DESCRIPTION A RELEASED PER ER36094 2. MATERIAL SPECIFICATIONS: CONTACT: COPPER ALLOY. ALL OTHER METAL PARTS: BRASS PER ASTM B16. INSULATOR: TEFLON PER ASTM D1710. 3. FINISH SPECIFICATIONS: CONTACT: .000030 MIN GOLD PER ASTM B488 OVER .000080 MIN NICKEL PER AMS-QQ-N-290 (RoHS). ALL OTHER METAL PARTS: .000050 MIN NICKEL PER AMS-QQ-N-290 OVER COPPER PER ASTM B734 (RoHS). P/N 0345-E00-C7701N 0345-E00-C7701NU 4. ELECTRICAL SPECIFICATIONS: IMPEDANCE: 75 OHMS. FREQUENCY RANGE: DC-6.0 GHz. RETURN LOSS: <-20dB UP TO 3.0 GHz, <-15dB UP TO 6.0 GHz. DESCRIPTION SINGLE PACK BULK PACK BY APPD DATE DCam REV CY 11/30/11 NOTES: UNLESS OTHERWISE SPECIFIED 1. DESIGNED FOR USE WITH BELDEN 179DT CABLE OR EQUIVALENT. QTY 1 400 5. COMPLIANT TO SMPTE 424M (3G-SDI) STANDARD. 6. CONTACT, FERRULE SHIPPED LOOSE. 7. INTERFACE PER CECC 22230. 8. STRIP USE KINGS KTS-8-2. 9. CRIMP FERRULE .128 HEX AND CONTACT .042 HEX USING KTH-2021. 10. FOR CABLING INSTRUCTIONS SEE 3-661-1. .315 8.00 .152 3.86 .015 .38 .128 3.25 .070 1.78 .375 9.53 ( 1.167 29.64 ) WHEN ASSEMBLED .624 15.85 CATALOG P/N: 0345-E00-C7701N .312 7.92 .155 3.94 RECOMMENDED CABLE TRIM DIMENSIONS PER ASME Y14.5M-1994 UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN INCHES [MM] TOLERANCES: DECIMAL: .XX [X.X] ± .01 [0.3] .XXX [X.XX] ± .005 [0.13] .XXXX [X.XXX] ± .XXXX ANGLES: ± 2° SCALE: 2:1 THIRD ANGLE CUSTOMER SALES DRAWING DRAWN DW APPROVED WPM DMF026 B Winchester Electronics Corporation 62 Barnes Industrial Road North Wallingford, Connecticut 06492 DATE APPROVED 02/23/11 DCam DATE APPROVED 02/25/11 XXX DATE 02/25/11 DATE XX/XX/XX DIN 1.0/2.3 75 OHM PLUG FOR BELDEN 179DT CABLE (RoHS COMPLIANT) A SD0345-E00-C7701N SHT 1 OF 1 REV A