PG02S Series 2W DC/DC CONVERTER, SIP-Package FEATURES Efficiency up to 81% SIP Package with Industry Pinout Small Footprint: 21.8 x 9.3 mm (0.86”x 0.37”inch) Wide 2:1 Input Range Operating Temperature Range -40°C to +85°C Isolation Voltage 1000VDC Fully Regulated Output Short circuit protection Lead free, RoHs Compliant 3 Years Product Warranty The PG02S series are miniature, SIP Package, isolated 2W DC/DC converters with 1,000VDC isolation. The PG02S series features fully regulated output and wide 2:1 input voltage ranges. The most convenient advantage is the modules with a small footprint occupying only 2.0 cm2 (0.3 square in.) on the PCB. It offers short circuit protection and allows a wide operating temperature range of –40°C to +85°C. These isolated DC/DC converters are the latest offering from a world leader in power systems technology and manufacturing ― Delta Electronics, Inc Model Selection Guide Model Number PG02S0503A PG02S0505A PG02S0512A PG02S1203A PG02S1205A PG02S1212A PG02S2403A PG02S2405A PG02S2412A PG02S4803A PG02S4805A PG02S4812A Input Voltage (Range) VDC 5 (4.5 ~ 9) 12 (9 ~ 18) 24 (18 ~ 36) 48 (36 ~ 75) DS_PG02S_03152012 Output Voltage VDC 3.3 5 12 3.3 5 12 3.3 5 12 3.3 5 12 Output Current Max. mA 500 400 167 500 400 167 500 400 167 500 400 167 Min. mA 125 100 42 125 100 42 125 100 42 125 100 42 Input Current @Max. Load mA(typ.) 471 548 534 184 217 209 96 109 103 49 57 53 @No Load mA(typ.) Reflected Ripple Current mA(typ.) 40 400 20 300 10 200 8 500 Max.capacitive Load uF 2200 1000 170 2200 1000 170 2200 1000 170 2200 1000 170 Efficiency (typ.) @Max. Load % 70 73 75 73 77 80 72 77 81 71 73 79 E-mail: [email protected] http://www.delta.com.tw/dcdc P1 Input Characteristics Parameter Model 5V Input Models Min. Typ. -0.7 --- Max. 15 12V Input Models -0.7 --- 25 24V Input Models -0.7 --- 50 48V Input Models 5V Input Models 12V Input Models 24V Input Models 48V Input Models 5V Input Models 12V Input Models 24V Input Models 48V Input Models -0.7 3.5 4.5 8 16 ----------- --4 7 12 24 3.5 6.5 11 22 --- 100 --- --- 1500 --- --- 3500 mW Conditions Min. Typ. Max. Unit Vin=Min. to Max. ----- ±1.0 ±0.3 ±2.0 ±0.5 % Line Regulation Load Regulation Io=25% to 100% --- ±0.5 ±0.75 % --- 30 50 mV P-P --- --- 75 mV P-P Input Surge Voltage (1 sec. max.) Start-Up Voltage Under Voltage Shutdown Reverse Polarity Input Current Short Circuit Input Power Input Filter All Models 4.5 9 18 36 4 8.5 17 34 1 Unit VDC A mW Capacitor type Internal Power Dissipation Output Characteristics Parameter Output Voltage Accuracy Ripple & Noise (20MHz) Ripple & Noise (20MHz) Over Line, Load & Temp. % Ripple & Noise (20MHz) --- --- 15 mV rms Transient Recovery Time --- 100 300 uS --- ±3 ±5 % --- ±0.01 ±0.02 %/℃ Transient Response Deviation 25% Load Step Change Temperature Coefficient Short Circuit Protection Continuous General Characteristics Parameter Conditions Min. Typ. Max. Unit 60 Seconds 1000 --- --- VDC I/O Isolation Resistance 500 VDC 1000 --- --- MΩ I/O Isolation Capacitance 100KHz, 1V --- 65 120 pF 100 300 650 KHz 1,000,000 --- --- Hours I/O Isolation Voltage (rated) Switching Frequency MTBF (calculated) MIL-HDBK-217F@25℃, Ground Benign Recommended Outside input Fuse 5V Input Models 12V Input Models 24V Input Models 