1SS226 SURFACE MOUNT SWITCHING DIODE VOLTAGE 80 Volts Power 150 mW FEATURES • Ultra high speed • Low Forward Voltage • Small total capacitance • Lead free in comply with EU RoHS 2002/95/EC directives. • Green molding compound as per IEC61249 Std. . (Halogen Free) MECHANICAL DATA Case : SOT-23, Plastic Terminals : Solderable per MIL-STD-750, Method 2026 Weight : 0.0003 ounces, 0.0084 grams Polarity:Color band denotes cathode end Marking : A7 o MAXIMUM RATINGS (T A=25 C unless otherwise noted) PARAMETER SYMBOL VALUE UNIT Maximum Recurrent Peak Reverse Voltage VRRM 80 V Maximum RMS Voltage VRMS 56 V VR 80 V Average Rectified Output Current I F(AV) 100 mA Peak forward Surge Current : 8.3ms single half sine-wave superimposed on rated load (JEDEC method) I FSM 2 A PD 150 mW Maximum DC Blocking Voltage Maximum Power Dissipation Typical Thermal Resistance, Junction to Case Operating Junction Temperature and Storage Temperature range (Notes 1) RJC TJ,TSTG o 220 -55 to + 125 C/W o C Note s : 1.Mounted on an FR4 PCB, single-sided copper, with 48cm 2 copper pad area. May 16,2012-REV.00 PAGE . 1 1SS226 ELECTRICAL CHARACTERISTICS (TA=25 C unless otherwise noted) PARAMETER SYMBOL Breakdown voltage Instantaneous forward voltage Reverse current TEST CONDITIONS VBR I R=100A VF I F=1mA I F=10mA I F=100mA I F=1mA I F=10mA I F=100mA TA=25oC TA=25oC TA=125oC MIN. TYP. MAX. UNIT 80 - - V - 0.60 0.71 0.92 0.40 0.55 0.79 1.2 - V V VR=30V TA=25oC - - 0.1 A VR=80V TA=25oC - - 0.5 A - 0.9 3.0 pF IR Total capacitance CJ VR=0V,f=1MHz RATING AND CHARACTERISTIC CURVES 100 80 60 40 20 0 0 25 50 75 100 125 150 TC, Case Temperature (°C) 10 CJ, Junction Capacitance (pF) IF, Forward Current (mA) 120 1 0 0.1 10 1 TJ = 100°C 0.1 0.01 TJ = 75°C TJ = 25°C 0.001 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Fig.3 Typical Reverse Characteristics May 16,2012-REV.00 100 Fig.2 Typical Junction Capacitance IF, Forward Current (mA) IR, Reverse Current (μA) TJ = 125°C 100 10 VR, Reverse Bias Voltage (V) Fig.1 Forward Current Derating Curve 1000 1 1000 TJ = 125°C 100 TJ = 100°C 10 TJ = 75°C 1 TJ = 25°C 0.1 0.2 0.4 0.6 0.8 1 1.2 VF, Forward Voltage (V) Fig.4 Typical Forward Characteristics PAGE . 2 1SS226 MOUNTING PAD LAYOUT SOT-23 0.035 MIN. (0.90) MIN. Unit：inch(mm) 0.078 (2.00) 0.037 (0.95) 0.043 (1.10) 0.031 MIN. (0.80) MIN. 0.043 (1.10) 0.106 (2.70) ORDER INFORMATION • Packing information T/R - 12K per 13" plastic Reel T/R - 3K per 7” plastic Reel May 16,2012-REV.00 PAGE . 3 1SS226 Part No_packing code_Version 66_R1_00001 66_R2_00001 For example : RB500V-40_R2_00001 Serial number Version code means HF Packing size code means 13" Packing type means T/R Part No. Packing Code XX Packing type Tape and Ammunition Box (T/B) Tape and Reel (T/R) Bulk Packing (B/P) Tube Packing (T/P) Tape and Reel (Right Oriented) (TRR) Tape and Reel (Left Oriented) (TRL) FORMING May 16,2012-REV.00 Version Code XXXXX 1st Code Packing size code A N/A 0 HF 0 serial number R 7" 1 RoHS 1 serial number B 13" 2 T 26mm X S 52mm Y L F PANASERT T/B CATHODE UP (PBCU) PANASERT T/B CATHODE DOWN (PBCD) 2nd Code HF or RoHS 1st Code 2nd~5th Code U D PAGE . 4 1SS226 Disclaimer z Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. z Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. z Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. z Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. z Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. z The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. May 16,2012-REV.00 PAGE . 5