ETC ATC800C220JTN3600XC

ATC 800 C Series
NPO Ceramic
High RF Power
Multilayer Capacitors
• Case C Size
• Capacitance Range:
(.250" x .250") 2.2 pF to 3000 pF
• High Q
• Ultra-Stable Performance
• Low ESR/ESL
• High RF Current/Voltage
• High RF Power • High Reliability
• 3600 WVDC
• RoHS Compliant, Pb free
ATC’s 800 C Series offers superb performance in demanding high
RF power applications requiring consistent and reliable operation.
The combination of highly conductive metal electrode systems,
optimized case geometries, and proprietary dielectrics, yields the
lowest ESR. ATC’s new NPO low loss rugged dielectrics are designed to provide superior heat transfer in high RF power applications. Ultra-low ESR and superior thermal performance insure
that the 800 C Series products are your best choice for high RF
power applications from VHF through microwave frequencies.
Typical functional applications: Bypass, Coupling, Tuning, Impedance
Matching and DC Blocking.
Typical circuit applications: HF/RF Power Amplifiers, Transmitters,
Antenna Tuning, Plasma Chambers and Medical (MRI coils).
ELECTRICAL AND MECHANICAL
SPECIFICATIONS
QUALITY FACTOR (Q):
Greater than 5,000 (2.2 pF to 1000 pF) @ 1 MHz.
Greater than 5,000 (1100 pF to 3000 pF) @ 1 KHz.
TEMPERATURE COEFFICIENT OF CAPACITANCE (TCC):
0 ±30 PPM/°C (-55°C to +125°C)
INSULATION RESISTANCE (IR):
2.2 pF to 3000 pF:
105 Megohms min. @ +25°C at rated WVDC.
104 Megohms min. @ +125°C at rated WVDC.
Max. test voltage is 500 VDC.
WORKING VOLTAGE (WVDC): See Capacitance Values Table, p 2.
DIELECTRIC WITHSTANDING VOLTAGE (DWV):
ATC 800 C Series Capacitors are designed and manufactured to
meet and exceed the requirements of EIA-198, MIL-PRF-55681
and MIL-PRF-123.
250% of WVDC for capacitors rated at 500 volts DC or less for 5 seconds.
150% of WVDC for capacitors rated above 500 volts DC and ≤1250
volts DC for 5 seconds.
120% of WVDC for capacitors rated above 1250 volts DC for 5 seconds.
THERMAL SHOCK:
RETRACE: Less than ±(0.02% or 0.02 pF), whichever is greater.
ENVIRONMENTAL TESTS
MIL-STD-202, Method 107, Condition A.
MOISTURE RESISTANCE:
MIL-STD-202, Method 106.
AGING EFFECTS: None
PIEZOELECTRIC EFFECTS: None
(No capacitance variation with voltage or pressure).
LOW VOLTAGE HUMIDITY:
CAPACITANCE DRIFT: ±(0.02% or 0.02 pF), whichever is greater.
MIL-STD-202, Method 103, Condition A, with 1.5 Volts DC applied while subjected to an environment of 85°C with 85% relative
humidity for 240 hours min.
OPERATING TEMPERATURE RANGE:
LIFE TEST:
TERMINATION STYLES:
MIL-STD-202, Method 108, for 2000 hours, at 125°C.
Voltage applied.
200% of WVDC for capacitors rated at 500 volts DC or less.
120% of WVDC for capacitors rated at 1250 volts DC or less.
100% of WVDC for capacitors rated above 1250 volts DC.
TERMINAL STRENGTH: Terminations for chips withstand a
pull of 10 lbs. min., 20 lbs. typical, for 5 seconds in direction
perpendicular to the termination surface of the capacitor. Test
per MIL-STD-202, method 211.
From -55°C to +125°C (No derating of working voltage).
See Mechanical Configurations, page 3.
ISO 9001
REGISTERED
COMPANY
ATC # 001-1076 Rev. M; 1/14
ATC 800 C Capacitance Values
CAP.
CODE
CAP.
(pF)
2R2
2R4
2R7
3R0
3R3
3R6
3R9
4R3
4R7
5R1
5R6
6R2
6R8
7R5
8R2
9R1
100
110
120
130
150
160
180
200
220
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
11
12
13
15
16
18
20
22
TOL.
