Product Data Sheet t-Global Part No. LP0002/01-PC99-0.06 Digi-Key Part No. 1168-1720-ND Description Thermal interface phase change material Manufacturer t-Global Technology [LP][PCB type]/[##]-[ XXX ]-[T]-[#A]-[P] Part Number scheme Typical application Material code Thickness Surface characteristic [LP][ PCB type]/ ## XXX T #A P Die-Cut for PCB type: LP0002 Variant: 01 T-Global thermal interface pad material: PC99 Thickness 0.06mm Adhesive 1A – one side 2A –two sides Pull tab Thermal interface pad for LED board PC99 Unit 0.06 mm Thermal pad dimensions (mm) Tacky Low thermal resistance Natural tack Features Phase change softening point 52 ˚C Thermal conductivity 1.5 W/m.K -30 to 125 ˚C Specific gravity 2.35 g/cm3 Surface resistance › 1012 Ohm - cm Thermal resistance 30 psi 0.1 ˚C /W Tensile strength 0.1 Kgf/cm2 UL Flammability V-0 (method UL 94) Operating temperature range Elongation 5 % Yellow Colour Recommendations: Revision of these specifications is carried out after consent. We reserve the right to make changes without notification. Tel: +44 20 8133 2062 Email: [email protected] Web: www.tglobaltechnology.com Skype: tglobal.technology