SCHRACK General Purpose Relays Low Profile PCB Relay PCD n 1 pole 10 A n 1 NO contact n Low coil power 200 mW n Height 10.2 mm n Wash tight Applications Domestic appliances, coffeee machines, irons, office equipment F0154-D Approvals Z E82292 Technical data of approved types on request Contact data Contact configuration Contact set Type of interruption Rated voltage / max. switching voltage AC Rated current Limiting continuous current Maximum breaking capacity AC Contact material Rated frequency of operation with / without load Operate- / release time Bounce time NO / NC contact Contact ratings Type Contact Load UL 508 PCD-1…D2M(H) PCD-1…D2M(H) NO NO 10 A, 250 VAC, resistive 15 A, 125 VAC, resistive 1 NO single contact micro disconnection 250 / 400 VAC 10 A 10 A 2500 VA AgSnO2, AgCdO 10 / 300 min-1 max 8 / 2 ms max 3 / 2 ms Ambient temp. [°C] Cycles 85°C 23°C 50x103 100x103 Coil data Rated coil voltage range DC coil Operative range to IEC 61810 3 ... 48 VDC 2 Coil versions, DC-coil Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power VDC VDC VDC Ohm mW 006 6 4.5 0.3 180+10% 200 012 12 9.0 0.6 720+10% 200 024 24 18.0 1.2 2880+10% 200 All figures are given for coil without preenergization, at ambient temperature +23°C Other coil voltages on request 1 Datasheet Rev. IJ1 Issued 2009/10 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' section in the catalogue or at schrackrelays.com in the ‘Schrack’ section. Specifications subject to change. SCHRACK General Purpose Relays Low Profile PCB Relay PCD (Continued) Insulation PCB layout / terminal assignment Dielectric strength coil-contact circuit open contact circuit Clearance / creepage coil-contact circuit Material group of insulation parts Insulation to IEC 61810-1 Type of insulation coil-contact circuit open contact circuit Rated insulation voltage Pollution degree Rated voltage system Overvoltage category Bottom view on solder pins 2500 Vrms 750 Vrms W 4/4 mm W IIIa basic micro disconnection 250 V 3 240 V III S0259-AA Other data >10x106 cycles Mechanical endurance Material RoHS - Directive 2002/95/EC compliant per as par product date code "DT" (refers to June 2004), Environment Ambient temperature range -30 ... +70°C Shock resistance (function) NO / NC contact 10 ms Shock resistance (destruction) 100 g Category of protection RT II - flux proof, RT III - wash tight Processing Resistance to soldering heat flux-proof version 270°C / 10 s wash-tight version 260°C / 5 s Relay weight 9g Packaging unit 1000 pcs S0259-AB Dimensions S0287-B Product key Typical product key PCD -1 24 -D 2 M Type PCD Low Profile PCB Relay PCD Number of contacts 1 1 NO contact Coil 5 5 VDC 12 12 VDC Coil version D standard 200 mW Contact material 1 AgCdO Contact configuration M 1 NO contact (1 form A) Version flux proof Other types on request Product key PCD-105-D2M PCD-112-D2M PCD-124-D2M PCD-148-D2M PCD-105-D2MH PCD-112-D2MH PCD-124-D2MH PCD-148-D2MH Version standard 200mW flux proof 6 6 VDC 24 24 VDC 2 AgSnO2 H wash tight Cont. material AgSnO2 Cont.configuration 1 NO contact standard 200mW wash tight Coil 5 VDC 12 VDC 24 VDC 48 VDC 5 VDC 12 VDC 24 VDC 48 VDC Part number 1721105-1 1721105-4 1721105-5 1721105-6 1721105-7 1-1721105-0 1-1721105-1 1-1721105-2 2 Datasheet Rev. IJ1 Issued 2009/10 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' section in the catalogue or at schrackrelays.com in the ‘Schrack’ section. Specifications subject to change.