RATED
WVDC
CAP.
CODE
CAP.
(pF)
240
270
300
330
360
390
430
470
510
560
620
680
750
820
910
101
111
121
131
151
161
181
201
221
24
27
30
33
36
39
43
47
51
56
62
68
75
82
91
100
110
120
130
150
160
180
200
220
B, C, D
3600
F, G, J, K
RATED
WVDC
TOL.
3600
F, G, J, K
2500
CAP.
CODE
CAP.
(pF)
241
271
301
331
361
391
431
471
511
561
621
681
751
821
911
102
112
122
152
182
222
242
272
302
240
270
300
330
360
390
430
470
510
560
620
680
750
820
910
1000
1100
1200
1500
1800
2200
2400
2700
3000
TOL.
RATED
WVDC
1000
F, G, J, K
600
500
CAPACITANCE TOLERANCE
Code
B
C
D
F
G
K
J
Tol. ±0.1 pF ±0.25 pF ±0.5 pF ±1% ±2% ±5% ±10%
ATC PART NUMBER CODE
ATC800 C 22 0
J
TN 3600 X
C
Series
Packaging
C - ATC Matrix Tray (Standard)
T - Tape and Reel, 500 pc. qty.
I - Special Packaging. Consult Factory
Case Size
Capacitance Code:
First 2 significant digits for capacitance.
R=Decimal Point
Laser Marking
Indicates number of zeros following digits
of capacitance in picofarads except for decimal values.
WVDC
Termination Code
Capacitance Tolerance
The above part number refers to a 800 C Series (case size C) 22 pF capacitor, J tolerance (±5%),
3600 WVDC, with TN termination (RoHS Compliant, Tin Plated over Non-Magnetic Barrier Termination), laser marking and plastic Matrix Tray packaging.
ATC accepts orders for our parts using designations with or without the
“ATC” prefix. Both methods of defining the part number are equivalent,
i.e., part numbers referenced with the “ATC” prefix are interchangeable to
parts referenced without the “ATC” prefix. Customers are free to use either
in specifying or procuring parts from American Technical Ceramics.
A M E R I C A N
ATC North America
sales@atceramics.com
2
For additional information and catalogs contact your ATC
representative or call direct at (+1-631) 622-4700.
Consult factory for additional performance data.
T E C H N I C A L
C E R A M I C S
ATC Europe
saleseur@atceramics.com
ATC Asia
sales@atceramics-asia.com
www.at c er am ic s .c om
ATC 800 C Capacitors: Mechanical Configurations
ATC
SERIES
& CASE
SIZE
CASE SIZE
& TYPE
W/T IS A
TERMINATION SURFACE
Y
800C
T
C
Solderable Barrier
W
L
C
800C
LL
WL
MS
L
Microstrip
C
800C
BODY DIMENSIONS
INCHES (mm)
OUTLINES
ATC
TERM.
CODE
LL
WL
AR
L
Axial Ribbon
LENGTH
(L)
WIDTH
(W)
LEAD AND TERMINATION
DIMENSIONS AND MATERIALS
THICKNESS
(T)
OVERLAP
(Y)
.230
+.025 -.010
(5.84
+0.64
-0.25)
T
RoHS Compliant
Tin Plated over
Nickel Barrier Termination
TL
W
W
High Purity Silver Leads
.250 ±.015 .175 (4.45)
max.
(6.35 ±0.38)
T
TL
MATERIALS
245 ±.025
(6.22 ±0.64)
LL = .500 (12.7) min.
WL = .240 ±.005 (6.10 ±.127)
.040 (1.02) T = .004 ±.001 (.102 ±.025)
L
max.
Leads are Attached with
High Temperature Solder.
Silver Leads
LL = .500 (12.7) min.
WL =
See below
**
T
TL = .004 ±.001 (.102 ±.025)
Custom lead styles and lengths are available; consult factory. All leads are high purity silver attached with high temperature solder and are RoHS compliant.
