MS MSD MSDD MST TO-5 HIGH-PERFORMANCE RELAYS ■ ■ ■ MS MSD MSDD MST SENSITIVE TO-5 HIGH-PERFORMANCE RELAY SENSITIVE TO-5 DIODE SUPPRESSED HIGH-PERFORMANCE RELAY SENSITIVE TO-5 DIODE SUPPRESSED/PROTECTED HIGH-PERFORMANCE RELAY SENSITIVE TO-5 DIODE SUPPRESSED/TRANSISTOR DRIVEN HIGH-PERFORMANCE RELAY QUALIFIED TO MIL-R-39016/11 QUALIFIED TO MIL-R-39016/16 QUALIFIED TO MIL-R-39016/21 QUALIFIED TO MIL-R-28776/3 – X1 X2 X2 – + + – X1 X2 X2 X1 A2 B2 A2 B2 A2 B2 A2 A1 B1 A1 B1 A1 B1 A1 A3 B3 A3 TERMINAL VIEW FEATURES ■ ■ Hermetically sealed High shock & vibration ratings ■ Spreader pads ■ Excellent RF switching A3 B3 TERMINAL VIEW CONTACT ARRANGEMENT 2 Form C (DPDT) CONTACT MATERIAL Stationary: Gold/platinum/palladium/silver alloy (gold plated) Moveable: Gold/platinum/palladium/silver alloy (gold plated) B1 B3 FEATURES ■ Suppression & protection diodes ■ Hermetically sealed ■ High shock & vibration ratings ■ Spreader pads ■ Excellent RF switching ELECTRICAL CHARACTERISTICS B2 TERMINAL VIEW FEATURES Suppression diode Hermetically sealed High shock & vibration ratings ■ Spreader pads ■ Excellent RF switching X1 A3 B3 TERMINAL VIEW FEATURES ■ ■ ■ + XB ■ Transistor driver & suppression diode ■ Hermetically sealed ■ High shock & vibration ratings ■ Spreader pads ■ Excellent RF switching CONTACT RATINGS CONTACT LOAD TYPE 1.0 A @ 28 Vdc 250 mA @ 115 Vac, 60 Hz & 400 Hz 100 mA @ 115 Vac, 60 Hz & 400 Hz 0.2 A @ 28 Vdc 0.1 A @ 28 Vdc 30 µA @ 50 mVdc 0.1 A @ 28 Vdc OPERATIONS MIN. Resistive 100,000 Resistive (case not grounded) 100,000 Resistive 100,000 Inductive (0.32 Henry) 100,000 Lamp 100,000 Low Level 1,000,000 Intermediate Current 50,000 CONTACT RESISTANCE Before Life: 100 milliohms max. (measured @ 10 mA @ 6 Vdc) After Life: 200 milliohms max. (measured @ 1 A @ 28 Vdc) MECHANICAL LIFE EXPECTANCY .335 (8.51) DIA MAX .370 (9.40) DIA MAX .031 ± .003 (0.79) .035 (0.89) .375 (9.53) MAX TRANSISTOR BASE CONNECTION (MAT ONLY) 1 million operations COIL VOLTAGE 5 to 48 Vdc TERMINALS W 1.500 MIN (38.1) 36° ± 3° C .500 MIN (12.7) P .187±.010 (4.75±.25) (Length excludes mounting pad) COIL POWER 565 mW max. @ 25°C .200 (5.08) DIA GROUND PIN (OPTIONAL) DUTY CYCLE Continuous PICK-UP VOLTAGE Approximately 50% of nominal coil voltage OPTIONAL PINS .017+.002 (0.43) DIA -.001 .370 (9.40) DIA MAX ENCLOSURE HEADER PICK-UP SENSITIVITY 60 mW max. @ 25°C 12 Tyco Electronics Corporation www.tycoelectronics.com 800-522-6752 (U.S.A.) or 717-564-0100 Specifications subject to change. CII and TYCO are trademarks. ©2003 by Tyco Electronics Corporation OPERATING CHARACTERISTICS ENVIRONMENTAL CHARACTERISTICS SEMICONDUCTOR CHARACTERISTICS TEMPERATURE RANGE DIODE OperateTime: 4.0 ms max. Release Time: MS: 2.0 ms max. MSD/MSDD: 7.5 ms max. (suppression diode, suppression/steering diodes) MST: 7.5 ms max . (transistor driven) -65°C to +125°C 100 Vdc peak inverse voltage (PIV) 1.0 Vdc max. transient voltage WEIGHT 0.12 oz. (3.40 gms) 0.13 oz. (3.45 gms) with spreader pad attached VIBRATION RESISTANCE 30 G’s, 10 to 3,000 Hz SHOCK RESISTANCE 75 G’s, 6 ±1 ms max. CONTACT BOUNCE TRANSISTOR 0.3 Vdc min. base turn off