48V Input Models 1500mA Slow-Blow Type 700mA Slow-Blow Type 350mA Slow-Blow Type 135mA Slow-Blow Type Remote On/Off Control Converter On Parameter Conditions Min. Typ. Max. Under 0.6 VDC or Open Circuit, drops down to 0VDC by 2mV/℃ Converter Off 2.7 to 15 VDC Standby Input Current Control Input Current ( on ) Vin = 0V Control Input Current ( off ) Vin = 5.0V Control Common DS_PG02S_03152012 Unit --- 0.1 0.2 mA --- --- -0.4 mA --- --- 1 mA Referenced to Negative Input E-mail: [email protected] http://www.delta.com.tw/dcdc P2 Environmental Specifications Parameter Conditions Ambient Operating Temperature Range (with Derating) Min. -40 Max. +85 Unit ℃ Case Temperature --- +90 ℃ Storage Temperature Range -55 +105 ℃ Humidity (non condensing) --- 95 % rel. H 260 ℃ Cooling Free-Air convection Lead Temperature (1.5mm from case for 10Sec.) --- Power Derating Curve 100 Natural convection Output Power (%) 80 100LFM 200LFM 60 400LFM 40 20 0 ~ -40 0 20 40 60 80 100 110 Ambient Temperature Notes 1 2 3 4 5 6 Specifications typical at Ta=+25℃, resistive load, nominal input voltage and rated output current unless otherwise noted. Transient recovery time is measured to within 1% error band for a step change in output load of 75% to 100%. Ripple & Noise measurement bandwidth is 0-20 MHz. These power converters require a minimum output loading to maintain specified regulation, operation under no-load conditions will not damage these modules; however, they may not meet all specifications listed. All DC/DC converters should be externally fused at the front end for protection. Specifications subject to change without notice. DS_PG02S_03152012 E-mail: [email protected] http://www.delta.com.tw/dcdc P3 Mechancial Drawing Mechanical Dimensions 11.2 [0.44] 3.2 [0.13] 0.5 [0.02] 21.8 [0.86] 0.5 [0.02] 2.00 [0.08] 2X2.54 [2X0.10] Pin Connections Pin 1 2 3 5 6 7 8 NC: No Connection 3X2.54 [3X0.10] 5.08 [0.20] Function -Vin +Vin Remote On/Off NC +Vout -Vout NC 2 3 5 6 7 8 9.3 [0.37] 1 2.7 [0.11] Bottom View 0.25 [0.01] 20.8 [0.82] ►All dimensions in mm (inches) X.X±0.5 (X.XX±0.02) X.XX±0.25 ( X.XXX±0.01) ►Pins ±0.1(±0.004) ►Tolerance: 0.50 [0.02] Physical Case Size : Case Material Weight : : DS_PG02S_03152012 21.8x9.3x11.2 mm (0.86x0.37x0.44 inches) Non-Conductive Black Plastic (flammability to UL 94V-0 rated) 4.8g E-mail: [email protected] http://www.delta.com.tw/dcdc P4 Part Numbering System P G 02 S 05 05 A Form factor Family series Watt Number of Outputs Input Voltage Output Voltage Option Code D-DIP P-SIP S-SMD A~Z 01:1W 02:2W 03:3W 04:4W 06:6W 03:3.3V 05: 5V 12:12V 24: 24V 48:48V 03:3.3V 05: 5V 12:12V 15: 15V 24: 24V A - Std. Functions S - Single D- Dual WARRANTY Delta offers a three(3) years limited warranty. Complete warranty information is listed on our web site or is available upon request from Delta. Information furnished by Delta is believed to be accurate and reliable. However, no responsibility is assumed by Delta for its use, nor for any infringements of patents or other rights of third parties, which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Delta. Delta reserves the right to revise these specifications at any time, without notice. DS_PG02S_03152012 E-mail: [email protected] http://www.delta.com.tw/dcdc P5