TOSHIBA 2SC6126

2SC6126
TOSHIBA Transistor Silicon NPN Epitaxial Type
2SC6126
High-Speed Switching Applications
Unit : mm
DC-DC Converter Applications
LCD Backlighting Applications
•
High DC current gain: hFE = 250 to 400 (IC= 0.3 A)
•
Low collector-emitter saturation: VCE(sat) = 0.18 V (max)
•
High-speed switching: tf = 40 ns (typ.)
Absolute Maximum Ratings (Ta = 25°C)
Characteristic
Symbol
Rating
Unit
VCBO
120
V
VCEX
120
V
VCEO
50
V
VEBO
6
V
DC
IC
3
Pulse
ICP
5
IB
1.5
Collector-base voltage
Collector-emitter voltage
Emitter-base voltage
Collector current (Note1)
Base current
Collector power
dissipation
Junction temperature
Storage temperature range
DC
t = 10 s
JEDEC
―
A
JEITA
SC-62
A
TOSHIBA
2-5K1A
PC
1.0
(Note2)
2.5
Tj
150
°C
Tstg
−55 to 150
°C
W
Weight: 0.05 g (typ.)
Note 1: Please use devices on condition that the junction temperature is below 150℃.
Note 2: Mounted on FR4 board (glass epoxy, 1.6 mm thick, Cu area: 645 mm2)
Note 3: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test report
and estimated failure rate, etc).
1
2009-07-07
2SC6126
Electrical Characteristics (Ta = 25°C)
Characteristic
Symbol
Test Condition
Min
Typ.
Max
Unit
Collector cutoff current
ICBO
VCB = 120 V, IE = 0
⎯
⎯
100
nA
Emitter cutoff current
IEBO
VEB = 6 V, IC = 0
⎯
⎯
100
nA
V (BR) CEO
IC = 10 mA, IB = 0
50
⎯
⎯
V
hFE (1)
VCE = 2 V, IC = 0.3 A
250
⎯
400
hFE (2)
VCE = 2 V, IC = 1.0 A
100
⎯
⎯
Collector emitter saturation voltage
VCE (sat)
IC = 1.0 A, IB = 33 mA
⎯
⎯
0.18
V
Base-emitter saturation voltage
VBE (sat)
IC = 1.0 A, IB = 33 mA
⎯
⎯
1.1
V
Cob
VCB = 10 V, IE =0 ,f=1 MHz
⎯
10.5
⎯
pF
tr
See Figure 1 circuit diagram
VCC ∼
− 20 V、RL = 20 Ω
IB1 = 33 mA
IB2 = 33 mA
⎯
30
⎯
⎯
500
⎯
⎯
40
⎯
Collector-emitter breakdown voltage
DC current gain
Collector output capacitance
Rise time
Switching time
Storage time
tstg
Fall time
tf
ns
Figure 1. Switching Time Test Circuit & Timing Chart
VCC
IB1
IB1
Input
RL
20 μs
Output
IB2
IB2
Duty cycle < 1%
Marking
Part No. (or abbreviation code)
4
Lot No.
M
Note4
Note4 :A line to the right of a Lot No. identifies the indication of product Labels
[[G]]/RoHS COMPATIBLE or [[G]]/RoHS [[Pb]]
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS
compatibility of Product.
The RoHS is the Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003 on the
restriction of the use of certain hazardous substances in electrical and electronic equipment.
2
2009-07-07
2SC6126
IC – VCE
1000
100
70
(A)
Collector current IC
Ta=100℃
50
DC current gain hFE
3
hFE-Ic
30
2
20
10
1
25℃
100
−55℃
10
5
IB=2mA
Common emitter
Ta=25℃
Single nonrepetitive pulse
0
0
0.2
0.4
0.6
Collector-emitter voltage
0.8
Common emitter
VCE = 2 V
Single nonrepetitive pulse
1
1
0.001
VCE (V)
0.01
10
(A)
VBE (sat) – IC
10
Common emitter
IC/IB = 30
Single nonrepetitive pulse
Base-emitter saturation voltage
VBE (sat) (V)
Collector-emitter saturation voltage
VCE (sat) (V)
1
Collector current IC
VCE (sat) – IC
10
0.1
1.0
25℃
0.1
Ta=100℃
−55℃
Common emitter
IC/IB = 30
Single nonrepetitive pulse
3
−55℃
1
Ta=100℃
0.3
25℃
0.01
0.001
0.1
0.01
0.1
1
Collector current IC
10
0.001
(A)
0.01
0.1
Collector current IC
1
10
(A)
Safe operating area
10
IC – VBE
100μs*
(A)
2
Collector current
IC
(A)
Common emitter
VCE = 2 V
Single nonrepetitive pulse
25℃
Ta=100℃
1
1 ms*
1
100 ms*
DC operation
Ta = 25°C
0.1
*: Single nonrepetitive pulse Ta = 25°C
Note that the curves for 100 ms, 10 s and DC
operation will be different when the devices
aren’t mounted on an FR4 board2 (glass-epoxy,
1.6 mm thick, Cu area: 645 mm ).
These characteristic curves must be derated
linearly with increase in temperature.
−55℃
0
0
0.4
0.8
Base-emitter voltage
1.2
10 ms*
10 s*
1.6
VBE (V)
VCEO max
3
Collector current IC
IC max (pulse) *
IC max (continuous)*
0.01
0.1
1
Collector−emitter voltage
3
10
100
VCE
(V)
2009-07-07
2SC6126
rth – tw
Transient thermal resistance
rth(j-a) (°C/W)
1000
100
10
Curves apply only to limited areas of thermal resistance.
Single nonrepetitive pulse Ta = 25°C
Mounted on an FR4 board (glass-epoxy; 1.6 mm thick; Cu area, 645 mm2)
1
0.001
0.01
0.1
1
Pulse width
10
tw
4
100
1000
(s)
2009-07-07
2SC6126
RESTRICTIONS ON PRODUCT USE
• Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively “Product”) without notice.
• This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.
• Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before creating and producing designs and using, customers must
also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document,
the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the “TOSHIBA
Semiconductor Reliability Handbook” and (b) the instructions for the application that Product will be used with or for. Customers are
solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the
appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any
information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other
referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO
LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR APPLICATIONS.
• Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring
equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document.
Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or
reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious
public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used
in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling
equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric
power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this
document.
• Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
• Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
• The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
• ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
• Do not use or otherwise make available Product or related software or technology for any military purposes, including without
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile
technology products (mass destruction weapons). Product and related software and technology may be controlled under the
Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product
or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.
• Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of
noncompliance with applicable laws and regulations.
5
2009-07-07