voltage 6.0 Vdc min. emitter-base breakdown voltage (BVEBO) @ 25°C 80.0Vdc min. collector-base breakdown voltage (BVCBO) @ 25°C & IC=100 μA QPL APPROVAL 1.5 ms max MIL-R-39016/11 (JMS) MIL-R-39016/16 (JMSD) MIL-R-39016/21 (JMSDD) MIL-R-28776/3 (JMST) DIELECTRIC WITHSTANDING VOLTAGE Between Open Contacts: 500 Vrms 60 Hz Between Adjacent Contacts: 500 Vrms 60 Hz Between Contacts & Coil: 500 Vrms 60 Hz .103 (2.62) .156 (3.96) .014±.003 (0.36) .370 (9.40) SQ MAX INSULATION RESISTANCE .395 (10.03) SQ MAX .100 (2.54) 0.47 (1.19) DIA .150 (3.81) 10,000 megohms min. @ 500 Vdc 1,000 megohms @ 500 Vdc (coil to case @ +125°C) .100 (2.54) .100 (2.54) .140 – .175 DIA (3.56 – 4.45) S S2 SPREADER & MOUNTING PADS W COIL DATA NOM. COIL VOLTAGE (Vdc) COIL RESISTANCE IN OHMS ±10% @ 25°C (Note 1) COIL CIRCUIT CURRENT mA (MAX.) COIL CIRCUIT CURRENT mA (MIN.) (Note 1&2) (Note 1&2) PICKUP VOLTAGE Vdc (MAX.) @ 25°C (Note 2) BASE TURN ON CURRENT mA (MAX.) @ 25°C PICKUP VOLTAGE Vdc (MAX.) @ 125°C (Note 2) BASE TURN ON CURRENT mA (MAX.) @ 125°C DROP-OUT VOLTAGE Vdc (MIN.) @ 25°C (Note 2) DROP-OUT VOLTAGE Vdc (MIN.) @ -65°C (Note 2) NOM. COIL POWER (mW) @ 25°C MAX. COIL VOLTAGE COIL DESIG. MS/MSD 5.0 100 6.0 200 9.0 400 12.0 850 18.0 1,600 26.5 3,300 36.0 6,500 48.0 11,000 n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a 2.6 3.4 4.85 7.0 9.8 14.0 20.0 25.8 n/a n/a n/a n/a n/a n/a n/a n/a 3.5 4.5 6.8 9.0 13.5 18.0 27.0 36.0 n/a n/a n/a n/a n/a n/a n/a n/a 0.23 0.28 0.55 0.64 0.92 1.4 1.8 2.4 0.12 0.18 0.35 0.41 0.59 0.89 1.25 1.60 250 180 203 169 203 213 199 209 7.5 10.0 15.0 20.0 30.0 40.0 57.0 75.0 5 6 9 12 18 26 36 48 MSDD 5.0 6.0 9.0 12.0 18.0 26.5 36.0 48.0 64 125 400 850 1,600 3,300 6,500 11,000 78.1 48.9 23.6 15.0 12.2 8.8 6.1 4.8 56.8 36.3 18.1 11.7 9.6 7.0 4.9 3.9 2.9 4.0 6.1 7.8 11.3 15.2 21.7 27.8 n/a n/a n/a n/a n/a n/a n/a n/a 3.7 4.8 8.0 11.0 14.5 19.0 27.2 34.8 n/a n/a n/a n/a n/a n/a n/a n/a 0.8 0.9 1.1 1.3 1.5 1.7 2.3 2.8 0.7 0.8 0.9 1.0 1.1 1.3 1.7 2.0 391 288 203 169 203 213 199 209 7.0 10.0 15.0 20.0 30.0 40.0 57.0 75.0 5 6 9 12 18 26 36 48 MST 5.0 6.0 9.0 12.0 18.0 26.5 36.0 48.0 100 200 400 850 1,600 3,300 6,500 11,000 59.3 35.4 25.8 16.7 13.1 9.5 6.4 5.1 43.5 26.4 19.7 12.2 9.7 6.9 4.8 3.7 2.8 3.8 5.2 7.4 10.0 14.2 20.0 25.8 0.37 0.25 0.18 0.12 0.09 0.06 0.034 0.026 3.6 4.8 7.8 11.0 14.5 19.0 27.0 36.0 1.50 1.00 0.75 0.47 0.38 0.24 0.17 0.13 0.22 0.28 0.54 0.63 0.91 1.37 1.80 2.40 0.14 0.18 0.35 0.41 0.59 0.89 1.25 1.60 250 180 203 169 203 213 199 209 7.0 10.0 15.0 20.0 30.0 40.0 57.0 75.0 5 6 9 12 18 26 36 48 TO-5 HIGH-PERFORMANCE RELAYS TIMING Note 1: Coil resistance not directly measurable. Coil current should be within limits shown when tested at nominal voltage at 25°C for 5 seconds max. Note 2: Set base current at 3 mA to 15 mA during measurements. SPECIFYING A PART NUMBER EXAMPLE: TYPE TERMINALS DIODES TRANSISTOR GROUND PINS COILS SPREADER/MOUNTING PADS MS C D G -26 S Tyco Electronics Corporation www.tycoelectronics.com 800-522-6752 (U.S.A.) or 717-564-0100 Specifications subject to change. CII and TYCO are trademarks. ©2003 by Tyco Electronics Corporation 13