HSL Master Controllers PCI-7853 / PCI-7854 High Speed Link Master Controllers Block Diagram User AP Driver PCI Bus PCI Bus Controller HSL Link Master Slave Scan Controller PCI Bus Controller On-board Memory Parallel to Serial Controller TX Trans/Receiver RX PCI-7853 TXD RXD Features DI Interrupt Function ■ Single/Dual independent network operation ■ Programmable timer interrupt ■ RJ-45 phone jack for easy installation ■ Software selectable transmission speed and mode ■ Supports HSL-HUB3 and HSL-Repeater ■ Timer interrupt ■ DI data transmission interrupt ■ HSL system DI interrupt ■ Any channel of every ID can be set interrupt Event occurred DI interrupt Supported Serial Devices ■ Windows® 7/Vista (32-bit)/XP/2000 libraries ■ Linux Driver for Redhat kernel 2.4.x ■ MotionCreatorPro 2™ ■ HSL LinkMaster Utility ■ RTX Ordering Information ■PCI-7853 Single HSL master controller with two separate connectors ■PCI-7854 Dual HSL master controller with four separate connectors Specifications Model Name Max. Slave Index Support PCI-7854 63 126 Transmission Speed 3/6/12 Mbps (software control) 3/6/12 Mbps (software control) Transmission Mode Half/duplex mode (software control) Half/duplex mode (software control) 300 M at 12 Mbps 300 M at 12 Mbps RJ-45 x 2 RJ-45 x 4 Max. Distance Connection Interface LED Diagnostic Storage Consumption Operating Temperature Storage Temperature Dimensions 7-3 PCI-7853 www.adlinktech.com √ √ +5 V @ 500 MA +5 V @ 500 MA 0˚C to +70˚C 0˚C to +70˚C -20˚C to +80˚C -20˚C to +80˚C 122 mm x 107 mm (L x W) 122 mm x 107 mm (L x W) Updated 03-28, 2012. ©2012 ADLINK Technology, Inc. All Rights Reserved. All specifications are subject to change without further notice.