MAFA 2100 PA Series DATASHEET | AUGUST 2012 FIBER OPTICS MAFA 2000 Series Erbium Doped Fiber Micro PreAmplifier EMCORE’s MAFA 2100 PA Series Erbium Doped Fiber Preamplifier is an ideal building block for OEM system integrators. The family of MAFA 2100 PA series preamps is designed to meet the most demanding noise performance requirements of any fiber links applications, and performs all the functions required of an optical preamplifier for system integration. MAFA 2100 PA series provide optical isolation on the output of the gain block for stable, low noise operation. The output optical signal power levels are detected for monitoring and control. The MAFA 2100 PA series also provides monitors and associated alarms for all vital characteristics. Applications High Performance Supertrunking Links Optical/Electrical Characteristics1 High Power Distribution Networks Redundant Ring Architectures Property Unit Limit FTTx Networks Model Comments 2114 – PA Features Full Function EDFA gain block (preamp) Operating Input Power Operating Input Power - Pin (dBm) Max -15 Pin (dBm) Min -30 - Po(dBm) Min 13 - Low Noise Figure (Typ < 5.0 dB) Saturated Output Power Total Input Power Range: -30 dBm to 15 dBm +13 dBm Saturated Output Power Operating Wavelength Range Nm Min/Max 1530 – 1562 Nominal Standard RS-232 Communication Noise Figure NF (dB) Typ/Max 5/5.5 (note 2) Power Consumption Psys (W) Max 8 +85 C Case RINout Max -170 db/Hz Input RIN <-175 dB/Hz Key Lock Switch Low Electrical Power Consumption Output Isolation >40 dB Polarization Dependent Gain <0.1 dB Polarization Mode Dispersion <0.5 ps Output RIN o Notes: 1. Unless stated otherwise all specifications apply over the full temperature range and humidity 2. Measured @ 1550 nm, Pin -25 dBm and @ 25OC | REV 2012.08 Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice. MAFA 2100 PA Series FIBER OPTICS DATASHEET | AUGUST 2012 General and Mechanical Specifications Property Requirement Comments Operating Wavelength 1530 nm ~ 1562 nm Standard Operating Case Temperature -40C to 85C Standard Storage Temperature -40C to 85C Standard Operating Humidity 20% to 85% Non-condensing +4.5V to +5.5VDC Standard Voltage Supply Range Optical Connectors Dimensions (in) SC/APC; SC/UPC; FC/APC; FC/UPC; E2000/APC 4.9”W x 5.9”D x 0.8”H User Specified MAFA 2014 -PA Outline Drawing | REV 2012.08 Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice. MAFA 2100 PA Series FIBER OPTICS DATASHEET | AUGUST 2012 Electrical Connector Pinout PIN # Designation PIN # Designation 1 DC Power Input (+5V) 16 Reserved 2 GND 17 Reserved 3 Reserved 18 RS-232 Rx* 4 Reserved 19 Reserved 5 KEY-SWITCH 20 Reserved 6 RS-232Tx 21 Reserved 7 Reserved 22 Reserved 8 Reserved 23 Reserved B 9 Reserved 24 N/A 10 Reserved 25 Reserved 11 Reserved 12 Reserved 13 Reserved 14 DC Power Input (+5V) 15 GND Compliance and Reliability Information FCC: Subpart B. Part 15 class “A”: Unintentional Radiators EN 61000-4-3: Electromagnetic Compatibility (EMC) Part 4: Testing and Measurement Techniques – Section 3: Radiated Immunity (1996) EN 55013: Sound and Television Broadcast receivers and associated equipment – Radio disturbance characteristics- limits and methods of measurements – Electric Field Radiation Emissions (2001) Fit Rate: 60% level of confidence 670 @ 25C Fit Rate: 60% of level of confidence 962 @ 40C Ordering Information MAFA2014 - - PA Connector Option SC - SC/APC FC - FC/APC EC – E2000/APC TC – SC/UPC GC – FC/UPC | REV 2012.08 Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.