** WL = .110 (2.79) for capacitance values ≤ 680 pF; WL = .130 (3.30) for capacitance values > 680 pF
ATC 800 C Capacitors: Non-Magnetic Mechanical Configurations
ATC
SERIES
& CASE
SIZE
800C
TN
CASE SIZE
& TYPE
W/T IS A
TERMINATION SURFACE
Y
C
Non-Mag
Solderable Barrier
W
L
C
800C
WL
MN
Non-Mag
Microstrip
LL
L
C
800C
BODY DIMENSIONS
INCHES (mm)
OUTLINES
ATC
TERM.
CODE
WL
AN
Non-Mag
Axial Ribbon
LL
L
LENGTH
(L)
WIDTH
(W)
LEAD AND TERMINATION
DIMENSIONS AND MATERIALS
THICKNESS
(T)
OVERLAP
(Y)
MATERIALS
.230
+.025 -.010
(5.84
+0.64
-0.25)
T
RoHS Compliant
Tin Plated over
Non-Magnetic Barrier
Termination
High Purity Silver Leads
TL
W
245 ±.025
(6.22 ±0.64) .250 ±.015 .175 (4.45)
max.
(6.35 ±0.38)
T
LL = .500 (12.7) min.
WL = .240 ±.005 (6.10 ±.127)
.040 (1.02) T = .004 ±.001 (.102 ±.025)
L
max.
Leads are Attached with
High Temperature Solder.
TL
W
Silver Leads
LL = .500 (12.7) min.
WL =
See below
245 ±.025
(6.22 ±0.64)
T
**
TL = .004 ±.001 (.102 ±.025)
Custom lead styles and lengths are available; consult factory. All leads are high purity silver attached with high temperature solder and are RoHS compliant.
** WL = .110 (2.79) for capacitance values ≤ 680 pF; WL = .130 (3.30) for capacitance values > 680 pF
A M E R I C A N
ATC North America
sales@atceramics.com
T E C H N I C A L
C E R A M I C S
ATC Europe
saleseur@atceramics.com
ATC Asia
sales@atceramics-asia.com
www.at c er am ic s .c om
3
Suggested Mounting Pad Dimensions
ATC 800 C Performance Data
800 C ESR vs. Frequency
100
ESR (MilliOhms)
8.2 pF
10 pF
18 pF
39 pF
220 pF
910 pF
2700 pF
3000 pF
1
10
100
1000
Frequency (MHz)
A M E R I C A N
ATC North America
sales@atceramics.com
4
T E C H N I C A L
C E R A M I C S
ATC Europe
saleseur@atceramics.com
ATC Asia
sales@atceramics-asia.com
www.at c er am ic s .c om
ATC 800 C Performance Data
800 C Current Rating vs. Capacitance
RMS Current (amps)
100
The current is based on a 65°C mounting surface
and a device thermal resistance of 15°C/W. A
power dissipation of 4 W will result in a case
temperature of 125°C.
10
150 MHz
10 MHz
30 MHz
1
Dotted line = Power dissipation limit
Solid line = Voltage limit (Vms/Xc)
(Typical)
0.1
1
100
10
10000
1000
Capacitance (pF)
800C Capacitance Change vs. Temperature
1
TCC= 0 ±30 PPM/°C
0.8
0.6
% Change in Capacitance
0.4
0.2
0
-0.2
-0.4
-0.6
-0.8
-1
-55
-35
-15
5
25
45
65
85
105
125
Temperature (Degrees °C)
Sales of ATC products are subject to the terms and conditions contained in American Technical Ceramics Corp. Terms and Conditions of Sale (ATC document #001-992 Rev. B; 12/05). Copies of these
terms and conditions will be provided upon request. They may also be viewed on ATC's website at www.atceramics.com/productfinder/default.asp. Click on the link for Terms and Conditions of Sale.
ATC has made every effort to have this information as accurate as possible. However, no responsibility is assumed by ATC for its use, nor for any infringements of rights of third parties which
may result from its use. ATC reserves the right to revise the content or modify its product without prior notice.
© 2006 American Technical Ceramics Corp. All Rights Reserved.
A M E R I C A N
ATC North America
sales@atceramics.com
ATC # 001-1076 Rev. M, 1/14
T E C H N I C A L
C E R A M I C S
ATC Europe
saleseur@atceramics.com
ATC Asia
sales@atceramics-asia.com
www.at c er am ic s .c om
5