ACCUTEK AK28PCS-PGA

ACCUTEK
PGA Adapter Modules
MICROCIRCUIT CORPORATION
DESCRIPTION
The Accutek family of PGA Adapter Modules are designed to permit
the soldering of surface mount PLCC, QFP, TQFP, PQFP devices
into a standard PGA through-hole PC board. These PGA Adapter
Modules are a pin compatible drop in replacement for end-of-life
PGA devices. Standard pin counts include 28, 32, 44, 52, 68, 84
and 100 pins. Can accommodate square and rectangular PLCCs
with 0.050” lead pitch and sizes from 0.600” to 1.500”. They also accommodate Quad Flat Packs with 0,5mm and 0,65mm lead pitch.
They feature 0.018” diameter machined pins with integral standoffs.
Plating options are tin, solder or gold pins.
Accutek PGA Adapters were developed for users with motherboard
designs that require PGA’s, now obsoleted by manufacturers.
These adapter modules are designed for soldering directly into a
through-hole PC board and save costly motherboard redesigns.
Accutek PGA Adapter Modules are fully assembled and tested.
They can be manufactured turnkey or from customer supplied surface mount chips.
Custom multi-chip and double sided configurations are also available for special functions.
Features
· Saves costly redesign of current motherboards
· Fully tested with life time limited warranty
· Standard pin counts include 28, 32, 44, 52, 68, 84 and 100
· Tin, solder or gold plated pins available
· 0.018” diameter machined PGA pins with integral standoffs,
custom sizes available
· IC assembly and testing available
· EPROM and Flash programming available
· Custom multi-chip and double-sided modules available
Accutek reserves the right to make changes in specifications at any
time and without notice. Accutek does not assume any responsibility
for the use of any circuitry described; no circuit patent licenses are implied. Preliminary data sheets contain minimum and maximum limits
based upon design objectives, which are subject to change upon full
characterization over the specific operating conditions.
ACCUTEK
MICROCIRCUIT CORPORATION
5 NEW PASTURE ROAD
NEWBURYPORT, MA 01950-4040
PHONE: 978-465-6200 FAX: 978-462-3396
Email: sales@accutekmicro.com
Internet: www.accutekmicro.com
We can provide full turnkey for an adapter or we
can assemble your chips onto our adapter
boards. Fully automated assembly and test is
performed at our Newburyport, Massachusetts
facility.
WE CAN PROVIDE
ALL OF OUR SOCKET
ADAPTERS WITHOUT
A SOCKET AND SOLDER
A PLCC DIRECTLY TO
THE ADAPTER
No job is too large or too small.
AK28PCS-PGA
(with PLCC Socket included)
28 PIN PLCC SOCKET TO PIN GRID ARRAY
AK32PCS-PGA
(with PLCC Socket included)
AK44PCS-PGA
(with PLCC Socket included)
32 PIN PLCC SOCKET TO PIN GRID ARRAY
44 PIN PLCC SOCKET TO PIN GRID ARRAY
0.665"
0.865"
0.665"
0.865"
0.665"
0.765"
TOP VIEW
BOTTOM VIEW
TOP VIEW
PIN #1
BOTTOM VIEW
TOP VIEW
BOTTOM VIEW
0.062"
PIN #1
PIN #1
0.205"
0.062"
0.205"
0.062"
0.100"
0.275"
0.100"
0.205"
0.275"
0.100"
0.275"
PAGE 2 - 10/2012
AK52PCS-PGA
(with PLCC Socket included)
AK68PCS-PGA
(with PLCC Socket included)
52 PIN PLCC SOCKET TO PIN GRID ARRAY
68 PIN PLCC SOCKET TO PIN GRID ARRAY
0.965"
1.165"
0.965"
1.165"
BOTTOM VIEW
TOP VIEW
PIN #1
0.062"
BOTTOM VIEW
TOP VIEW
0.205"
PIN #1
0.062"
0.205"
0.275"
0.100"
0.100"
0.275"
AK84PCS-PGA
(with PLCC Socket included)
84 PIN PLCC SOCKET TO PIN GRID ARRAY
1.365"
1.365"
BOTTOM VIEW
TOP VIEW
PIN #1
0.062"
0.205"
0.100"
0.275"
PAGE 3 - 10/2012