greater of TempDrift vs TempDrift 857193-EVB Evaluation Board 16nH 16nH 2 L2 XX JJJY M L1 5 C1 50Ω Ω C2 0.4pF 3.6pF Ω 50Ω 1,3,4,6 960700 Notes: 1. Impedance matching required. 2. PCB: .500 x.500 x .063; Construction (5 layer stack-up): ½ oz Cu Top Layer; Dielectric: Taconic TLY-5A (.0075); ½ oz Cu Middle Layer, FR4; ½ oz Cu Bottom Layer; total thickness (0.063) (dimensions are in inches). Contact TriQuint for Gerber files. Bill of Material – 857193-EVB Reference Des. U1 L1, L2 C1 C2 SMA PCB Value N/A 16nH 3.6 pF 0.4 pF N/A N/A Description Manuf. 725.5 MHz SAW filter 0402 chip, series, wire wound, ±3% 0402 chip, ceramic, GRM, ±2% 0402 chip, ceramic, GRM, ±10% SMA connector 3-layer TriQuint Murata Murata Murata Radiall USA Multiple Part Number 857193 LQW15AN16NH00 GRM1555C1H3R6GZ01 GRM1555C1HR40KZ01 9602-1111-018 960700 PCB Mounting Pattern 3.20 SQ Notes: 1. All dimensions are in millimeters. Angles are in degrees. 2. This drawing specifies the mounting pattern used on the TriQuint evaluation board for this product. Some modification may be necessary to suit end user assembly materials and processes. .96 1.70 1.27 .81 .38 Data Sheet: Rev b 08-20-2013 © 2013 TriQuint - 3 of 6 - Disclaimer: Subject to change without notice 857193 725.5 MHz SAW filter Performance Plots - 857193-EVB Test conditions unless otherwise noted: Temp= +25°C Data Sheet: Rev b 08-20-2013 © 2013 TriQuint - 4 of 6 - Disclaimer: Subject to change without notice 857193 725.5 MHz SAW filter Package Information, Marking and Dimensions TriQuint logo Marking code Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 0.5 - 1.0µm, over a 2-6µm Ni plating KK JJJY M ID dot Package Style: SMP-12A Dimensions: 3.00 x 3.00 x 1.22 mm 1.22 NOM. 1.32 MAX. 0.69 All dimensions shown are nominal in millimeters All tolerances are ±0.15mm except overall length and width ±0.10mm The date code consists of day of the current year (Julian, 3 digits), Y = last digit of the year, and M = manufacturing site code 3.00 0.75 1.50 3.00 0.75 Notes: 1. 2. All dimensions shown are typical in millimeters An asterisk (*) in front of the marking code indicates prototype. 0.60 Tape and Reel information Standard T/R size = 5000 units/reel. All dimensions are in millimeters TriQuint logo 12.8 2.7 Ø330 Section A-A 4.0 ID dot 0.21 2.0 Ø1.5 A 1.75 5.5 Ø102 12.0 3.25 Ø20.2 Ø13.0 2.0 Direction of travel 1.4 3.25 4.0 A Ø1.5 Data Sheet: Rev b 08-20-2013 © 2013 TriQuint - 5 of 6 - Disclaimer: Subject to change without notice 857193 725.5 MHz SAW filter Product Compliance Information ESD Sensitivity Ratings Solderability Compatible with both lead-free (260°C maximum reflow temperature) and tin/lead (245°C maximum reflow temperature) soldering processes. Caution! ESD-Sensitive Device Refer to Soldering Profile for recommended guidelines. ESD Rating: Class 1B Value: Passes ≥ 650 V to < 700 V RoHs Compliance Test: Electrostatic Discharge Sensitivity Testing, This part is compliant with EU 2002/95/EC RoHS Human Body Model (HBM) - component level directive (Restrictions on the Use of Certain Standard: ESDA/JEDEC JS-001-2012 Hazardous Substances in Electrical and Electronic Equipment). ESD Rating: Value: Test: Standard: Class B Passes ≥ 300 V to350 V Machine Model (MM) JEDEC Standard JESD22-A115 This product also has the following attributes: • Lead Free • Halogen Free (Chlorine, Bromine) • Antimony Free • TBBP-A (C15H12Br402) Free • PFOS Free • SVHC Free MSL Rating Not applicable. Hermetic package. Contact Information For the latest specifications, additional product information, worldwide sales and distribution locations, and information about TriQuint: Web: www.triquint.com Email: [email protected] Tel: Fax: +1.407.886.8860 +1.407.886.7061 For technical questions and application information: Email: [email protected] Important Notice The information contained herein is believed to be reliable. TriQuint makes no warranties regarding the information contained herein. TriQuint assumes no responsibility or liability whatsoever for any of the information contained herein. TriQuint assumes no responsibility or liability whatsoever for the use of the information contained herein. The information contained herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated with such information is entirely with the user. All information contained herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for TriQuint products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by such information. TriQuint products are not warranted or authorized for use as critical components in medical, life-saving, or lifesustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. Data Sheet: Rev b 08-20-2013 © 2013 TriQuint - 6 of 6 - Disclaimer: Subject to change without notice