FL07-0002-G Low Cost SMT Low Pass Filter DC – 2000 MHz Rev. V2 Features • • • • • • Functional Block Diagram Small Size and Low Profile Superior Repeatability Typical Insertion Loss 0.6 dB Typical Rejection 20 dB 2 Watt Power Handling SOIC-8 Package Description M/A-COM’s FL07-0002-G is an IC-based monolithic low pass filter in a low cost SOIC-8 plastic package. The filter is ideally suited for applications where small size, low cost and low loss are required. Typical applications include base station switching networks and portable phones where size and PCB real estate are at a premium. Available in tape and reel. The FL07-0002-G is fabricated using a passiveintegrated circuit process. The process features fullchip passivation for increased performance and reliability. 1. 2. Ordering Information All unused pins must be RF and DC grounded. Pins 1 and 4 are thermal ground contacts. Part Number Package FL07-0002-G Bulk Packaging FL07-0002-G-TR 1000 piece reel Pin No. Function Pin No. Function FL07-0002-GSAM Sample Test Board 1 GND 5 GND 2 RF IN 6 GND 3 GND 7 RF OUT 4 GND 8 GND Note: Reference Application Note M513 for reel size information. Pin Configuration 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. FL07-0002-G Low Cost SMT Low Pass Filter DC – 2000 MHz Rev. V2 Electrical Specifications: TA = 25°C, Z0 = 50Ω Parameter Units Min Typ Max Insertion Loss: DC – 2000 MHz dB — 0.6 1.0 VSWR: DC – 2000 MHz — — 1.6:1 2.0:1 Rejection: 3500 – 4000 MHz 4000 – 6000 MHz dB dB 15 20 20 30 — — Absolute Maximum Ratings 3,4 3. 4. Parameter Absolute Maximum Input Power 2 W CW Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C Exceeding any one or combination of these limits may cause permanent damage to this device. M/A-COM does not recommend sustained operation near these survivability limits. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity GMIC Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. Typical Performance Curves Insertion Loss vs. Frequency VSWR vs. Frequency 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. FL07-0002-G Low Cost SMT Low Pass Filter DC – 2000 MHz Rev. V2 SOIC-8† † Reference Application Note M538 for lead-free solder reflow recommendations. 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.